Having problems with your Fuji FinePix A340 Digital Camera ?

I am getting an message that reads card no initialized. It is a new card. How do I initialize the card?

Answers :

Hi there
Take the write protect off by taking the card out\015\012of the camera, face the card towards you, look for a small white tab on\015\012the left hand side of the card, to unlock it push the tab down, it will\015\012be at the side of the card like this 59a6de4.jpg .
Also in the camera's menu you can format the card once the write protect lock is off.

Good luck and thanks for choosing FixYa!!
Repair Help & Product Troubleshooting for Fuji FinePix A340 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I am getting an message that reads card no initialized. It is a new card. How do I initialize the card?

Hi thereTake the write protect off by taking the card out\015\012of the camera, face the card towards you, look for a small white tab on\015\012the left hand side of the card, to unlock it push the tab down, it will\015\012be at the side of the ... Fuji FinePix A340 Digital Camera

I am getting a message that reads "card not initialized". It is a new XD picture card. How do I initialize the card?

To initialize the new XD card, you go into the camera's setup menu and navigate to the format function. Format the card and you might be ready to go. If your new card has an "M" or an "H" preceeding the XD, your camera will need a firmware upgrade be ... Fuji FinePix A340 Digital Camera

I took my CF card out to get photos, went to put it back in and the screen read "There is a problem with CF card. Replace the CF card." I didn't think there was a problem with the card. But I replaced it anyway. Same message. I tried to format the new card and a message read err 99 turn it off and on and reinstall battery & put it back. I did all of that. Same message about the CF card.

Your CF pins in the camera are most likely bent/broken. This is a very common problem. Most repair shops will charge $150-$200 to repair this.\015\012\015\012Hope this helps.\015\012\015\012Wes ... Canon Rebel XT / EOS 350D Digital Camera

Cannot format new memory card reads: systen file error. I have bought 3 new memory cards for my kodak easyshare 315. each time i insert the new card i get a message that reads system file error. camera has not been dropped or come in contact with water

Go into the menu and find "reset"...follow the on-screen instructions. ... Kodak EasyShare C315 Digital Camera

CF Card I have an error message when I install my CF card. The message reads that there is a error on the CF card. I have purchased two new Sandisk CF cards and get the same message.

Please post back the error message you notice. ... Canon EOS 400D / Rebel XTi Digital Camera

When I install a memory card in my camera I get the message read only memory card, remove write protection to capture or write to card. The switch on the memory card is in the correct position, this is a card that I have been using with no problems until now. I also installed a brand new memory card and got the same message. I think there's a problem internally with the camera.

... Kodak EasyShare Z740 Digital Camera

I have a fuji finepix A340 and I just got an Olympus xd M+2GB card for it, but I keep getting the "card not initialized" message on the screen. Reading the blogs, one person said to move the tab on the card. There is no tab on the card to move, at least not mine. Is this a compatable card? How do I get it to work?

"card not initialized" means you need to format the card in the camera before it will work. ... Fuji FinePix A340 Digital Camera

I bought a brand new sanyo e1292 camera and cant not get arround the error message of formatting the card, try different cards and size and still the same message. "Card requires formatting" this is a lie since my other digital cameras reads all the SD cards I tried with this camera. Any solutions? I think this is a firmware issue.

Are you saying that you have not tried formatting the card in the camera even though the camera wants you to? ... Digital Cameras

Just bought a new 2GB memory card for my Fuji A340. Keep getting message 'Card Not Initialized'. Tried to format card to no avail. Gone through all troubleshooting solutions, tried to call Fuji support (cannot get through despite holding for over an hour). Out of ideas what to do next. Please help. Many thanks. Sarah

Sounds a bit like my problem with my Olympus 2gb XD card. Finally finished up half way round the world for an answear;I suggest you see if there are worldwide options for info. Post your problem and see what happens, I finally got my solution from Eu ... Digital Cameras

Optio E10 When I turn my camera on I get an error message that says "memory card error", I purchased a new memory card but still get the same error message...any suggestions? I have the exact same problem with my Pentax Optio S7. I turn on the camera and it displays the message Memory Card Error. I have tried several new cards and get the same message. There is an option on the menu to format a card, but you can't access the menu if you have the card installed. It takes great pictures without t

HelloOK, if the memory card itself is locked, you might \012sometimes get this error code. All you need to do is to take out the \012memory card and switch the lever on the left side to the unlock. ... Pentax Optio S7 Digital Camera

I just inserted a 8 MB card in and the camera says "Memory card needs formatting" I click continue, then it says "Formatting will delete everything on the memory card", no problem, it's a new card so I click on continue then it says "formatting" then I get the message that says "Memory card cannot be read, insert another card" What's the matter?

8MB or 8GB? If it's actually an 8MB card, you'll be able to put maybe two or three pictures on it, so I'll assume it's an 8GB card.The DX4530 is designed to work with SD cards. Your 8GB card is actually an SDHC card. While SDHC cards will ... Kodak EasyShare DX4530 Digital Camera

Brand new Panasonic LumixDMC-TS1. When the camera is turned on, message reads "Memory card error Please check the card". We cannot get past this unless we remove the card and simply use the built in memory. Bad card or problem with the camera?

Have you tried formatting the card - either in the camera, or on a computer? ... Digital Cameras

I'm new to this pro camera world. After using a card reader (usb) with my laptop I put the card back in the camera and now I am getting this message on my screen, "Card not initialized". Why and did I do something wrong? It's a Fuji FinePix S2 Pro, please help I just starting using and hate that this has happened! Thanks, Kristie

Sounds like you didn't use the "safely remove hardware" function when you pulled out the card reader. If there are pictures on the card you want to save, use the card reader again and download them to your computer. Then, put the card in your camera ... Digital Cameras

Missing pictures I recently went on a trip and took some pictures that disappeared from my camera. Later I started getting the message 'Card cannot be read' so I purchased another memory card. I was taking pictures when I get the message 'Card cannot be read'. I turned it off and back on and the missing pictures were there. I then get the message 'Out of memory'. I turn the camera off and back on and the missing pictures are gone again. WHERE ARE THEY???

Hey flowernthe,\015\012 The error message “card cannot be read" means there was and error when the camera tried to access the memory card. To fix this you should make sure you are using the right kind of memory ... Nikon Coolpix 4600 Digital Camera

I turn the caera on and I get a message stating " Card not initialized" Can this be fixed or do I need to buy a new card.

It just means that the card needs to be formatted (or initialized) in the camera. This will erase it so download any pics from it first....use a card reader if necessary. Then, go into the camera menu and find "format" (may be called "initialize") an ... Fuji FinePix S7000 Digital Camera

I have a FinePix Fuji 4.0 mega pixels digital camera. I bought a new card, but I keep getting a message that the card has not been initialized. How do I do this?

You don't say which camera model it is.Probably an option to format it somewhere in the settings.Switch it to the mode where you view/erase pictures and look for it there.Sometimes you get option to erase1, erase all, format card. ... Digital Cameras

Hi, I got a new ProSpec 4gb flash card and used it last night in my canon 40d. I forgot to format before I initially used it. Shot lots of great images that I could see on the camera back, but now I am getting the messages - can not create a folder, tried to shoot another image and is says cf card is full, and now I can't review on camera, it says there are no images. Tried Digital Photo recovery software and got nothing. Anything at all I can do? I'm tempted to format now and then see if I can

I do not have a solution, but I do have same problem, or a variation of it: filled my ProSpec 2GB, removed it from my Canon G10 to insert a fresh card, then later reinserted the ProSpec to transfer photos to computer. Several tries, and no go. First ... Canon Digital Cameras

I am having the same problem with a brand new Fuji FinePix Digital Ca mera. I took about 1000 pictures looked at them on my computer and then when I was done and put the card back into the camera I got the card not initialized message and now all my pics have dissapeared and no one can get them back, Is there a problem with these cameras? Not very happy that I lost all my families Disney Vacation pictures!

Hi,\015\012\015\012I don't think the problem is on your firewire since it still charge your camera. I suspect your camera driver get fail. Please re move and reinstall the driver on your computer and get them paired again.\015\012\015\012 ... Fuji FinePix S5200 / S5600 Digital Camera

Card not initialized is the reading i'm getting when i put a new xd-picture card how do i fix this

You need to format the card in the camera. ... Fuji FinePix A340 Digital Camera

Memory card cannot be read... it is a Sanyo VPC-E760.. Get message saying card needs to be formatted. When I try that, I still get message that card cannot be read. What can i do to solve this?

Are you formatting the card in the camera as you're supposed to? ... Sanyo VPC-E760 Digital Camera

My M512mb olympus xd memory card will not work in my olympus syylus 760 all-weather camera. the message reads the card needs to be formatted and when i format it the message reads "card error" i have tried about 5 seperat M512 mb olympus xd memory cards and i get the same message with all the cards.

... Digital Cameras

Can't get new memory card to reformat - when I attempt to reformat, the message reads," Unable to format.

... HP Photosmart 733 Digital Camera

I took the CF card out of my Rebel XTi EOS camera to look at the pictures on my computer. When I put the CF card back in the camera I am getting the message "There is a problem with the CF card. Replace the CF card". I put a new CF card in the camera and am getting the same message. What do I do now? Thanks for your assistance.

This is an old posting but I'd like to comment that once the memory card is used in a computer it won't read in the camera again until you format the memory card. Make sure you have all your pictures on the computer before formatting the memory card. ... Canon EOS Rebel XSi Digital Camera

I have a Nikon coolpix 800. I just bought a card for it: It reads--Lexar Platinum II 4GB CompactFlash 200x When I insert the card, it bring me to a message saying" that the card needs to be formatted; I follow the buttons and press format; it starts to format, but the process is aborted and the window fades and out comes the previous window with the message that it needs to be formatted. Now: the Office Depot assurd me that it is the right card, it is a new card, the batteries are new

Hi,Nikon coolpix 800 hardware does not support 4GB memory card as it is too big memory for this model and its hardware is capable to support maximum 2GB memory card.Nothing is wrong with camera and memory card, they just don't match so bu ... Nikon Digital Cameras

I have an Olympus C-740 Ultra Zoom Digital Camera. I bought a new memory Card. This camera is new to me and this is the first memory card I have purchased. I do not have a manual for the camera. I am having a problem getting the camera to read the card. I insert the card, turn on camera & the window says "no picture". I changed the batteries also. I can get a oval ring which says "Info on the left, picture of cards at the top, "Mode Menu" on right, & bars at the bottom.It appears the "Mode Menu"

Choose YES for the Format option. Allow it to finish. Should work fine then.\015\012Possible defective card if does not work after full format. Do not use any "quick format" option.\015\012First time must be FULL format. ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3111 seconds