Having problems with your Fuji FinePix A340 Digital Camera ?

Initialize disc I am unable to initialize my XD card. I keep getting an error message. I have been to the set up menu and selected format...then pressed menu/ok. I continue to get the same error message.


Answers :

The solution offers requires you to have a non-M type memory card to install the new firm ware before you can use an M type card.
The whole reason for the problem is not having a non-M type card to begin with!
If you have version 1.00, then you will need to upgrade to 1.22 in order for this camera to read an xd type M or H picture card. I believe this is your problem. Go to this link on Fujifilms site for specific info: http://www.fujifilm.com/products/digital/download/a340/fupd.html
\015\012
\015\012Hope this helps!
Repair Help & Product Troubleshooting for Fuji FinePix A340 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Initialize disc I am unable to initialize my XD card. I keep getting an error message. I have been to the set up menu and selected format...then pressed menu/ok. I continue to get the same error message.


The solution offers requires you to have a non-M type memory card to install the new firm ware before you can use an M type card.The whole reason for the problem is not having a non-M type card to begin with! ... Fuji FinePix A340 Digital Camera

Error Message Hello! Every time I turn My Sony camera on it starts beeping and and giving me the error message "Turn the power off and on again." I've tried turning it off and back on, along with taking the battery out and putting it back in and even pressing the reset button and I'm still continuing to get the same error message. Any ideas on what I can try next?


I have the same problem ... Sony Cyber-Shot DSC-L1 Digital Camera

I have downloaded pics before to my MAC with no problems. I am now getting a "failure to initialize". I can see the pics in the window but the error message won't let me continue.


Your computer not initializing with your cam it is not big issue try to remove the device from control panel and start the computer then connect the cam that will let the computer look fro the device and install new one if the one you have is good it ... Canon PowerShot SX110 IS Digital Camera

Card error When I switch on the power I get a message to either switch off power or format the card. I press OK to format the card and then get a message of card error


If you get a message as "Memory Card Error" on your camera AND you still need some of the photos , the first step is to format the card through the camera menu (Note: if you have an sD card, once you re-format your card any photos cannot be recovere ... Olympus SP-700 Digital Camera

Get message that memory card needs to be formatted (I have 2 cards - 16MB and 2GB).After I press OK, I get the message "Card Error" Same message on both cards.


Hello Dear\015\012\015\012Insert your memory card into your computer's reader if you have one. If \015\012not, you can purchase a multi-format USB Memory Card reader from \015\012Amazon.com or Buy.com\015 ... Olympus Camedia C-350 Digital Camera

Error Message When I take a photo with Nikon D60 it's as though the shutter gets stuck and it gives an error message on the screen (Error! Press shutter release button again.) The top half of the photos are completely black. Also, there have been a couple of times during this problem that the shutter clicks and when looking through the viewfinder everything appears tinted. Weird, I know! Any ideas or suggestions?


Try to take off the battery and reset the camera. You can also try to remove the lens and check the mirror opening..see if there is some thing stuck there. You can try to click the shutter while the lens is removed. If this procedure didn't work I su ... Nikon D60 Digital Camera with 18-55mm lens

Error message I continue to get error messages on my kodak c643 6.1 mega pixel camera. I hate to dump the camera because it's been such a great camera. I just took it out of my purse to take a pic and it did not open up for me. It would power up for a couple of seconds and then go off. I've had the camera for 2 years.


Submit your error code in this web page\015\012\015\012http://www.digitalcamerainfo.com/error.php\015\012\015\012"Was this helpful?" ... Kodak EasyShare C643 Digital Camera

I have a d 80 nikon and encounter following problem. when i press the shutter-release button i am getting following message error 07. I then pressed again the shutter release button. The same error occurs. Can you solve this problem ?Please advise


I dont think this is actually an error but,the "07 is just telling you that the camera is\015\012in Raw shooting mode and in that mode you can shoot 7 shots one after\015\012the other (with continuous shooting mode on) before the buffer gets\0 ... Nikon D80 Digital Camera with 18-135mm Lens

Lumix DMC-ZR1 When I turn the camera on, I get a message telling me to turn it off and turn it on again. It does not focus, and the EZ zoom shows all the time whether I press the button or not. I also get a "system error ( focus) " message.


This is a lens mechanism fault. USe can of air and spray on surrounding the lens For cleaning the dust. and then try. ... Panasonic Lumix DMC-FZ28 Digital Camera

Sony cyber-shot DSC-W210. On/off button does not work, but I can turn it on using the play button. Press the play button again to get to picture taking mode, but it will not take pictures. Then I get the E:91:01 error message that so many people seem to be talking about. I can remove this message by 'initialising' through the menu, but can't take pictures. I've also tried removing the battery, leaving for a while, then replacing, but to no avail. People seem to think this is a software prob


... Digital Cameras

I'm trying to upload pics from my Z8612 IS digital Kodak camera and am continually getting the following message: "Camera is in use Please try again later" Not sure what I'm doing wrong. Camera is connected to my computer and icon shows up but when I go to get pics is when the error message shows p


Use a card reader to download your pictures to a folder you create on your desktop. ... Kodak Easyshare Z8612 IS Digital Camera

I have a Kodak EasyShare CX6330 and I bought a new 4GB SD card today. WHen I put it in and turn on the camera it says "memory card requires formatting" I press Continue and it tells me everything will be deleted...I press Continue and then it says it's formatting only it takes me right back to the initial "memory card requires formatting" screen. It just goes in a circle and it won't let me go to the menu when I hit MENU. How do I get it formatted?


Kodak CX6330 camera support KODAK SD Cards up to 2 GB and KODAK SDHC Cards up to 8 GB.Other manufacturer cards should be up to 2GB because of camera hardware read/write speed.So if new 4GB card is other then above mentioned Kodak cards, t ... Kodak EasyShare C330 Digital Camera

My camera worked fine but now I get an error message to press shutter release again. When I press it again the message remains. Nothing is working now.


Try the reset button with camers ON. Next, with camera On, remove batteris, wait a minute and replace. If there is a camera hardware rest button, give that a try. If that all fails, then exam by authorized Nikon Service Center is in order. ... Nikon D40x Digital Camera

I have a D80 since 2 years and since last 1 week have been getting the 'Err' message. Initially, after referring to the manual & pressing the shutter release button, the camera responded only ONCE. i.e. the 'Err' message disappeared and the pics were SEEN on the screen (which means the shutter was working). Now, even that has stopped. I'm not able to click any pictures (although the mirror moves) and certain specific menus & other buttons on the body dont work. Now on pressing the shutter re


Hi sandeepbhat2, On page 129 of the D80 manual is the factory reset switch. Look on the left side of the camera there is the terminal cover, inside below the USB connector is a small reset button. Give that a try. If still it does not work you should ... Nikon D80 Digital Camera with 18-135mm Lens

Lens error message, bells, and lens goes in and out and stops out. Remove and replace battery and press play and get picture, press camera and lens goes out and LCD works for a few seconds and then goes dark. No way to retract lens except remove battery and reinstall and press play then battery out.


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Casio Exilim EX-S500 Digital Camera

Hi, I have a month old Cannon A3100 IS Powershot camera, suddenly over the weekend when passing the camera to another person totake a shot, the message "Lens Error, will shut down automatically" came on allowing me to do nothing. The lens initially would not retract, however without forcing it eventually it did so, but when switched on I still get the same message


Same happened with me ... Canon PowerShot A3100 IS Digital Camera

I am trying to upload a JVC Everio video recording on to Youtube following the simple, user-friendly instructions which are themselves on Youtube at YouTube - JVC Everio Tutorial: One Touch Upload to YouTube (http://www.youtube.com/watch?v=w_EWZckPY_s) However, having dragged and dropped my selected files into the "SELECTED CANDIDATES" window - as instructed - I clicked on the NEXT button and get the error message "CANNOT CONNECT TO THE NETWORK", even though my internet access is working p


Its a bug. You need to update the one touch upload app on your everio to the latest version. Follow the link below to know how ... JVC Digital Cameras

My lens on my Canon IXUS 105 is stuck open and when I push the on/off button I get an error message which says: Lens Error Will shut down automatically Restart camera I can't view pictures, I can't press any of the buttons... I'm not sure where the restart button is. It's a very new camera, I only got it 2 weeks ago. Please help!


Hi,This is a common problem on this set. The lens error is common for cameras with telescoping lenses.\015\012\015\012You can help the motor by connecting the AV cable --- this keeps the LCD off and not d ... Canon PowerShot SD1300 IS IXUS 105 Digital Camera

Purchased 8 gb microSDHC Card with adapter for my cannon SD500 & WHILE TRYING TO FORMAT memory card GET AN ERROR saying card locked. I've moved the slide tab to the UP position but continue to get card locked message - help.


The SD500 uses SD cards (and by extension, microSD cards). SDHC and microSDHC cards are electronically incompatible. While SDHC cards and microSDHC adapters will fit into the slot, they will not work in SD devices. This is a hardware issue and cannot ... Digital Cameras

Zoom Error My camera will no longer turn on. When I press the power button, I get a few flashing lights, and then after a while a "Zoom Error" message appears and the camera starts beeping. I have replaced the batteries to no effect.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Olympus Camedia C-5500/C-55 Sports Zoom Digital Camera

My Canon Powershot A560 memory card is locked and it is the camera doing it not the memory stick.And there is nothing in the manual about how to fix it. When I turn on my camera I get an error message"memory card error" then when i press to view pictures it says the memory card is locked and turns itself off. I have had this camera for some time and have never had issues uploading pictures onto my computer or with the memory card.I really would rather not lose the pictures that are on the camer


Remove the memory card from the camera. Note that there is a small slide switch on one of the long edges of the card. Slide the switch to unlock or lock the card. ... Canon PowerShot SD750 / IXUS 75 Digital Camera

Using Sony CD-Rs I continue to get Disc Error messages after a few pictures, and then the pictures already taken are no longer available for download. Loosing many photos this way. Put in a new disc and it works for a while only to do this again. Had some previous problems similar to this with Memorex CD-RWs but it is getting worse and worse. Is this a repairable defect? This is a fairly new camera. Wish I had a memory stick instead of the CD memory!!


It sounds optical lens is dirty and requires cleaning, if cleaning does not help or improve camera performance then optical block will be replaced that is bit expensive. Hope this camera would be under warranty so ask warranty cover from Sony or Stor ... Sony Mavica MVC-CD500 Digital Camera

I have a Minolta Dimage 7Hi and get a 'card error' message when I turn it on, in the middle of the viewing screen. The camera acts like it takes a picture without the button being pressed, then the red light next to the card goes on and off for about 10 seconds. Then the camera shuts down. It repeats this when I turn the camera back on and doesn't respond to any other settings or button pressings. Can you help?


Format CF memory card to FAT16 - 7hi does not recognize FAT32 nor NTFS ... Konica Minolta DiMAGE 7Hi Digital Camera

My Canon Powershot A560 memory card is locked and it is the camera doing it not the memory stick. When I turn on my camera I get an error message"memory card error" then when i press to view pictures it says the memory card is locked. i have switched the lock switch on the card, and it doesn't do anything, i have also tried formatting my card.


1 Turn the Canon Powershot A560 over so the bottom is facing up. 2 Locate the door on the bottom of the camera. The door is labeled "CARD/BATT. OPEN." 3 Place your thumb on the sl ... Canon PowerShot SD750 / IXUS 75 Digital Camera

Why doesn't initializing my E:91:01 error message make it disappear? It just continues to flash no matter how many times I try initializing it.


Hi,Error code E:91:01 shows problem with Flash Unit circuit that flash is not being charged for some reason.Replace Flash Unit in camera, perform Initialize once again to get ride of this error display in camera lcd.Let me know if y ... Sony Cyber-Shot DSC-S40 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3060 seconds