Having problems with your Fuji FinePix A360 Digital Camera ?

Have just brought a 2GB memory card but i keep getting a card error message.I have tried to format but with no success.Is the memory caard size to big for the camera as the last size was only 64MB?


Answers :

Hello

OK, if the memory card itself is locked, you might \012sometimes get this error code. All you need to do is to take out the \012memory card and switch the lever on the left side to the unlock.

6c99e31.jpg

If\012 the error is still displayed after you did the above, you might want to\012 try the card in another camera.

If\012 the card works in another camera . the problem is with your card reader\012 in your camera.

If you open you sd slot and look inside with a \012sharp light , you should be able to see on the left side of the slot \012there is a little copper or spring steel lever switch. This switch work \012as follows:

1. When no card is inserted / no write protection ,\012 the switch is open and thus the protection is off.
2. When locked\012 card is inserted , the tab is depressed and tells the camera that the \012card is lock.

Contrary to popular belief ,the little tab on the \012sd card is not an electronic switch and does not physically influence \012the card operation itself. If you put a locked card into a camera \012without a sd lock switch , you would still be able to use the card \012normally.

It is incredible difficult to fix this switch because \012of space limitations in the sd card. Look into the sd slot and if you \012can see the switch , use a needle to pull the little tab down toward the\012 base of the camera by about 2mm or until it works being careful not to \012bend it.

If this does not resolve your problem , there might be a\012 short in the switch circuit and the camera will need to be disassembled\012 to resolve this error. This should cost no more than $50.

Please\012 feel free to contact me if you need further information

Kind \012regards
Andrea
Repair Help & Product Troubleshooting for Fuji FinePix A360 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Have just brought a 2GB memory card but i keep getting a card error message.I have tried to format but with no success.Is the memory caard size to big for the camera as the last size was only 64MB?


HelloOK, if the memory card itself is locked, you might \012sometimes get this error code. All you need to do is to take out the \012memory card and switch the lever on the left side to the unlock. ... Fuji FinePix A360 Digital Camera

I have a canon pc 1043 (Power Shot A 70) digi cam. i have a problem with this cam.It memory card is 128 mb. and when i switch on my cam it show memory card error.what can i do. I show it many local shop but no it show memory error.what can i do for it memory card it size is to big i can't connect it with my pc. please give a solution.


HelloOK, if the memory card itself is locked, you might \012sometimes get this error code. All you need to do is to take out the \012memory card and switch the lever on the left side to the unlock. ... Canon PowerShot A70 Digital Camera

Canon ZR200 memory card say ''card error'' when inserted. Card is not locked. I have formatted it. Have used 3 different sizes of cards. Sometimes it will say ''card error'' then start working a couple of days later as if nothing was wrong. Last card used worked for 13 pics then started ''card error'' next time I turned it on. Currently it just says ''card error'' all the time.


Sounds like the contacts for the cards are dirty. Turn off the camera and remove the batteries before doing the following.\015\012\015\012Try taking a piece of card stock (or a manilla folder) and cut it to the size (width only) of your ... Digital Cameras

What size sd memory card do i need as the sd card i have at the moment is too big


... Vtech Kidizoom Digital Camera

When I insert my memory card into my printer, all that pops up is "Memory Card Error." I really want to get my pictures off of the memomry card and into my computer, so this is getting pretty frustrating. I was going to reformat the card in the camera, but that will apparently erase all the pictures from the card. I had taken this memory card to Walgreens last summer and gotten pictures off of it, so I don't understand why it won't work now. It's a 4GB Kodak memory card... If you could h


Make sure that the card is not locked, there might be a little tab on the side of it that slides up and down. \015\012If doesn't work, it probably needs to be reformatted once you get all your pictures off of it. \015\012(you will lose everything)\01 ... Digital Cameras

Memory card hello my cam is Benq DC3400 .Itry to put memory card SD 2GB but the cam can't able to formate it .someone tell me that i have to buy a small size like 16 -32MB card. there is any soluation becuse this size of cards not avaliable right now. or is there is any softwear can solve this problem thank you


Hi,\015\012\015\012You can use normal SD cards up to 1 GB in size. ... BenQ DC3400 Digital Camera

I have a Kodak easyshare Z740 camera.....looking to get another memory card....how big can I get? I bought an 8 gig kodak memory card at CVS and the camera did not recognize the card to initially format it? not sure what to try next, i returned the 8 gig card thinking it was too big for that model camera. ideas?


I believe that your Kodak Z 740 is designed to use the 2 GB SD/MMC cards, only.. ... Kodak EasyShare Z740 Digital Camera

I have just bought a new memory card for my Olympus D 390 camera, when i put the card in the camera it goes to a screen saying card set up, then gives the options of power off or Foemat. When i choose format it askes , format yes or no, if i choose yes it then says card error, if i choose the no option it goes back to the maun set up screen again.the memory card that i am trying to put in is a 1 gig memory card, is that to big or do i have to get an upgrade from somewhere to allow the camera to


You need at least a 4 gb for it to read.. i just did mine too.. they are on sale right now at Target for $ 14.99, try this and let me know if this helped you good luk. tiffany in chattanooga tennessee ... Olympus Camedia D-390 Digital Camera

Hi. Last time I went to used my camera the screen showed a message saying the memory card was damaged. When I tok it out I saw that it was slightly damaged on the bottom strip. I have replaced it with another memory card but the same message keeps coming up so I cannot take any photos.The message says: "This memory card cannot be used. Card may be damaged. Insert another card." Any suggestions how I can reset the camera before I pay to put it in for a service?


It is possible that there are bits of the damaged pieces struck inside the card reader contacts in the camera.\012So if you can remove the battery and memory card and tap upside down ,you might be able to retrieve the broken pieces.\012us ... Nikon D40x Digital Camera

Memory card I love my Gateway DC-T50 but the card fills up too quickly.I have a Kodak SD 256 MB memory card and want to get a bigger one.So I went and got a 2 GB and installed it , the camera screen said This card cannot be used. I took it back to the store and the clerk said it was probably too big because I have an older camera. So I exchanged it for a 1GB and it shows the same error message. My question is; what is the biggest memory card this camera can use? I have misplaced my manual, or I


Try a 512mb because your camera could be older then the 1 and 2gb memory cards can handle...or depending on where you are..you could take it to Best buy and they could tell you...hope it helped =) ... Gateway DC-T50 Digital Camera

When I put the memory card in the camera it says 'cannot read' it. How do I format the card? I know it has the right 'size' memory. The memory card I am using is the same one I used a few months ago and I saved the pictures I took to a computer and erased the pictures off the card. Now as soon as I turn the camera on it says 'This card cannot be read'. Im frustrated as there is nothing in the manual that seems to get my camera working again. I have only had it for a year. Please HELP!


Do not use the computer to erase the card. This is the reason your camera no longer recognizes the card. Now you need to format the card in the camera to get it to work properly. ... Digital Cameras

I have a 26-IN-1 USB 2.0 Memory Card Reader device from DZ Tech (DigiZone Technology) I asked if there is a instruction manual for supported format applications CF ll, Microdrive, CompactFlash 1, Memory Stick Duo, Memory Stick Pro, TransFlash, Mini SD, MultiMediaCard, MultiMediaCard Mobile, MultiMediaCard Reduced Size, Secure Digital, SD, xD Picture Card? DZ Tech said, "No, there is no instruction for it, but it's same way as you use the sd card (micro sd card to the sd adapter will transfe


Look....what's so difficult about plugging a card into a card reader and then the USB into your computer? There's no instruction manual because that's all there is to it....why waste paper to explain that? ... Digital Cameras

Recieved as x-mas gift last year and since last year same problems . problems: says memory card full even if the chip is emty it still says memory card full.


Get new mem card or delete photos. ... Samsung S760 Digital Camera

Brand new vivitar 5018 keeps showing insert memory card but when card inserted it reads card not ready and flashed between 2 screens...please help. I have tried 2 memory cards, one 64MB SD card and one 4GB SDHC card both also new...


Vivitar cameras are known for there inability to function normaly. Alot of these and many more problems I have encountered are manufacturer problems and can not be fixed on your own. the best thing to do would be to contact Vivitar and see if they ca ... Vivitar ViviCam 8025 Digital Camera

Do I use the orange or the black adapter card to insert a memory card into my olympus stylus 840 camera? I bought the camera last night. The lady also said I'd need a PNY 2GB microsd memory card. Well I've tried inserting the tiny black card into the larger black card AND the orange card and neither one seem to fit in the camera. Am I inserting wrong or is it just not compatible??


Try inserting it without either adapter card. ... Olympus Stylus 840 Digital Camera

Memory card I obviously have left the memory card somewhere when processing film. What size memory card do I need for this camera.


Hiis this the type you had before in the camera sd cards Your digital camera Polaroid A300 uses S ... Polaroid a300 Digital Camera

Memory card Hi, I bought a larger memory card for my Umax Astrapix 530 camera. I put it in and turned on the camera and it just freezes. I guessed that I needed to formatt it, but the buttons on the camera wont work with new card in. Once I put the old card in which is 64mb it works fine, but the new card is 2GB. What's wrong and how can I use it please?Thanks


Hello\015\012\015\012Insert your memory card into your computer's reader if you have one. If \015\012not, you can purchase a multi-format USB Memory Card reader from \015\012Amazon.com or Buy.com\015\012 ... Umax AstraPix 530 Digital Camera

I have a 256MB compactflash memory card for the coolpix 4300 that was bought over 7 years ago. I went to Radio Shack and Walmart looking for another. The salesperson told me that the SandDisk 8GB compactflash memory card would work. I tried it and it doesn't. The screen on the camera reads do you want to format the card. I selected yes, but it doesn't work. Is there anyway I could make the card work. It's the same size and look as the 256MB card.


According your camera specs listed on dpreview.com:\015\012http://www.dpreview.com/reviews/specs/Nikon/nikon_cp4300.asp\015\012 ... Nikon Coolpix 4300 Digital Camera

Memory card size


I think those photos save in your camera built in memory. took the card out and turn on the camera . NOw press the play button and see the photos appeared in screen or not. If yes then you have to make the default storage location as your memory card ... Nikon Coolpix 2000 Digital Camera

I have a Canon PowerShot A520. The memory card is a MMC-16M. I bought a 4gig card and get a "Memory Card Error" message. What size SD card can I use?


On the canon website it gives a table showing the number of images that can be stored on various media. \015\012The Table only goes up to a 512mb card. Here is the link:\015\012 ... Canon Digital Cameras

I REMOVED BOTH MEMORY CARDS FROM CAMERA. TOOK THEM TO WAL-MART AND MADE A DISC FROM THE CARDS. CAME HOME AND PUT THEM BACK. RED LIGHT FLASHING AND CAARD ERROR. SHOWED UP. REPLACED BOTH MEMORY CARDS STILL SAYS CARD ERROR.


Hi.Remove the batteries for one minute and insert the cards with battery out, then restart the camera.Test the camera with only one card.Ensure that the Compact Flash, Microdrive or xD-Picture Card you are using are inserted ... Olympus EVOLT E-500 Digital Camera

Memory card olympus C450 zoom. what is the maximum size of memory card for this camera ? I purchased a 1Gb M xd card which has read " card error". many thanks. mike


Hi!\015\012\015\012\015\012\015\012\015\012\015\012Maximum memory size for your camera is 256MB (according to the manual). ... Olympus Camedia C-350 Digital Camera

Canon ixy 700 works fine with SD memory card 512KB. Purchased a new 16GB card but when I get a "Memory Card Error". I figure it's a firmware issue that isn't handling cards of this size. I have been on the website http://web.canon.jp/imaging/ixus700/frm-e.html#serial but it says my canon is currently running at the latest firmware (not sure what that is or how to find out). Happy to pay for a fix but I don't want to pay much for an answer which says 'you're stuffed, this can't be


HelloOK unfortunately your camera only supports a memory card up to 2GB. Fortunately there is a firmware update which might resolve the problem, however, this is not legit firmware supplied by Canon, hence, the full effect of the upgrade ... Canon PowerShot SD500 / IXUS 700 Digital Camera

I normally use a small 32mb memory card in the olympus D-390 but used an olympus fe-130 over the holidays with a 256mb memory card. I do not have the usb cord for the fe-130 so I put the 256mb card in the d-390 camera and plugged it into my computer to load up my photos but I get a blue screen on the camera with options of Power off or format. Is the card too big for the camera? it works fine in the other to let me take photos and view them, if I had the cord for it or went to a store to print


Many cameras will not read cards written on other, different cameras. There should be no problem taking the card to a store and having the pics printed or put on a disc. Or get a cord for the 390, or a card reader for your computer. ... Olympus Camedia D-390 Digital Camera

Memory Card I inserted my PNY optima SDHC (60HD) 4GB memory card...Says requires formatting...I click continue...says will delete everything...I click continue..says formatting...runs...then goes back to the beginning & says requires formatting. This is a brand new card, just purchased last weekend, I have never had to format a card before. ANY HELP WILL BE GREATLY APPRECIATED. My camera is a Kodak EasyShare C643. THANKS!!!!!!


Hi...The way to format is just follow this, you just plug you camera to the computer then turn it on, after that, the camera will detected, you open my computer, you can see the removable disk, just right click then format then check quic ... Kodak EasyShare C875 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1542 seconds