Having problems with your Fuji FinePix 2650 Digital Camera ?

Zoom is not working It is frozen partway in and partway out i accidentally bumped the lens cap into the zoom when it was turning on now it wont work.


Answers :

Hi!
\015\012I dropped my fujifilm finepix 2650, and the zoom is out of its position,well being honest is totally out.
\015\012can anybody help me where can I find a diagram or something related to repair it, please?
\015\012I know something about electronic, that's why I'm requesting a diagram or whatever in order to fix it.
\015\012I really appreciate your help for this big trouble, by the way it's a good camera.
\015\012thank you.
Fixing a Lens Error on a Digital Camera
\012
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Fuji FinePix 2650 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Zoom is not working It is frozen partway in and partway out i accidentally bumped the lens cap into the zoom when it was turning on now it wont work.


Hi!\015\012I dropped my fujifilm finepix 2650, and the zoom is out of its position,well being honest is totally out.\015\012can anybody help me where can I find a diagram or something related to repair it, please?\015\012I know some ... Fuji FinePix 2650 Digital Camera

My batteries died in my pink i733 and when it shut down the "zoom lense" did not recede. i put fresh batteries in it but all that happens is that the green light flashes. it wont come on or turn off. the lense will not recede and none of the buttons work. the screen doesnt come on or anything. HELP!!!!! My i733 has the same problem,It died on me while I was taking pictures and now the lens is out the green light flashes and it wont turn on, new aa in it aren't helpin I get a very quick blee


This can sometimes be fixed if you remove the batteries over night and allow the camera to sit and discharge it should correct this problem. hope this helps. ... Polaroid i733LP Digital Camera

My camera's optical zoom isnt working. when i was on holiday little bits of sand got stuck in the zoom lens and now it wont come out and isnt allowing me to take pictures. the camera turns on, but comes up with a message saying "turn power off then on again."


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Sony Cyber-Shot DSC-S40 Digital Camera

Wont zoom everything works on the camera except for the zoom. when i try to zoom it says turn power off and on again. I tried this and nothing different happened


Hello!!! Try hard resetting once!!! Switch off ur camera ,\015\012remove the batteries and press the power button for few seconds. then\015\012put the batteries back and try powering on!! ... Sony Cyber-shot DSC-W80 Digital Camera

Zoom lens will not retract- camera turns on and off but nothing changes and it wont take pictures. When I turn it on the lens clicks but does not move. The camera keeps telling me to turn it on and off again but nothing different happens when I do. The battery is fully charged and it was working fine. Does it have a reset button? If so where?


Hi,This is a common Error. There is NO Reset Button. If under Warranty, send the Unit for Repair. Unless use the below techniques, if that could help.There is no point in Getting it Repaired by a tech it would cost you more than $100.If y ... Sony Cyber-shot DSC-W80 Digital Camera

Automatic zoom i have had my olympus fe-280 for a couple hours and it worked fine right off the bat.. then later i grabbed it to snap some shots and turned it on and it zoomed all the way in even through the red and it wont do anything else.. i have to take the battery out for it to shut off....?? any ideas??


Recharge battery after full charge install it what are changes ,does it works? If not clean battery teminals. ... Olympus FE-280 Digital Camera

Digital camera got dropped into the sand, and some sand worked its way into the lens and focusing system, and now the camera cannot zoom or focus, but still turns on and takes pictures i have a lumix dmc fx12, and it got dropped into the sand at the beach. the shutter wont close properly, there's sand in the lens, and it won't zoom. Please help!! i don't know how to fix it!!


THIS SOUNDS TERMINAL, BUT YOU MIGHT TRY USING CANNED AIR LIKE YOU USE TO BLOW DUST OUT OF YOUR COMPUTER, AND SEE IF IT HELPS ANY. MOST OF THESE CAMERAS ARE MADE WITH THE IDEA THAT THEY WILL NEVER BE TAKEN APART OR OPENED FOR CLEANING ETC. SO, THAT IS ... Digital Cameras

Zoom error the zoom on m camera wont close back in everytime i turn the camera on it makes a noise as if its tryn to shut over and over but it cant.I tried taking out the battery and reinserting a while late, didn work, any ideas?> help would be appreciated greatly :)


Worked on allot of fuji's. first detease, a gear is slipping in the lens retract assembly due to a crack or wear or jam2nd guest .. zoom errors means its really stuck tight the gears can be ordered and replaced and one more ... Fuji FinePix F460 Digital Camera

When i turn on the camera the lens wont pop open even when the battery is fully charged.... i was taking pictures and it working fine turn the camera off and on again then the lens wont open anymore? i can still view all the pictures i took from the camera but cannot take pictures anymore coz of the lens wont open. i tried initializing the camera by going to set up it didnt work..msg error said turn the camera off and on again and i did but didnt work either many times i tried please help thnks!


The problem is\015\0121- some dirt somehow got on the outside of the lense. After it was retracted fully in, it prevents the camera from opening again. When you turn it on, if it opens a little bit, try to pull it out NOT too hard and let go ... Sony Cyber-shot DSC-N2 Digital Camera

Zoom problem The camera I have don't allow the zoom to come out, when I turn camera on it says "zoom error" and then I can't do nothing on camera,not even look at pics I have taken. It does it alot, sometimes the camera will turn on without saying it,but it's very rare. And sometimes I can turn it on and it will say "zoom error" but if I press zoom in the camera will work. But it's very rare that it works. I love the camera and hope there is a solution.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Zoom DualCam 1300 (1599) Digital Camera

Stopped working the lens section of the camera got bumped and now the camera wont do anything but beep when i try to turn it on.


The Lens mechanism is broken - I guess you knew that.Casio support will adivse how much it will cost to repair.My guess? New camera will be almost as much- and uptodate ... Casio Exilim EX-S500 Digital Camera

Hi I have panasonic Lumix DMC-FZ20 and when I start camera on the display it come with message "plz turn camera off and then on again." But it dont really do anything when restart occurs. It keep showing same message. Although it allow me to see old pics when started with play mode but dont start if the message has already on display. Moreover, when this message is on it wont allow me to work with any of the camera function including zoom in/out. . . Many Thanks . . .


Usually when this message pops up it indicates the lens position is jammed, you will need a camera technician to assess the item for repair cost. ... Panasonic Lumix DMC-FZ20 Digital Camera

My batteries died in my pink i733 and when it shut down the "zoom lense" did not recede. i put fresh batteries in it but all that happens is that the green light flashes. it wont come on or turn off. the lense will not recede and none of the buttons work. the screen doesnt come on or anything. HELP!!!!!


The dead batteries affected on the camera ... Digital Cameras

I dropped my camera and now the zoom is stuck out and wont go in and it just says please turn the camera off and then on again but it still doesnt work


In this case it seems like the lens is dent and it will not gen inside, if you try to force it in it will be worst. . there is not really an easy way to fix it, you may need to send it to the manufacturer for repair. it will be from 40 up to 130 dol ... Panasonic Lumix DMC-FS3 Digital Camera

Power Over the last few weeks I have had issues with the batteries. I found that the "Eveready" brand certainly doesnt work (I am currently in India and it is hard to find anything here!) and I just went through 3 sets of Duracells but after a short period of time it tells me to change the batteries. I just changed them with new Duracells but when I turn the camera on it wont let me get past that initial little birdy which is the start up screen. I also just noticed that my zoom lens thinger is


Get Rechargable batteries with charger of good company and try it. Your problem is discharged/ outdated batteries. ... Canon PowerShot A510 Digital Camera

Lens Error I purchased a Nikon P90 a month ago; and it was working just fine. A couple of days ago during a photo shoot (after taking 190+ photos without any trouble), the camera went crazy.. It shows a lens error when turned on; asks to 'remove the lens cap' even if it is already removed. The lens starts to zoom out & in for a couple of times; then this error message comes up and just hangs. Tried removing the card, battery and even tried re-charging the cell. I purchased it from UK, and I'm n


This is probably THE most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Nikon COOLPIX P90 Digital Camera

Canon Power Shot S1IS 10x optical zoom 3.2 mega pixels: I turn the camera on and cannot view any subject images either through the viewfinder or LCD screen. The cap is off and the LCD screen and viewfinder are completely black. The display information works fine.


Hi,\015\012Your Canon S1IS camera has defect in CCD Sensor and Canon will repair it Free Of Cost. For details, please click ... Canon Digital Cameras

I dropped the camera this morning & now it wont turn on at all. I am just sick. Help! It fell on the top edge by the zoom button. When I picked it up, the side door (usb input etc.) was open. I tried to charge up the battery & that didnt work either. I called Lumix/Panasonic & they are helpless. They told me that I can send the camera in to be replaced for 175.00. I may as well just get a new camera.


... Panasonic Lumix DMC-TZ3 Digital Camera

My camera does not want to close the zoom lense. I have tried different batteries and nothing is working. It wont even turn on. The red light goes on for about 5 seconds and thats it. What can I do?


The lens are jammed. In this case you have to take it for professional repair. Don't try to repair it yourself as you can damage it beyond repair. ... Vivitar ViviCam 55 Digital Camera

Okay so my camera was in my bag with a bottle of hairspray. and it opend and sprayed my camera, now it wont work its a panasonic dmc-fp3 lumix its touch screen and i need to fix it when i turn it on it says system error (zoom) what do i do?


You will have to get the camera replaced, as cleaning it will probably lead to more damage. ... Digital Cameras

When I turn the camera on there is an exclamation mark and says zoom error The camera wont work at all


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Fuji FinePix J10 Digital Camera

DSC-HX5, Lens is Stuck in Zoom out mode. Turn On works but screen stays black. Automatically turns off after 10-20 seconds.


... Sony Cyber-Shot DSCHX5 Digital Camera

DSC-HX5, Lens is Stuck in Zoom out mode. Turn On works but screen stays black. Automatically turns off after 10-20 seconds.


... Sony Cyber-Shot DSCHX5 Digital Camera

Fujifilm finepix a820 zoom error ... i turn the camera on and it wont focus... message on lcd screen is zoom error. it will not take picture and when i turn it off agan the zoom bit wont go back inside


Hi,    This problem is related to the malfunctioning of zoom motor, Two possibilities are there,1- If company provides technical help on component leve in your regionl then zoom motor may replace.2- If component level supp ... Fuji FinePix A820 Digital Camera

My camera, a nikon d70s, wont turn on and work. ive taken the battery out and out it back in, still wont work. i then tried 2 charge the battery but still wont work. i then tried to re-set it but it still wont work.


If the camera does respond when you hold down the shutter release, then the internal clock battery may have drained. As the manual says on page 17, charge your main battery, put it in the camera, and leave it be for up to three days. ... Nikon D70s Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2758 seconds