Having problems with your Fuji FinePix 2600 Zoom Digital Camera ?

Lens won't come out to focus. Camera was dropped lens appears to be in tack and the lens does attempt to zoom when you hit the button. Is the camera doomed? Or had the lens simply come out of its tack?

Answers :

Fixing a Lens Error on a Digital Camera
\015\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\015\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\015\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\015\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\015\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\015\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\015\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\015\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\015\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\015\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\015\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\015\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\015\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Fuji FinePix 2600 Zoom Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Lens won't come out to focus. Camera was dropped lens appears to be in tack and the lens does attempt to zoom when you hit the button. Is the camera doomed? Or had the lens simply come out of its tack?

Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Fuji FinePix 2600 Zoom Digital Camera

Last time I tried to turn on my camera (Samsung SL502) the lens came out but the screen didn't come on. I hit the power button again and nothing happened, now the lens is extended and won't go back in...pressing the power button does nothing but the camera makes a funny sound. Please help. Camera is 6 months old.

Sounds like the lens mechanism is stuck - mine does the same thing after my 2 year old dropped it on the cement. Looking for a replacement lens now, but not having much luck. Read the previous posts for other solutions. Good luck! ... Samsung SL502 Digital Camera

I have 2 pentax optio m20 cameras purchased at the same time. Both have developed the same problem: hit the on button and it tries to come on, but makes a funny sound, lens moves in and out trying to focus (screen is lit showing focus changing and green mode icon), then the camera shuts off and never gets into picture taking mode. I fixed one of the cameras once by pushing buttons after connecting and disconnecting from the computer (and the camera worked okay for several months), but repeate

Your previous diagnostic definitely\015\012 indicates a mechanical problem, once the possibility that a false \015\012sensor signal to the main board as the cause by resetting all functions.\015\012 It is very likely that ther ... Pentax Optio M20 Digital Camera

I have this camera and the lens is locked open. When I put new batteries in it, I hit the power button and it will come on, if I touch anything...the camera does a loud 3 beep then shuts off. Lens still open. Is it hopeless?

Try removing the memory card if you have one and see if that make a difference. Some cameras and cards do not get along.If still same thing, try removing the batteries, press and hold power button for 5 full slow seconds, wait 10 minutes, ... Samsung Digimax S500 Digital Camera

Hey guys I keep getting the error; remove lens cap and push I> button I dropped the camera after tripping over the tripod. (The lens housing hit the concrete and its been no go since then) Ive read your recommendations that the lens will have to come off and as my warranty doesnt cover accidental damage Im thinking of takin it apart tonite, what do you think?

If you don't want to pay for the (expensive) repair, then stripping it down and checking that the lens motor, cogs and housing and moving correctly. It's not for the faint-hearted, but it's not really complicated… the Instructable for the FZ5 ... Panasonic Lumix DMC-FZ8 Digital Camera

Lens trouble My lens will not come out entirely on my camera, for when I push the button to turn it on, the lens tries to completaly come out but then quickly retracts back halfway and remains stuck about halfway open. The screen is black and the light flashes red everytime I turn on the camera, along with a noise of something stuck. I have tried using that little button that someone told me was the reset button, along with plugging it in, and charging it. None of this has helped me with fixing

Appears to be a repair issue... lens track may be off ... Olympus FE-280 Digital Camera

I have a HP camera CW450t camera and cannot turn it on with the power button on top. I know the batteries are good because I can turn on the camera with the review button and review the pictures that I have taken. When the power button is pressed the green light on the back of the camera flashes but the lens does not come out and the led screen does not come on. when you take your finger off of the on/off button the green light goes off as well.

Had the EXACT same problem with the CW450 model. I called support because I was mad and wanted it replaced. The support tech helped me through the issue. The answer is- NiMH. Alkaline batteries are unstable and not powerful enough for use with this c ... HP Digital Cameras

After taking some pictures I wanted to delete them. Instead of hitting the MENU button I hit the SET button and a red light came on and was flashing. I pushed on the OFF button to shut the camera off. It would not shut off.So to shut the camera off I opened the battery door and the camera shut off. I went to turn the camera on and will not come on. I changed batteries still will not turn on. WHAT DO I DO??...JERRY

Hello Jerry, First make 100% certain that the battery is charged, also that you dont have a bad connection.The S2 has a small cell battery for storing the date/time ect under the battery flap, try removing and re-inserting it, but ... Canon PowerShot S2 IS Digital Camera

LENS ERROR my nikon s210 is giving a lens error. I have tried the light tapping, slightly pulling on lens, and many others with no response from the camera.HELP? i got that lens error coming up after i dropped the camera, but i was suprised it did any damage because it lightly hit a soft chair then i caught the camera before it hit the ground, seems extremely fragile to me! the lens was stuck out but then i pushed and wiggeled the lens, turned it off and on and the lens went back in and the lens

You are basically right. Its basically as easy to replace as it costs to repair, unfortunately those are your options. You could inquire as to an estimate to make your decision easier, or locate an independent repair shop as they may be cheaper. The ... Nikon Coolpix S210 Digital Camera

The camera was working fine until I purchased a pack of kodak rechargeable batteries. After a week or so of using them my camera stop coming on when I would press the power button, it would make this beeping noise and the lens wouldn't extend. After continuously pressing the power button I got it to come on but again the lens did not extend and the screen was frozen. Why am I having this problem and how can I fix it?

Having gone over a month with no response, I assume this is no longer a problem. ... Samsung Digimax S600 Digital Camera

I have a Canon Powershot S3 IS and I was looking at picture I had taken and the lens was retracted. I switched to the camera mode and the lens started to come out and hit my leg and stopped half way. The lens went dark. I turned it off to retract the lens and then turned it back on. The lens came all the way out but the screen is still black and I could feel the camera and just barely hear it making the noise it makes when the lens is coming out but it was already all the way out. I switche

Format ur memory card ....and replace the cells.....might work...contact the customer care for help ..they mightr be able to fix it ... ... Digital Cameras

EX-S500: * I turn it on and the 'Adjust' screen comes up. *I press the 'Menu' and the lens comes out, the green light flashes for awhile, it beeps a few times, it grinds a few times and shuts off. The lens stays out. *I turn it back on, the lens goes back in and the 'Adjust' screen comes on. * I press the power button and the camera goes off. *I left the camera in the charge gradle all night and the battery did not charge. *Help

You could have a power and lens issue, going on at the same time here. There's a couple of web blogs that delineate things you can try to correct these issues, and here they are:\015\012 ... Casio Exilim EX-S500 Digital Camera

Canon SD4000 camera, when hitting the power button, the screen remains black screen, the green light blinks twice, lens zooms out, shutter opens. Screen remains black, and I do not seem to have any control at all; pressing the zoom button doesn't move lens, no notable reaction to anything. Hit the power button again, the lens zooms back into it's original position, shutter closes (occasionally does not shut completely), green light blinks twice, screen remains black. Tried turning on w/o SD card

... Canon SD4000 IS IXUS 300 HS Digital Camera

My M763 kodak camera lens is out, and when the power button is hit, the camera just turns on for a few seconds. I have gone to each section on the camera and it won't work, even the favorites section. I have hit each button while still holding down the on/off button. I don't know what to do, Please help!

Try this link:\015\012\015\012http://www.fixya.com/support/r4696998-camera_lens_not_extend_retract_maybe_bat\015\012 ... Kodak EASYSHARE M763 Digital Camera

Camera stalling The problems started after using my camera on a windy day at the beach 3weeks ago. After a few days, the lens started getting stuck, and wouldn't come out, or if it did, didn't focus properly. This problem was intermittent. Then, in the past several days, the camera systems stall when I switch it on. The lens comes out and zooms fully. but It will not respond to any of the control buttons. Which part of the camera is the problem? is it fixable? How much is the estimated cost of r

This problem is related to your lens , because even if the lens extend fully and for the past things that happened on the camera there's a big chance that some dirt get in to the camera that causes the problem. What you can try first is to take the b ... Panasonic Lumix DMC-FX7 Digital Camera

My fuji finepix f10 camera lens does not open.there is a clicking sound whe i press the on button and the red light fully charged button comes on when i plug the charger into the mains. have tried new battery but no good. As the lens will not open the camera does not power up. help

Try these procedures. ... Canon PowerShot SD500 / IXUS 700 Digital Camera

My Kodak Easyshare M7623 Digital camera will not come on. It is completely charged and the lens is out. When i push the ON/OFF button the screen comes on and quickly goes of. The lens remains out the entire time. It also makes a clicking noise when on on/off button is pushed.

Here are the steps:1. Make sure you will install a new or fully charged battery/batteries into your camera.2. Clean the battery contacts.a. Remove the battery/batteries and the memory card from your camera, then wi ... Kodak EASYSHARE M763 Digital Camera

When i push the on/off button on my camera, the lens will open and the camera wil either not come on or come on for a second then turnoff- but the lens will stay open? some times i will have to enter in the date. is this the battery? i have not had i for that long- maybe 8 months

First, the battery should be charged fully, and it should be a LiIon battery pack from Kodak, not alkaline AA or NiMH AA.\015\012\015\012Also, if it is losing the date, there is sometimes an internal battery that has to be changed at the ... Kodak Easyshare M341 12.2MP Digital Camera with 3x Optical Zoom and 2.7-inch LCD

My olypus fe-360 cam's lens wont retract or extend unless the battery is taken out. When the power button is pushed the camera's lens comes out as it should normally, but the screen is blank and it beeps If I take out the battery and put it back in the lens does retract back into the camera. I have not dropped this camera nor have I gotten it wet... what do you think the problem is?

... Olympus FE-360 Digital Camera

Olympus SP- 550 UZ , Model number Sp -550 UZ, L 08208054 UO 18x optical zoom - 28mm wide, Digital Camera DC 6V As soon as the power button is pressed, the screen lights up the lens comes out with a message "Zoom Error" and the lens immediately goes back into the camera. I can also hear light clicking sound as the lens goes back into the camera. This problem has been going on occasionally and then I could see the object to be photographed. Now for the last few days I am unable to take any pictur

... Olympus SP-550 UZ Digital Camera

Hi there, im having a problem turning on my camera. I press th on/off button and the len comes out but suddenly the led below the "M" button flashes red and gets turn off, but if I press "viewing pictures" button, the camera works ok showing all the pictures and says that the baterry is full. I already cleaned the contacts, from the batteries and from the camera, and it still doesnt work. What could it be?

When u prefer normal camera function,camera will shut off,becaz in camera mode, the flash unit gets charged,since the flashunit is defective,the camera gets off.So, change the flash unit . ... Polaroid i531 Digital Camera

Batteries are fully charged. I can turn my camera on and look through my pictures, go through all the menus, etc., but as soon as I hit the button to take a picture, the camera just shuts off. I can immediately turn the camera back on, but it makes a strange clicking sound before it turns on. My lens is stuck out because even if I turn the camera on and turn it right back off manually, the lens does not retract. The camera was purchased in winter of '08 and I've had no problems whatsoever with i

Possible that the shutter or the focus mechanism is faulty and will need to be opened. Only if you are competent must you attempt to remove the camera as the mechansim and circuit will be delicate which needs experience. Ohter wise the best option is ... Digital Cameras

Digital camera I have a digital camera (Pentax Optio A10) and just recently the camera stop working. Every time I turn on the power button, the lens zoom out and a few seconds later the camera will turn off, and the lens will come back in. I bought a new battery thinking it help, but it still does the same thing. The camera is not even 2 years old yet and I paid over $300 for it. HELP?!?!

I had almost similar problems with my A10 from day one. The camera shuts down before the battery is depleted, most of the time while I was operating the zoomlens. I bought a new battery, but that didn't solve it. Later I decided to take it apart as a ... Pentax Optio A10 Digital Camera

Lens error i pressed the on button, it comes on but the lens dont come out and an error message appears "lens error" also the lens not totally in or flat in the camera.

OK you are probably going to think I am loony giving you this advise But No I am completely sane!Get a can of compressed air OR acces to a compressor at your local garage Get them to fit the triggered air blower tool to it.Blo ... Nikon COOLPIX S710 Digital Camera

When i press the power button to turn on the camera, the lens does not come out as it should - I get a "Lens Error - will shut down automatically - restart camera" appear on the screen - My Camera is the PowerShot SD1400 IS Digital ELPH - I have only had this camera for a few months

See Lens Error ... Canon PowerShot SD1400 IS IXUS 130 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5431 seconds