Having problems with your Fuji Digital Cameras ?

My Fuji S3 pro resets its ISO setting to 400 and F28 every time it is switched off or it times out

Answers :

Repair Help & Product Troubleshooting for Fuji Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Fuji S3 pro resets its ISO setting to 400 and F28 every time it is switched off or it times out

... Fuji Digital Cameras

EX-Z60 resets time and date every time its switched back on

The reason your digital camera keeps forgetting the time and date is because the system battery (looks like a watch battery) inside it needs to be replaced. Click on the link below to download the Casio Exilim Zoom EX-Z60 owners manual. On page 173, ... Casio EXILIM ZOOM EX-Z60 Digital Camera

I have a cannon powershotA720 IS & it won't keep the date & time so I have to reset it every time I switch it on. Can you help me or is it a faulty camera

You need to replace the date battery -- a button-style battery, CR1220. This battery is in a holder which fits into a slot right next to the regular batteries. Pull the holder out and be sure (for this model) that the negative side is up when putting ... Digital Cameras

I am trying to reset the time lapse limit on my go pro it will record 9999 images, I have tried removing the SD card and battery, but this only seems to reset about 50 images. any ideas? thanks Tony

... GoPro Digital Hero 3 Digital Camera

I have a kodak easyshare z915, when I try to use it it is as follows Memory card protected (reset switch on memory card) Go to Review any idea where this switch is or what this is about at this time I have 205 pics and can not delet nor can I take anymore thanks in advance Brenda [email protected]

If this is an SD card, the switch is on the side and should be in the unlocked position. ... Kodak Digital Cameras

I love A430. Now I am got one problem: data and time reset every time I switch off the camera. Otherwise everything is Ok. I already changed the small battery - didn't help. Please advise!

The small battery is still the problem. You say you changed it- did you get it in the right way round? I have bought assortment packs of these batteries in a thrift shop and found that many of them were dead from new, so are you sure that the battery ... Canon PowerShot A430 Digital Camera

Every time I switch it on it asks me to reset the date and time settings. The batteries are fine and I don't recall changing any setting to make it do this.

On the left hand side of the camera there is a little batter hatch, above a screw hole. It has a number written on it. Pull this out and replace the battery in it. This is the time and date battery. ... Canon PowerShot SX100 IS Digital Camera

KODAK LS753: when the camera is powered up the screen comes on to set date and time. The selector five way switch can move between set and cancel. When the switch is pressed straight in nothing happens. I was thinking there may be a hard reset somewhere on the camera to clear this glitch. Cycling the power does not change anything.

... Kodak EasyShare LS753 Digital Camera

The date and time fuction on my G11 keeps resetting back to '0' when I turn it on resulting in me having to reset which in turns opens up another file to store the photo's in for that shoot also the photo numbers are repeated although the filing is set to continuous. Any ideas??????

The next time you enter the date and time info, press the set/ok button twice. ... Canon PowerShot G11 Digital Camera

My Kodak C913 camera keeps telling me that the memory card is protected and to reset switch on memory card. This happens with a brand new 1 GB card, or on the 4 GB cards I have. (I have tried different cards and its always the same message that pops up) No matter how many times I reset the lock, I still get the message. I love the camera but have only had it a few months and its driving me crazy.

The switch should be in the unlocked position...is that where you have it? ... Kodak EasyShare C913 Digital Camera

Olympus 4050sw. when i switch on the camera it gives me an error message saying clean card (which i tried several times) or giving me the option to format. i've recovered my pictures from the card through my pc and the pc recognises the card and the pictures fine. now when i try to format it says "card error". I've even tried resetting back to default and it still says "card error". help! is there some way i can do a hard reset?

... Olympus Stylus / mju 1050 SW Digital Camera

My camera keeps saying memory card is protected, and that i have to reset the switch. well, i've looked at it and reset it probably a million times and it's still saying this... its starting t

The switch in the SD card 'socket' that detects the lock is probably broken ... Kodak EasyShare Z740 Digital Camera

My Nikon Coolpix 4800 is behaving strangely. In all shooting modes (except landscape, where it automatically zooms in completely and will not zoom out), it works properly. But in all menu modes it switches by itself every couple of seconds between the viewfinder and the screen and it cycles rapidly (with occasional brief pauses) through the menu items. By timing the cycling, I was able to reset it to the factory settings, but that didn't solve anything. Is there some way to reinstall or reboo

Off macro indicator ... Nikon Coolpix 4800 Digital Camera

Memory card i used wallmart site to download pics, with the usb, when i was done turned the camera back on, the message i get says memory card is protected, reset switch on memory card, i have done this several times and it is still there.i can not remove it or take pics, but i can get into the review option. help.

There is a catch inside the camera that is possibly out of whack. You need to make sure the camera itself is not moving the security slider on the memory card. This would be due to puting the card in wrong or just from wear on the camera. ... Kodak EasyShare C340 Digital Camera

Getting lens error message, i was able to reset the date but when i switch to take a picture, lens won't open. can this be fixed or is it time to buy a new camera?

Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Canon PowerShot A470 Digital Camera

I took a whole lot of photo's at a wedding - came home and nothing was there. whenever i switched on the camera it asked to reset the date and time and this even happened at the wedding

Most cameras won't begin to take pictures until the date and time are set. ... Digital Cameras

Fuji470 Mega Pixels I have just uploaded photos onto my PC from the camera and now the camera will not switch on. The screen will flash a couple of times and then stop. How can I reset it to turn on?

I believe you are talking about the camera screen.\015\012This may sound naive.\015\012\015\012Are you sure the camera battery is not dead?\015\012Try removing the battery and replacing it with charged battery and try switching it on.\011 ... Fuji Digital Cameras

I have a 3 year old Sony DCR-DVD202E Camcorder which has worked perfectly up until yesterday, when the lens cover refused to open. Other thsn this the camera powers up normally and the LCD screen shows a white dot where light is entering through the cover I have tried changing the battery, switching the camera on and off many times, powering it from the AC adaptor and, at the suggestion of Sony, resetting the camera. None of this has worked. It is possible to open the cover manually, so it is

Happened to me before. NO Problem!!! The mechanical lens cover is "powered" by a small spring. When a little bit of dust/dirt/sand gets into the track it slides in, i gets stuck. CAREFULLY open the lens cover (maybe with the help of a toothpick) and ... Digital Cameras

My Kodak C913 sometimes follows switch on with the statement memory card needs formatting. I have tried to do this several times but to no avail. I am then faced with a message which says that I should use a new card. I am now on my third card and I still get the formatting message. This does not happen every time I switch on but about 8 times out of ten. the other 2 times the camera works well whilst it is still switched on. When I switch off the problem re occurs. There is nothing wrong with a

First of all, stop putting your cards in another camera....this can corrupt the card. With no card in the camera, go into the menu and find "reset"...follow the on-screen instructions. Insert your card, turn on the camera and go into the camera menu ... Kodak EasyShare C913 Digital Camera

Date and time reset at power-on

Canon point and shoot cameras have an internal backup battery (a very small watch battery sized cell). Look under your battery door - do you see a small tab that has "CR1220" or something like that marked on it? If so - this is your backup cell. Just ... Canon PowerShot A510 Digital Camera

Blurry photos THe last few times I have attempted to use my camera I have had two problems. One, each time I turn it on it resets itself as if I have never used it and goes back to the language selection and and I have to reset the date (which I stopped doing because of the inconvenience every time I wanted to take a photo, so now all my photos say January 1, 2000). Also, every time I go to take a photo, the picture is blurry. I have tried to reset the quality, but it's not helping and, admitted

The problem with your camera is not that simple to correct. I can tell you that you can going to the setup menu and do a camera reset and see if that corrects it and if it does then great . I work on these types of cameras all the time and ... Casio EXILIM Card EX-S770 Digital Camera

Have a 20 month Optio E 40, today tried to switch on, lens woundnt come out, used the manual and switched on while holding arrow button, Playback piture showed in display, pressed half shutter to switch back and error message Lens error 113,0,0,0 appeared, Pentax want £80.00 minimum to look at it, can you help pleaseregards Terry

Try to take out the battery and put it back in. ... Digital Cameras

My samsung NV10 beeps 4 times and switches itself off every time I switch it on.The battery is fully charged,if I turn the top dial to play, it stays on and plays the photos the way it should but when you turn the dial to any of the other icons it beeps 4 times and switches off

... Samsung NV10 Digital Camera

Every time I switch on my Canon SD 1100 IS is asks me to set date and time. I set date and time and then it lets me take pictures. Next time I switch it on again it asks to set date and time. How could I get rid of this.

The camera's clock battery has worn out. Unfortunately, on most Canon SD series, this battery is not user serviceable. Recommend contacting Canon to see if they'll replace it, hopefully at a reasonable cost. 1-800-OK-CANON ... Canon PowerShot SD1000 Digital Camera

Every time I turn my camera on it asks me to set the time zone, area I am in, date, etc...again. It's causing problems when I download pictures. They're all out of order. Even when I reset the date, time, etc. it always asks me to reset it every single time I turn on my camera.

... Canon PowerShot S400 / IXUS 400 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1546 seconds