Having problems with your Fuji FinePix E510 Digital Camera ?

Down loaded pictures, now when power up the lense doesn't open, screen is lit


Answers :

Hi,
\015\012
\015\012SOLUTION 1:

One possible reason for this error is if the camera is switched on and the lens unit is prevented from extending. The camera will struggle for a second to extend the lens, then report the problem. Inspect the lens for any obvious obstruction, then turn the camera off, then on again. Usually, simply switching the camera Off then On again is enough to correct this problem.

SOLUTION 2:

Remove and recharge the battery. If the error does not clear up right away, leave the battery out of the camera overnight, and try again the next day.THis should most probably solve your issue

SOLUTION 3:

Most of these kinds of errors come as a result of some kind of impact, sand or dirt exposure, possible water damage, or some other problem with the lens.
There is a possibility that the lens is off track.
Try pulling or pushing (not too hard either way) and see if it may be off track and return it to the correct setting.Since it is not working anyway, try the above a few times and then test the camera to work right. I have fixed more than one with similar (off track problems) and they worked good after wards.
Worth a try

SOLUTION 4:

There are chance of getting this error. when the temperature is vey les..Try operating the device in a hot environment and see whether it works...

If you still have problem your camera lens spring that retracs during power on or off is either broken or off track, you shoudl approach fuji in replacing them...

Please leave me comment, if you need further assistance
RNj VINODKUMAR
Repair Help & Product Troubleshooting for Fuji FinePix E510 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Down loaded pictures, now when power up the lense doesn't open, screen is lit


Hi,\015\012\015\012SOLUTION 1:One possible reason for this error is if the camera is switched on and the lens unit is prevented from extending. The camera will struggle for a second to extend the lens, then repor ... Fuji FinePix E510 Digital Camera

I Have a Canon powershot A410 and I cant get it to work anymore. The lense will not open and it beeps at me and then E18 shows up on the bottome left hand side of the screen. I can still down load all my pictures and look at the pictures on the camera, just unable to open the lense to take more!


The "E18" or "Lens" error message indicates an error that involves the lens unit or lens cover.\015\012 \015\012 \015\012 \015\012This error may appear where the lens is prevented from properly\015\012extending or retra ... Canon Digital Cameras

Blank screen i was taking photo and i think the battery went off and the lense could not go back inside, it took like two days for me to replace the battery. When i put a new battery, later the screen went back inside but caanot open. the screen still black. when i press the on button, it shows the power on the auto only and cannot show any picture. what could be the problem? thanks


Ssue:\015\012\011\011The LCD/Electronic Viewfinder will not display an image or the image is distorted.\015\012\011\015\012\015\012\015\012\011\015\012\015\012\011\015\012\011\015\012\011\015\012\011\011\015\012\011\015\012\0 ... Canon PowerShot A520 Digital Camera

Ive had my Camara a while and I really wanted too take pictures today. But when i turned it on it said access, went in and out 3 times, and then said 'turn power off' Ive tried loads of things, such as; Giving it a little tap and pushing the lense, pulling the lense. and i i've even tried initalizing it so many time and that doesnt even work. Soo what am i suppost too do?


Change the batteries....make sure the card is sitting in it right...try these ... Digital Cameras

Downloaded to computer, now when powered up lense not open and the screen stayes lit with a wierd shape. can you help


Disconnect the camera from the computer, remove the battery and wait 10 minutes, place in the battery and turn it on normally. ... Fuji FinePix E510 Digital Camera

Canon Powershot SD450 E18 problem: The camera lense would not open and reported error code E18 on power-up and then would shut down. I followed a procedure on the web for this issue and got the camera lens to open and it was working (able to take pictures for about a minute). When I powered down, the lense did not completely retract. I tried re-powering on but nothing happened. The camera is not getting any power. I figured the battery died so I re-charged it. I put the fully charged batt


... Canon Digital Cameras

Optio M20 Camera: Press on/off button to power up camera, the camera opens the lens cover, turns on a red led inside the lens, cycles the lens out and back in,then makes about 5 little popping noises. The back screen shows Pentax Optio screen for a second, then then the screen displays the word Auto Picture in the center of the screen and Green Mode at the bottom and at the same time it cycles the lens out and in. And for a brief moment in the back ground of the screen you can see the picture st


I got it!!! on my cam i hold down the menu button at the same time power on, it will showup a " ver 1.00" and lens move a little maybe u have to do it 2 times but second time it should work ... Pentax Optio M20 Digital Camera

Transfering pictures I dont have a memory card yet, so my pictures are saved to the camera's memory. I use the plug to transfer my pictures to my computer. I plug in the camera, then turn it on. The lense usually comes out and something pops up on my screen of my computer that asks me if i want to transfer my pictures to a folder on my computer, but now the lense doesnt go out when i turn it on while it is plugged in...and on my computer it says that the pictures are being transfered and then it


You must start the Explorer (windows key + e key).\015\012You should see your camera on the left.\015\012Right click on it.\015\012Click on properties.\015\012Click on Test Camera.\015\012Click on Set time (in order to s ... Nikon COOLPIX P4 Digital Camera

I have a sony cybershot, model DSC-W55. when i press the power on button, the camera does not turn on as it usualy does. instead, i get a black screen with the word Access on it. (also, when i turn the camera on, the lenses keep going in and out more frequently than before.) so the screen Access screen is just there right now, but when i click buttons like menu or display it makes beeping noises and it says 'press power on and off again '. i can still view the pictures i've taken but can't seem


You can try contacting Sony - maybe through online chat if its available for free. From what you have described, it sounds like a hardware failure. Contact Sony, and if it is a hardware failure, they will replace it for free. Or, if you have bought i ... Sony Digital Cameras

Stuck Lens I fell on my camera just recently and the lens is stuck open half way. When you power it on it moves a bit to the side and up, then to the other side and up and then beeps couple of times. You can view all the pictures and see the opening screen when you turn it on on picture-taking mode but it won't open up completely. Is it possible to fix? If so how?


The following blog outlines some repair options for a lens error. They won't work for all cases, but they're worth a try if the camera's no longer under warranty:\015\012\015\012 ... Canon PowerShot SD400 / IXUS 50 Digital Camera

My lense wont close. When I hit the power button on, the lense clicks and the screen says "turn off power off and on again" and will not allow it to take any pictures. When I turn off the power, it clicks like it wants to shut, but is unable to.


I am afraid you have bad the lens assembly and it needs to be replaced. ... Sony Cyber-shot DSC-W80 Digital Camera

Brought my cyber-shot to the beach and had it in a camera case. When I got home it was a little bit moist on the inside of the case, and the lens would not open at all. On the screen it said to power the camera on and off again. There were a few grains of sand around the lens so I gently tapped in and it opened. Now, although it is opening I still cant take pictures. It is still giving me the same message to power it off and back on. Is this fixable?


How long since this happened? Has the camera had time to fully dry out?\015\012Open all orifices, and let it sit on a dry paper towel, or cotton towel somewhere safe until it is fully dried out. Remove the batteries from all locations before y ... Sony Cyber-shot DSC-N2 Digital Camera

Lense problem When i turn the camera on in picture taking mode the lense does not come out all the way and if i push it again it still does not come out and then when i push the power button a third time it closes the little bit it opened... but not all the way. However if the camera is in play mode and i turn it on, the lense comes out all the way just fine... then goes back in on its own and i can view the pictures. Because of this it appears the mechanism is working fine but there is maybe


Dear jmgrev,\015\012\015\012Whenever you turn your camera on and your lens doesn't go in and out properly you are likely experiencing a lens error of some sort. Look for an error 18 or a "lens error restart camera" message. If either of t ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

I dropped my canon rebel xsi from about 7feet, but it still took pictures after i checked it. nothing cracked, not the lense, or the screen. but than about an hour later, when i tried taking pictures it said error 99. i took of the lense and tried cleaning it inside, and when i put it back on it still said error 99. it says shooting is not possible. turn the power switch to off and on again, or reinstall the battery. i did those, but the error 99 keeps poping up. i dont know what to do?


It could be several problems. One is a bad contact between lens and camera body, clean the contacts , check for damage and try another lens if you have one. Try another memory card. Another problem could be with the shutter which would need the camer ... Digital Cameras

I have a sony cybershot DSC-W210 and just recently the flash wont work when its on any mode to take a picture it has the flash symbol on the screen flashing and the code E:91:01 underneath also flashing its takin pictures as normal just without the flash it wont let me change the settings of the flash at all. Apart from this the camera lens shutter seems to be sticking when i turn on the camera it doesnt always open i have tried cleaning the lens but it doesnt seem to make any difference!


I have a sony cybershot DSC-W210 and just recently the flash wont work when its on any mode to take a picture it has the flash symbol on the screen flashing and the code E:91:01 underneath also flashing its takin pictures as normal just without the f ... Sony Cyber-shot DSC-W70 Digital Camera

Faulty Lens? Sometimes when looking through the LCD screen the colours appear blended, overlapping and blotchy which makes it difficult to get a clear view of the item to be photographed. upon turning on (sliding open lense cover) screen view is distorted, "stretched", and item to be photographed is almost unidentifiable. Camera operates but pictures taken are "stretched" and distorted. However, stored pictures can be retrieved and are normal. Any advice?


Dear Swetnam\015\012\015\012 This is a internal circuit problem/defect and cannot be done on our own, so u should take it to SONY service centre. Avoid keeping the camera near hot temperatures zone. Sony is not tolerant to many physic ... Sony Cyber-Shot DSC-T1 Digital Camera

Turn the power off and on again....this is what appeared after i download some pictures to my computer for the first time. When I do this the same words appear on the screen and I am unable to take any pictures When I turn on my Cybershot DCS W90, A message sayes 'turn the power off and on again' the lens does not open and I can't take photos but can see photos stored on memory card.... what do I need to do to fix this?


I have a Sony P32. Found the answer on another board'\015\012Hit the front of the camera where the lens is on carpet a couple of times. I jars the problem loose ... Sony Cyber-shot DSC-W100 Digital Camera

CANON POWER SHOT SD750 DOESNT TAKE PICTURES BLACK SCREEN


Mine started working again. The only thing I can attribute to it is that I zoomed the lens in and out several times. The next time I turned it on, it worked. Go figure. I'll update if things change. ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

CANON POWER SHOT SD750 DOESNT TAKE PICTURES BLACK SCREEN


DON'T DUMP YOUR CAMERA JUST YET! I HAVE BEEN ABLE TO LOCATE SOME INFORMATION ON YOUR CAMERA AND SOME THINGS FOR YOU TO TRY. FIRST YOUR CAMERA SITE SAYS THERE IS A SWITCH ON THE BACK SIDE OF YOUR CAMERA THAT SAYS " DISP " WHICH I ASSUME MEANS DISPLAY. ... Canon PowerShot SD750 / IXUS 75 Digital Camera

My Canon Powershot SD1000 acts like it shuts off when I try to upload pics to my computer. When I plug the usb into the computer and the camera into the usb the Camera will still work perfectly fine in picture and video mode, but when I put it in the mode to view my pictures because once I do that the computer dectects the camera to open the program to transfer the pictures the screen goes blank before my computer can detect it and it looks like it shuts off, but thje green power light is


Consider NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer ... Canon PowerShot SD1000 Digital Camera

I press power and the lens opens and shuts but dows not allow me to take picture. The screen reads ''tune the power off an on again'' but turning powers on/off does resolve anything.


Hi!You may try removing the Battery from the Camera then press and hold the power button for 30 seconds. Then, reinsert the Battery and turn the Camera ON. Please make sure that the Battery pack is fully charged. Next, check if the Menu o ... Sony Digital Cameras

Black screen MY Kodak Easyshare C913 powers up and shows screen with info(9.0mp, arrow left/right etc) but a background black screen instead of the view of the picture your preparing to take. The lens is extending, and the shutter is open...ideas?


CCD FAILURE !\015\012\015\012Just Call KODAK they will do it FREE OF CHARGE ! ask them about BAD CCD !\015\012\015\012it is a known manufac fault and all are doing it FREE !\015\012\015\012Pls rate me WELL ... Kodak EasyShare C913 Digital Camera

When i power the camera the lens appears to open however the lcd screen is black then when I take a picture and review it it is black as well. I think the lens is not opening even though I can hear it open


... Canon PowerShot A570 IS Digital Camera

SDI card full, keep getting FORMAT message, can't transfer images to computer.Have not pressed FORMAT button. Camera will not let me take fresh pictures - always loads the screen stating POWER OFF or FORMAT. I want to download pictures to my computer but it won't let me. If the card has inadvertently been emptied (FORMATTED?), why won't it let me take new pictures?


... Olympus Camedia C-310 Zoom Digital Camera

I can't turn my camera on,I press the power button,it gives me a whirling noise,the lenses come out(but not all the way),the picture on the screen is blurry,and I can't make a shot,and after2 seconds the lenses come back in by itself.Then it does it again,without me even pressing any button!But I can still view my pictures.But I can't download them on computer,because it still displays an error message D: 5fo8 5e02,and the lenses start moving again.I don't know how to fix it.Please help me.Becau


The camera may be faulty or it needs to be reset to the factory settings.\015\012Try removing the battery leave it out for at least 1/2 hour, then replace the battery.\015\012If it doesn't work then you need a new camera. ... Olympus Stylus 700 / 700 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4930 seconds