Having problems with your Fuji FinePix 2600 Zoom Digital Camera ?

Problem Camera displayed : card is not initialized



Answers :

My camera which was working already suddently stopped working. When I want to do anything on this viz. try to take a new snap or try to erase any/all frames, on screen I see "card not initialized". I have cleaned the smart card with a soft cloth, but no results have been seen.
Repair Help & Product Troubleshooting for Fuji FinePix 2600 Zoom Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Format Error I have a SDSC-W55 with a 2GB SanDisk memory card. On a recent vacation, the camera just stopped taking pictures and displayed FORMAT ERROR on the screen. The card was half full and the battery had sufficient charge. I was initially able to display the pictures I took so I stopped using the camera. Now I cannot display any pictures at all. The camera displays the same error. My PC will not recognize the memory card. If I pull the card, the camera and PC works fine with the inter


This kind of problem is called "Format Error" and often happens to memory card or USB flash. \015\012\015\012There are many reasons may lead to this. Like pull out the card without power off or fall the memory card onto the ground, ... Sony Cyber-shot DSC-W50 Digital Camera

NIKON D70 I have a Nikon D70 Whilst taking a series of photographs I get through to about 40 images then the camera stops shooting and the format card display comes up on the display. If the CF card is removed the images taken are ok and can be down loaded. If the card is then replaced without deleating the images then further images can be taken until the problem re-ocurs. I have tested the camera by taking a full card of images all at once and there is no problem. The issue seems to ocur if th


Problem in card holder repair or replace ... Nikon D70 Digital Camera with 18-50mm Lens

Dear Camera expert, I bought a brand new Nikon dslr D80 a few weeks ago. From day one I tried to know the Camera, I found problem when I go to cameras "custom setting menu" at rear screen. It displays No memory card? Lock. Whereas there is always a memory card. No. of shots are erratic: Some times there is one shot and no shot further and No memory card display remains on rear screen. Sometimes I am able to take more shots but problen of No memory card display remains Regards, Ja


Hi,I know this is really irritating display and this is a common problem with canon and nikon camera's.Turning off this little annoying feature can be easy or challenging, depending on which camera system you are using.For ... Nikon D80 Body Only Digital Camera

File error very so often after clicking a few photographs the camera shows FILE ERROR . On the first review the camera displays the photograph there after the photos are lost. the only solution to the problem is to format the memory card after which it clicks a few photographs & then the same problem occurs. is it the problem of memory card or a problem with the camera


It could be either. There is not any way to tell, but if the problem is too bad I would replace the memory card first and then address the issue within the camera if it continues.\015\012\015\012David Millier\015\012Advance Camera Repair ... Sony Cyber-shot DSC-H5 Digital Camera

When i switch on my nikon d100 camera it displays the "E r r " (r o6) message and when i try to shoot the message still persists.what should i do? initially whenever it could happen i would just change the memory card or the battery and it goes but now besides having done all that, the problem has persisted...!!!!!!! i urgently need your help.


You have two error messagess. !. the r06 message is an estimate of how many remaining pictures the memory card can hold and 2. ERR-is usually a camera malfunction. turn off camera remove and replace the battery. If that does not do it, then if your ... Nikon D100 Digital Camera

Problem Camera displayed : card is not initialized


My camera which was working already suddently stopped working. When I want to do anything on this viz. try to take a new snap or try to erase any/all frames, on screen I see "card not initialized". I have cleaned the smart card with a soft cloth, b ... Fuji FinePix 2600 Zoom Digital Camera

The camera accepts a memory card of 256 MB but rejects a new memory card of 4 GB, initially I thought it was a card problem so exchanged the card for a new one of the same capacity but still the same problem - could it be that the camera is not capable of working with a high capacity card.


Your camera can only use standard SD cards up to 2GB capacity, and even then they must be formatted to FAT16 and not the usual FAT32 used on most pcs these days. Standard SD cards actually go up to 4GB and your camera would accept those with a suitab ... Panasonic Lumix DMC-FX8 Digital Camera

Hi. I have an s2 pro fuji camera. bought a new 4gig x133 CF card. inserted - camera says "card not initialized" computer does recognize the card. formatted it on my pc, still the same problem. Can it be that the card's too modern for the camera? what else can it be? the camera does recognize my old 512mb x80 card. please help. Thank you.


I believe the max size memory card the S2 Pro will accept is 2MB. ... Fuji FinePix S2 Pro Digital Camera

When I insert the CF card, and then turn the camera on, I get a reading that the card needs to be formatted. I then try to format the card, and it says that the card cannot be formated. I looked inside, and the pins appear to be fine. I just received the camera about a weeks ago, and have alreay taken photos with the camera, and had no problems with the CF card initially.


If trying another card doesn't work then reformat your CF card in your computer choosing a Quick Format option. Then place it in the camera, do an immediate card format in the camera. If you've got images on the card now DO NOT SHOOT ANYTHING on the ... Canon EOS-5D Digital Camera

My Nikon digital camera model E7600 displays "This card cannot be used". I haved taken pictures and used this card with no problem. This card was not removed from the camera and was working fine when this message came on the screen.I tryed a new card and got the same message. What must I do to make the camera work properly?


I think there is some problem with your cameras memory card slot. this can be also due to the card lock status that is not getting back to the normal state. do you lock card sometimes while using it to prevent accidental delet ... Nikon Digital Cameras

I am having the same problem with a brand new Fuji FinePix Digital Ca mera. I took about 1000 pictures looked at them on my computer and then when I was done and put the card back into the camera I got the card not initialized message and now all my pics have dissapeared and no one can get them back, Is there a problem with these cameras? Not very happy that I lost all my families Disney Vacation pictures!


Hi,\015\012\015\012I don't think the problem is on your firewire since it still charge your camera. I suspect your camera driver get fail. Please re move and reinstall the driver on your computer and get them paired again.\015\012\015\012 ... Fuji FinePix S5200 / S5600 Digital Camera

Optio E10 When I turn my camera on I get an error message that says "memory card error", I purchased a new memory card but still get the same error message...any suggestions? I have the exact same problem with my Pentax Optio S7. I turn on the camera and it displays the message Memory Card Error. I have tried several new cards and get the same message. There is an option on the menu to format a card, but you can't access the menu if you have the card installed. It takes great pictures without t


HelloOK, if the memory card itself is locked, you might \012sometimes get this error code. All you need to do is to take out the \012memory card and switch the lever on the left side to the unlock. ... Pentax Optio S7 Digital Camera

Fuji camera S7000 saying CArd not initialized or card error! we've changed through 7 memory cards all that work great on other cameras!! Is the problem from the camera?


Card reader of the camera must be defective,get it service3d ... Fuji FinePix S7000 Digital Camera

My canon Digital IXUS 8015 says card locked when I try to take a picture. I can access photos taken last month on the same card Today when I tried to take a photo the camera beeped and displayed to following message "card locked". I removed to 4GB card and checked the tab was set to unlock. This did not rectify the problem. The card will work in another camera. Any suggestions?.


Your\012 camera uses SD memory cards. On one edge is a slider switch: towards \012the electrical contacts is the unlocked position and away from them is \012locked. Unfortunately, the switch is easy to move a ... Canon PowerShot A530 Digital Camera

Fujifilm S5 Pro Camera laid still for 1 month not charged. Initially when turned on it refuse to see main original battery as charged. After cleaning of contacts-it saw it. Ok. Solved. But, main problem: Camera don't see no one from four 4Gb CF-cards, which it saw wonderfull before. Actually-raction on card inpup taking place-[-E-] changing to [ ]. But as You can see-no frame counting, and camera dont turning on with CF inside, only if it token out of camera. No idea how to solve and


Hi,\015\012\015\012If the card contacts is not perfectly seating on the card or if the card is corrupted you may get the E error, when you switch on the fuji camera..\015\012\015\012First connect the card to the C ... Digital Cameras

Card problem My camera keeps sayin ''card not initialized'' and i go to my format options and press ok for the format but then it says card error, so i turn it off and then back on and it it says card not initialized again please help me


Could be a problem with your card, if possible try connecting the car to the PC without the Camera, maybe through a printer if you have media slots.. then try going to my computer and right click on the card and format\015\012\015\012If ... Fuji FinePix A350 Digital Camera

Card-Cover open My card -cover open message keeps me from not being able to take or retieve pictures that are already taken. What can I do? I replaced batteries and memory card without the problem being solved. What can I do ?                                                                                  FRUSTRATED When you turn the camera on, the screne display reads "card-cover open". My daughter is unable to use the camera. Is there anything we can do to resolve this issue ourselves? Thank


According to Olympus Tech Support this is a Sensor issue and requires repair. They quoted $86 for repairs...to me that is just not worth it, I have the same issue but purchased a good used camera on ebay for only $40! Good luck, sory I couldn't hel ... Olympus Camedia D-435 Digital Camera

I put a 4.0 gb sd card into the camera slot correctly. The camera says that the card must be formatted to work correctly. I format the card, but it just tells me I need to format again. There were pictures on the card initially and after the C643 tried to format, I rechecked and there were still pictures. I deleted all the pictures, and then tried to re-format, however I still get stuck in the format again and again loop. What exactly can I do to correct this problem?


I am of the opinion that this camera is only able to use cards of 2MB and that 4 MB SD cards are not suited to it.please rate my help++++Thanks for using FIXYA ... Kodak EasyShare C643 Digital Camera

When I turn the camera on, the canon logo appears on the display and the red light in back above the menu button keeps blinking, but nothing happens. When I turn it on in the "taking pictures" mode or "view pictures" mode, it just hangs and acts like it has trouble reading the CF card. I've tried multiple cards and had the same problem, so I think it's the camera and not the cards. Any ideas?


Canon logo is starting of camara indications just as company manuals ... Canon PowerShot S1 IS Digital Camera

Card problem when the camera is turned on, "card not initialized" keeps popping up, the camera wont take pics either how do i get this to change?


Hey abbytho,\015\012 The most common reason for this message is the memory card or the internal memory is not formatted. If you don't know how to do this the directions should be on page 75 of your manual. If this does ... Fuji FinePix A500 Digital Camera

The camera when switched on displays in the top lcd display 'Err' yet shows battery as fully charged. ive reformatted my memory card via pc. changed the lithium cr 123a batteries for new ones. fully charged the 4 x AA batteries. the aperture ring lock is set to 22 on the 28mm-80mm af nikkor d lens. i have it set to af and auto but have tried all other camera setting i can access. it will focus no problem yet will not allow me to do anything else. i cannot access the menu eg func, play, in


Hi.Err means that the camera is in fault mode. There is no code, so that the fault is generic. This kind of error is often associated with shutter problems or other loens error. If you have a spare lens, remove battery and test the spare ... Fuji FinePix S1 Pro Digital Camera

Hi my finepix s5700 camera displaying card not initialized i bought this camera in 2007 how do you initialize it. thanks


First, download any pics from the card using a card reader if necessary. Then, go into the menu and find "format"...follow the on-screen instructions. ... Fuji FinePix S5000 Digital Camera

Lens cap off but pictures all black. Tested another SD card same thing happens. Black on review on camera and black when put SD card in computer. Camera a few years old and never had a problem before. Flash works and all other displays look fine??


Hello,\015\012\015\012Is this a Canon ? If it is, you need to call Canon. You might have a CCD sensor failure. \015\012\015\012Take a look at ... Pentax *ist DL Digital Camera

Canon EOS Digital Rebel XTI 400D Displays Err 99. Problem with CF card. Replaced with brand new card-still same err 99 camera is totally charges, acts dead, keep flashing Err CF, I try to format, it then says busy and gives me an Err 99. Please help! I'm lost w/o my camera!


Normally it can be an assortment of things:Dirty contacts between lens and mount causing a glitch in the communication.Use of outdated or obsolete chipsets on certain lenses \015\012Jam in the motorI/O error on the cf ca ... Canon EOS-20D Body only Digital Camera

CAPACITY Problem I am using a 2GB Kingston CF card on my S9500, and at 5MP it can store up to 1000 pictures. Recently I had it formatted on a computer and when I inserted it back to my camera, the capacity went down to 590 pictures! i thought it caught a virus or something so I scanned it, then formatted it on the camera. but the display still says I got 590 shots left. so I reformatted it on another PC, and on Properties it says 0 usage so i'm positive there's nothing wrong with the card. Now,


1. Connect your camera to the PC.\015\0122. Download the latest firmware\015\012 http://www.fujifilm.com/products/digital/downloa ... Fuji FinePix S9500 Zoom Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3564 seconds