Having problems with your Fuji FinePix A850 Digital Camera ?

I have a fujifilm A850 camera....... i just put in new batteries.... When i push the on/off button all it does is make a clicking sound..... Please hepl!!!!!

Answers :

Sounds like a lens problem. Try these:\012Fixing a Lens Error on a Digital Camera
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Normal batteries it's not working for me!
After i replace standard alkalines with rechargeable NiMH batteries Sony and Varta 2700 Ni-MH it's was working!
My camera it's turn on every time!
Repair Help & Product Troubleshooting for Fuji FinePix A850 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a fujifilm A850 camera....... i just put in new batteries.... When i push the on/off button all it does is make a clicking sound..... Please hepl!!!!!

Sounds like a lens problem. Try these:\012Fixing a Lens Error on a Digital Camera\012\012This has to be THE mo ... Fuji FinePix A850 Digital Camera

PLEASE HELP! We have a sony cybershot (dsc-s40) and when I turned it on today the screen was bright white. It still makes all the sounds when I push buttons, but the screen does not change. I down;oaded pics off the memory card, but the screen still does not change. Please help?

There is a problem inside the camera with the wire harness/cable connection to the screen. They are know to come loose over time. If you tap rather briskly on the front of the camera right on the word Cybershot it should reconnect it. Worked on min ... Sony Cybershot S650 Digital Camera

PLEASE HELP! We have a sony cybershot (dsc-s40) and when I turned it on today the screen was bright white. It still makes all the sounds when I push buttons, but the screen does not change. I down;oaded pics off the memory card, but the screen still does not change. Please help? I am having the same exact problem.. Did anyone figure out how to fix this???

It sounds like the lcd is broken or loose. The backlight is still working properly, which is why you only see white. You could try to open the camera and push in the ribbon for the lcd, or bring it to someone who knows what they are doing. HOWEVER ... Casio Exilim EX-Z57 Digital Camera

The lens will not go in or out and makes a clicking sound when the power button is pushed.

Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK bu ... Casio Exilim EX- Z200 Digital Camera


Error 05 is not uncommon with the Canon Digital Rebel XT camera.On front on the right hand side under the flash there is a small prong \015\012which is connected to a switch that monitors if the flash is\015\012 released. This switch ofte ... Canon Rebel XT / EOS 350D Digital Camera

Camara just "froze" last time using it. After charging the battery, push power button, camara won't turn on. Makes a little sound when you push the power button, then just does nothing. My lens won't retract back in either. Had camara for almost 2 yrs.

Unfortunetly , your camera is broken and needs replacing. ... Samsung L100 Digital Camera

My Kodak Easyshare M7623 Digital camera will not come on. It is completely charged and the lens is out. When i push the ON/OFF button the screen comes on and quickly goes of. The lens remains out the entire time. It also makes a clicking noise when on on/off button is pushed.

Here are the steps:1. Make sure you will install a new or fully charged battery/batteries into your camera.2. Clean the battery contacts.a. Remove the battery/batteries and the memory card from your camera, then wi ... Kodak EASYSHARE M763 Digital Camera

In auto mode, the button is pushed, clicking sound

... Nikon D40x Digital Camera

The battery ran out and I was not able to recharge for a couple of days .The camera never shut down the lens still stayed out of camera body even when the battery was taken out. After recharging battery and reinserting it in the camera the camera will not function. When the power button is pushed the light goes on and the camera makes attempts to close lens but then it buzzes and makes beeping sounds and then goes off.

Hi,Unfortunately, this is a common problem on this model. Yet, no resolution other than getting it repaired.There are a number of things you can try:1. Ensure batteries are fully charged2. Look ca ... Olympus FE-200 Digital Camera

The mirror is halfway up, and will not move when you actuate the shutter, for my Pentax MZ-30. Any button I push or switch I move, makes the camera make a whinning sound and nothing happens.

Try to remove the battery with the camera in "OFF" then reinstall the battery (make sure the camera is off) and set your top right dial to the "P" (Pict position). Make sure the switch to the lower right front of the lens mount is set in AF. The n po ... Digital Cameras

I have 2 pentax optio m20 cameras purchased at the same time. Both have developed the same problem: hit the on button and it tries to come on, but makes a funny sound, lens moves in and out trying to focus (screen is lit showing focus changing and green mode icon), then the camera shuts off and never gets into picture taking mode. I fixed one of the cameras once by pushing buttons after connecting and disconnecting from the computer (and the camera worked okay for several months), but repeate

Your previous diagnostic definitely\015\012 indicates a mechanical problem, once the possibility that a false \015\012sensor signal to the main board as the cause by resetting all functions.\015\012 It is very likely that ther ... Pentax Optio M20 Digital Camera

I have a canon ixus 860 IS and i it was functioning well until about 2 days ago when suddenly there is a sound upon starting/turning it on that doesn't seem to sound as smoothly as before. and just yesterday, it started getting really blurry shots even as i half click the button. please help

Hi,it's look that is yourfocus motor or\015\012the ccd are defective it is always the same problem whit this kind of camera.\015\012you will to fix the lens and ccd\015\012hope it is not the ccd....\015\012have a nice days ... Canon IXUS 860 IS Digital Camera

Last time I tried to turn on my camera (Samsung SL502) the lens came out but the screen didn't come on. I hit the power button again and nothing happened, now the lens is extended and won't go back in...pressing the power button does nothing but the camera makes a funny sound. Please help. Camera is 6 months old.

Sounds like the lens mechanism is stuck - mine does the same thing after my 2 year old dropped it on the cement. Looking for a replacement lens now, but not having much luck. Read the previous posts for other solutions. Good luck! ... Samsung SL502 Digital Camera

Camera won't power up even with new batteries.When I push the power button the small light on the left side of the ZOOM W/T button lights up briefly and the camera makes a beeping sound three times.

That error can only be caused by dead batteries or stuck/sand in the lens mechanism. So most likely you are having a lens issue. Here is a link that may help you in troubleshooting. If problem persists you should consider repair/replacement: ... Samsung Digimax D53 Digital Camera

HP CB350 Digital Camera was on and went off with the lens still out. and i did try switching it on again and nothing. its making a clicking sound if i do try switching it on. fully charged batteries a

Try the procedure in this tip. ... HP CB350 Digital Camera

Hello I have a coolpix s710. When I push the top left button to turn on camera, "lens Error" appears. The camera makes a humming sound and the lens doesnt open

Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Nikon COOLPIX L3 Digital Camera

My camera an olympus stylus 700 all-weather 7.1 megapixel, isn't turning on. When the on button is pressed the zoom comes out/in/out making a grinding sound, the screen shows a none focused image until a bright blue screen is displayed with D: 5eO2 showing.....please help.

Did you happen to drop it in sand or on a hard surface. by the description of the problem it shows that the movement of the lense assembly is not proper.i.e. it is having friction in the movement.Needs to get it repaired. ... Digital Cameras

Nikon coolpix s210: when i push the "on" button the lens opens, readjusts several times and makes a beeping sound, then the screen shows a lens error.

The lens motor that drives the lens too & froth must be changed to get it working properly again, u need to go to the local service center, the will help you out. u can give me your location & i can help u with the nearest service center. ... Nikon Coolpix S210 Digital Camera

Clicking sound when ON button is pushed / Lens will not retract. Where can I send it for repair ??

Remove the batteries from the camera, wait a few minutes. Put a fresh set of \015\012batteries back in (pand turn the \015\012camera on. If that didn't work, try pressing and holding the Function or OK \015\012button while turning the camera on. \015 ... Casio Exilim EX-S500 Digital Camera

My camera isn't working. I turn it on and the vision is blurry. They is makes a buzzing sound and turns off. I shook it and can hear rattling. It wasn't dropped or in any contact with water. Also when I hold down the focus button, the camera gets stuck and the screen will freeze. Please help.

It sounds like there is a problem with the lens and it needs a repair.\015\012\015\012An Out of Warranty repair for this model for this fault is about 48 pounds + shipping. KODAK also offers a Trade up option where you will have the oppor ... Kodak EasyShare M1033 Digital Camera

Got Camera from Amazon more than a month ago. I believe the focus is acting up. I turn it on/off, or focus it pushing the button half way and it makes this disturbing sound as if a DVC tape is struggling to rewind. Screen & Shots are blurry. I zoom in half way, it's almost clear but not quite. Its not saying Lens Error (yet)

Definitely sounds like you have a problem. You should try and see if it can be repaired under warranty. ... Canon PowerShot SD1100 IS Digital Camera

Sony Cyber-shot DSC-H10 No flash happening for me and when I push the flash button I get a yellow caution with the exclaimation mark stating that "flash setting cannot be changed" and when I do take a picture I can hear clicking going on in the camera which I assume is the flash. I have manually lifted the flash and there is still not a flash going on. Please help....Donna

Certain camera settings can not use the flash. You need to change the camera to another setting and turn the flash on. ... Digital Cameras

Power on Hi! My name is Sam, i bought a casio Exilim Ex-Z50 3 years ago. For some reason, whenever i push the on/ off button on the camera, it makes a bip, bip sound, the screen stays black, and the zoom does not come out. The battery is fully charged because i got the measure out from my volt-meter. Can i have an advice on what's to do to get my camera fixed.

Try the procedures in this tip. ... Casio Exilim EX-Z50 Digital Camera

HELP! Ok, tomorrow I leave for a trip to New York. I have been reading these questions and I have found that the camera has the same problems across the board. My LCD goes white...nothing is displayed, not even the playback image. It makes sounds like it is working, but it is not. I can't find the reset button anywhere. I have looked in the memory card area and the battery, but I can't find it. Please, if you can help, I need it by tomorrow.

As I understand, the flex connector to the LCD screen is rubbing against a support rib on the inside of the camera and causing it to short. This is a design flaw of the camera. For a quick temp fix, GENTLY press on the lower right corner of the LCD s ... Sony Cyber-Shot DSC-S40 Digital Camera

The button you push on my camer to take the pic is not clicking to take the pic, it doesnt engage with anything to make a connection.....what can I do?...

... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1809 seconds