Having problems with your Fuji Digital Cameras ?

I have a finepix f402 and when i switch it on to camera or video nothing happens if i switch it on to review it is ok . the flash does not work either .when i go to the set up the auto on and auto off do no apper in the window

Answers :

\015\012Your camera's firmware is corrupt and need to be updated. The following are available updates for your camera. These are not links. The link to these drivers are below the list:

I think there is a problem with the connection to memory device in the camera as you can review but not record anything.
Possible cause could be that the connection to certain features has been affected.
If you can use certain features it means there is not a major fault but a minor one.
I advice you to take the camera to a nearby repair shop to get it checked.

Hope this helps

Repair Help & Product Troubleshooting for Fuji Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a finepix f402 and when i switch it on to camera or video nothing happens if i switch it on to review it is ok . the flash does not work either .when i go to the set up the auto on and auto off do no apper in the window

Hi,\015\012\015\012Your camera's firmware is corrupt and need to be updated. The following are available updates for your camera. These are not links. The link to these drivers are below the list:\015\012\015\012 ... Fuji Digital Cameras

My Pentax K10 is not working. Upon switching on,no response at all, after few seconds batt indicator show up on the small lcd window at the top. Nothing could be seen on its LCD MONITOR, shutter, auto focus and flash is working. Just like dead set except for some functions mention above are working. Help please. Thanks in advance

... Pentax *ist DL Digital Camera

I have a Canon Power Shot A720. Outdoor photos are beautiful. Indoor photos are always grainy/blurry...a lot of noise. I have tried the ISP feature but there are only two choices... 1. Auto or 2. High ISO Auto Either setting, the indoor photos are grainy. Further, there are times when my flash will not work. It won't work on Auto setting or when I try and "force flash" it. No flash and the photo will not allow a picture to even be taken. Any suggestions? Thanks

This is probably the solution:\012 Wont take pictures with flash ... Canon PowerShot A720 IS Digital Camera

Good Morning I went hiking in broad daylight this past weekend and the autofocus would not work. I have a Canon 40D with a TAmron 18-270. I used av, tv, p, m and auto and I could not autofocus the camera. All I could do is to switch to manual focus to get it to work. When the lens was set to AF all you could is hear is it racking back and forth tying to focus. VERY FRUSTRATING.. Any ideas of what it may be or a setting I might have set accidentally. Any help is appreciated. Bob

Did you set a strange auto-focus point? ... Canon EOS 40D Digital Camera

Hi. I have a Canon Xsi/450D Camera. I can access the menu funtions when in the preset modes eg. landscape, sports etc. but when i rotate the dial past the Auto mode into the manual settings modes(the creative zone as canon calls them) the menu funtion will not work. I push the menu button and nothing, the remote funtions will not work either. I've tried to update the firmware, but as you have to access the menu in the manual modess to do this i cant update the firmware either(also cant do

The manual mode runs off power from a separarte capacitor. The capacitor holds a charge which is greater than the voltage of the battery for the needs of this option. When a capacitor fails nothing will operate in the manual mode. You will need to ha ... Canon EOS Rebel XSi Digital Camera

Not really sure if this is a problem? I have an Olympus E-500 and E-510. When I changes settings on the E-500 (ISO, White Balance, Auto-Focus Mode etc.) it remembers them when I switch it off. The E-510 doesn't. Is it supposed to work this way or is there an obscure setting I need to change? It remembers the time and date and the quelity settings ok. Thanks in advance for any help you can give me.

If you are shooting in the Auto mode and make the changes when power the camera off it will reset back to factory defaults. If you change the dial to P mode, make those same adjustments and power the camera off and then on again it should maintain t ... Olympus Digital Cameras

Camera is 5 years old, It has been working fine. Batteries had become low and when I put new batteries in the camera switches on. the , the flash open, the viewer window lights up with set time and date option. The program dial shows low battery but I have tried three different sets of batteries. I have left the camera turned on as I write this and after a few minutes the lens does extend but when I tried it again it will no extend immediately as it should.

Make sure the batteries are the correct type and voltage for your camera. Also because of the age you may have corrosion on the battery contacts inside the battery compartment. If this is the case then no matter how many batteries you try they will n ... Digital Cameras

The flash is either far too bright or not bright enough even when using the auto setting. The flash either doesn't flash at all on "soft flash" and then blinds people when the flash is turned on so it produces very dark faces or bright white images. I've tried using different scene modes but this does not seem to work.

... Casio Exilim EX-S880 Digital Camera

My Canon A460 says the Card is locked. The lock switch on the card is set to unlock. I have another camera with a similar card. Both cards work in the other camera. neither card will work in the A460 both say Card Locked. It must be something in the camera. I have tried the turn off remove card turn on take picture. No card message. Turn off replace either card and see Card Locked.

Back up your data first,thenyou reformat the memory card in the camera.i guess you have formatted the memory card in another device.canon cameras generally do not accept cards that have been formatted in another device.then sitch off the camera and r ... Canon PowerShot A75 Digital Camera

My moultrie camera works fine in setup mode, laser and infrared work fine, but when i switch it to auto mode, it turns off 10-30 seconds later, sometimes it take a picture or two before it turns off, the status light never comes on either, batteries are brand new, whats the deal??

Hi,If the setting are Fine and you have already checked the batteries, It sound like this is an electrical problem. Make sure all connections are secured and tight. Take out the Battery and again put it back ON after few minutes. This wou ... Moultrie GameSpy 4.0 Digital Camera Deluxe

Hi, I've just recieved my nikon d90 back from a repair and service, and although everything appears to be working fine, whenever I want to change shooting modes,( auto, P, M, flash off etc), they only work once I have selected them, and then turned the camera off and back on. In other words I cannot be shooting in the Auto mode and then switch to "flash off auto"....all that happens is that the auto focus works but the shutter will not operate. If I switch the camera off and on however, I can t

I'm going to assume at this point that the camera has been serviced correctly. What I'd suggest is that you look in your manual and find where you can reset your camera back to the factory default settings. Okay here are a few thoughts that might be ... Nikon D90 Digital Camera with 18-105mm lens

Nikon D80 with a Sigma Lens (80 to 200 I think). In manual mode, often shutter won't release - this was a close up of a hummingbird with a fast shutter speed. Internal light meter showed underexposed, but the background was dark green. Initially, the shutter released, but later would not operate either with a remote, or by manually depressed the shutter release button. Switching back to auto, the camera seemed to work fine, but in this mode could not get the desired shutter speed. In full manual

In full manual, yes it should. ... Digital Cameras

My view window is dark and the auto setting wont work, is this related to the iso?

It is the sensor. I went through the same problem on my camera. It was a nikon and it didn't work and got a new one for reasonable price and now it is working. Digital cameras are design to work about two years. ... Nikon D90 Digital Camera with 18-105mm lens

My nikon d40 wont take a photo with the standard lens unless I switch it to manual but when I put the telephoto lens on it works in both auto and manual. How do I get my standard lens to work in auto (the "a" switch on the lens)? It has worked in auto in the past.

Hi,\012\012Sorry to hear about your lens. If you are able to take pictures with a telephoto and any other AF-S lens, then it means that your problem lies with the standard lens. With standard, I assume you mean the kit lens. If you can take pi ... Nikon D40x Digital Camera

The auto setting stopped working - I usually always had it set on Auto, then "Auto" became video (same setting as video setting) for some reason. Now, it won't take pics on certain settings and only lets me take pics on a fast setting, so pics always come out blurry. Sometimes won't let me view or forward through pics. I've charged battery. Do you think I need to replace the battery?

... Canon PowerShot S60 Digital Camera

Blurry pictures My camera has two settings on the front. One is to take still pictures, such as flowers, the other setting is for action shots. My camera will not switch back to the action setting. There is a switch on the front of the camera. I have switched it to the right position, and it won't work. I have also taken the batteries out of the camera and switched it again. No dice. This sucks because I am missing a lot of good pictures of my kids. please help.

Hi:Try this... Go to the setup menu and RESET ALL. Then test.If this does not make a diff.then the camera may need repair.Here is a support you could call or email:Go to:\015\012http://vivitar.com/en-us/Support.aspx ... Vivitar ViviCam 5100 Digital Camera

Sometimes the autofocus doesn't work. It is switched to af. When I turn the camera on it will normally focus but after 1 or a couple of pictures it will not autofocus. If I move the switch to Manual I can take the picture and then if I move the switch back to m/a it will focus and keep focusing and I can take a few few more frames then then the auto cocus stops working again and I have to switch back to M and so on. I never know when it wount work. Thank you.

Having received no response in over a month, I assume this is no longer a problem. ... Nikon D70s Digital Camera

Hi. I have a problem with my Panasonic DMC LZ1. Has developed a fault. When powered on with charged batteries and memory card inserted, the camera doesnt do anything on any setting except the review (arrow indicator) setting. The review setting only works if you 'power on' on this setting. (You can see photos on the memory card). If you power on -on a different setting and move the dial to review, then review doesnt work either. Neither the display (except for review as above) or lens wor

... Panasonic Lumix DMC-LZ1 Digital Camera

Camera Frozen When I turn on my DMC-FX07 none of the buttons work. The zoom doesn't work, the menu button doesn't work, the flash settings dont work. It won't switch from current picture when in viewing mode. I have tried all the picture wheel settings and every one is frozen. I have trie pushing and holding every button and removing and replacing and recharging the battery several times. When I replace the battery the autofocus works but then it freezes (when in heart mode) with the backli

Hi,I tried Option No.1 successfully when my Panasonic DMC-FZ7K froze once:Option No1:1. Try turning the camera on with the battery inserted.2. Now remove the battery while the camera is on. ... Panasonic DMC-FX07 Digital Camera

I can not get the auto flash to work The screen shows on the left: iso auto, a box, M1 on the right the flash symbol A, auto, steady hand symbol, 1375 I try to take a picture and the camera won't take unless I turn off the flash. I have tried to change many settings in the function area, but I can not figure out what I accidentally changed in the first place. please help me to get my camera to work in the auto mode again

I have this same exact problem. When you say "repair it," how? ... Canon PowerShot A720 IS Digital Camera

My Nikon D-40x has an auto focus that won't auto focus. Becasue it won't focus, it won't take a picture with the lens set to that mode. One day the camera worked fine. I put it up in the closet for about 5 months while working odd hours. Took it down removed it from the case, charged the battery and it just won't work. It died all on it's own....Replaced the battery, same result.

When you store a unit with a battery even if there is no obvious signs of corrosion at the contacts of the battery terminals doesn't mean that there is none on thecircuit board it'self. if you feel comfotable doing this remove the back cover of camer ... Digital Cameras

I got my Nikon D5000 three days ago and fiddled with it for a few hours, and now I can't get the auto focus to work, it will only work on manual. Are there any settings which prevent auto focus from working, or any thoughts on how to fix it?

If you've set the lens switch to auto focus and if it still doesn't work, probably you need to reset your camera.<br /><br />You can do this by switching on your camera and PRESS and HOLD together the 'info' button near the shutter releas ... Nikon D5000 Digital Camera

My Nikon D40x won't auto-focus. When I press down the shutter button, it won't do anything at all. If I switch to manual and back to auto, it works for 2-3 shots, and stops working again. If change shooting modes from single to timer and back, it might work for a couple shots. I have not been able to find any other solutions. Any suggestions?

Try cleaning the contacts on the camera body and lens where they meet with a cotton swab lightly dampened with rubbing alcohol ... Nikon D40x Digital Camera

I have a Nikon D80... a year old. The following functions/buttons stopped working for no apparent reason in the same time frame. - holding the delete and metering mode buttons together to format memory card. (however the buttons independently work fine) - holding the WB button (set to PRE) to set preset white balance. - when camera is on... turning the power switch to the "bulb" symbol to illuminate the control panel on top of camera not working. thank you for any help you can off

You have the latest firmware installed already and you said you updated again just to be sure.Certain button combinations that used to work don't and the buttons work independently.Sounds to me like the BIOS chip itself is cor ... Nikon D80 Digital Camera with 18-135mm Lens

My built in flash won't fire in dark sceneries, it worked fine a coupl of hours ago. Every setting is in auto, Is it related to other setings? The camera works fine in bright areas except during the dark due to the flash freezing the shutter. Can I fix this with setting adjustments? I already tried using the master reset but it didn't work.

HelloThank you for using FixYa for your problemAlways check the batteries first but if is it still giving the same fault, your camera is faulty. It should be taken to an authorized repair centre for a repair ... Nikon D60 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3029 seconds