Having problems with your Fuji FinePix E550 Digital Camera ?

Image has fingerprint and over exposed

\015 I have a Fujifilm Finepix E550. The image has whirls like fingerprints, and shots takenin daylight are particularly light. Shotstaken indoors are not as bad but rathergrainy. images on video record are fine whichsuggests the problem is not the lens****\015

Answers :

Mke sure not to shoot towards the sun when outdoors. When indoors, control the ISO manually, do not let the camera decide, because the camera will always choose the highest ISO setting, and this is the most 'grainy', containing the most digital noise. Try to choose either 100 or 200. This should help with your problems...
Repair Help & Product Troubleshooting for Fuji FinePix E550 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Image has fingerprint and over exposed


Mke sure not to shoot towards the sun when outdoors. When indoors, control the ISO manually, do not let the camera decide, because the camera will always choose the highest ISO setting, and this is the most 'grainy', containing the most digital noise ... Fuji FinePix E550 Digital Camera

My Panasonic DMC-TZ3 in any shooting mode produces the following both on the screen and in a captured image: a blurry, snowy, magenta-tinted (visual noise?) presentation. At one point, it produced several normal images, then returned to the problem. The playback mode produces normal images from sored normal images. I have never dropped the camera or exposed it to high heat or cold. I have 3 batteries and none produce any variance in the bad image. I've tied all settings and reset. Up until the


The problem you have mentioned is definitely a case of image sensor malfunction since the distortions are appearing in the pictures too. Getting the imagesensor replaced is the only way to fix this problem. ... Panasonic Lumix DMC-TZ3 Digital Camera

Image quality Hi. When I'm taking photos and set my exposure manually on my Canon 20D, the image looks right exposed on my LCD screen, but when I download all the photos on my PC, all the photos are VERY DARK. This takes lots of time for me to edit it and then after I've got the right brightness on my PC I discovered that the image quality is VERY BAD!!! There is lots of noise on the image. Can someone help me to find a solution to correct the exposure on my camera, so that I can save time on my


Hello there,\015\012\015\012If you are correctly metering the exposure of your photos, and you suspect it may be the camera, try resetting the camera to its default settings using the menu. Clearing all the custom functions as well can sometime ... Canon EOS-20D Digital Camera

I have just bought a Lumix FZ18 camera (July 08). It worked perfectly on all settings at first, but has now developed an apparent fault in which it shows an overexposed image on all settings apart from automatic. When the shutter button is partially depressed, the image in the viewfinder or on the screen shows as normal, but when the shutter is activated it immediately reverts to over-exposed and the resulting image is the same. Can you advise please


Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. Fix #2: Remove the bat ... Panasonic Digital Cameras

When shooting indoors with my 300d (base rebel digital),I have been encountering some light metering problems.I use the 430ex as an external flash. While shooting a subject in front of an external light source-(window, etc.), no matter how small of the frame area include the outside light source, the cameras light meter will invaribly expose the entire image based on the outside ambient light, causing the image to be grossly underexposed. Do you have an explanation/solution for this aggrivating


Set the metering mode to Partial Metering. This uses only 9% of the field of view, centered around the middle square in the viewfinder, as the subject area. If you still find it too bright, try changing the exposure compensation a couple of clicks. ... Canon Digital Cameras

Canon Rebel XTi over exposes images in auto setting


Try in reset the camera to factory settings.\015\012\015\012If still you have a problem, then try with a different lens.\015\012\015\012\015\012Best regards, ... Canon EOS 400D / Rebel XTi Digital Camera

Getting blue spots on longer exposed images?


This link might provide some insight: imageskill.com ... Nikon D100 Digital Camera

Orange blue lines, image over exposed for outdoor shots


Hi,\015\012\015\012You might have chosen either to fast an ISO (i.e. 800 or 1600) or you have too much light entering the lens (sensor) in other words the automatic exposure is turned off manually or there is a fault, check first the menu optio ... Kodak EasyShare Z612 Digital Camera

Can't see image I want to shoot through lense. Lense is exposed.


It is ccd problem.I hope u using it after long time.After replacing ccd it will work properly ... Sony Cyber-Shot DSC-T1 Digital Camera

High shutter speed causes band of over exposed image


I would suggest to check the lens inside. there might be some kind of small item inserted inside.check if this happens with no zoom and full zoom.if the problem persists, I would suggest to first have it checked with another lens just to ... Canon EOS-10D Digital Camera

Olympus FE-210 When taking a still photo it displays over exposed on the screen. You cannot make out the image, it is just all white?! Help


How can I fix this?! ... Olympus Stylus 700 / 700 Digital Camera

Hi, im getting an overexposed effect on my still shots.. almost a whiteout and then i may get a normal exposed image with a subsequent shot all my settings are on auto.. my video recordings are normal. whats my prob?


Hi\015\012\015\012best place to start with would be t reset the settings to factory defaults\015\012\015\012this will set any high exposure, shutter, aparture settings that have stayed back to normal \015\012\015\0 ... HP Photosmart M525 Digital Camera

Bit of a serious FixYa for ya! My Fujifilm e900 has picked up sand (& possibly a little water from damp towels) probs from trips to beach. Picture quality now affected for the first time ... loads of horizontal white lines over all images, which also appear over-exposed. Any help appreciated, as I'm now discovering the common shop wisdom of 'not worth fixing/cleaning, just buy a new one'.


This is a common enough problem, and repairable if you have the patients and aptitude, with digital cameras.\015\012You will probably find that video is un affected. This is the one clue as to your problem of white lines or over exposed picture ... Fuji FinePix E900 Zoom Digital Camera

I am able to transfer images to my computer, but when I try to turn the M893 camera on when it's not connected to my laptop, the screen comes on for a second or two, lens comes out, green light is on and then blinks and turns red and blinks and then lens goes back in and camera turns off. I've tried removing the battery, wiping it off, putting it back in, camera also wont charge. It's never gotten wet or been exposed to extreme heat


It has problem on the lens. Lens doesn't extend when transferring pictures that's why it works. Kodak cameras are designed to automatically shut-off when the lens is struggling to go in or out.Follow step-by-step solution and repair on ww ... Kodak Easyshare M893 Digital Camera

Hi all, I wonder if you can supply some advice regarding a Sigma17-35mm lens I purchased earlier in the year. Basically if I use the automatic or 'P' setting on my Canon EOS 30D camera the image is over exposed by 1 to 2 stops. If I use the same functions with my Canon 18 -55 kit lens the exposure is correct so I would presume the camera is not causing the problem. The only way I can get a correct exposure with the Sigma lens is to compensate manually for each shot. Please note the exposure p


Try your EOS in AV (aprature value) mode. You should be able to adjust your aperature value in 1/3 or 1/2 steps dependind how you have your Custom Functions set in your camera's menu. Possibly the lens you purchased is for an EOS 35mm. If you use a 3 ... Sigma Digital Cameras

Zoom error I turned my F470 camera on and received a "zoom error" bar across the screen. The lense does not move outwards after I turn the power on, nor does the plastic sliding screen close when I turn the camera off. The lense is exposed whether or not the camera is on or off. The lense does not make any sounds when I turn the camera on, but I hear (what I think) are the gears when I turn the camera off. When the camera is on, the screen is working, but the image is blurry. I tried other poste


Hey MBB722,\015\012 What is most likely going on is there is something stuck in the lens obstructing its movement (i.e. sand). I don't know what you have tried and what you have not tried you can try placing the came ... Fuji FinePix F470 Digital Camera

I have a Sony cybershot DCS-W5. Recently when I have taken photos some of them look as if parts of the shot are double exposed with previous photos or have parts of the same picture mixed up. In addition some shots when previewed on the screen are reduced to a small square and if I try and increase the size I get message 'image size over'. This has only stared happening when I bought a new stick. I have to use an adapter because Sony stick are now smaller than previous types.


Kindly format the mem stick in Laptop or card reader and then format once in Camera menu options thru Format command and then see this actually it seems like file format has corrupted or after u bought this stick new and one more thing if ... Sony Cyber-shot DSC-W55 Digital Camera

HAVE DMC FZ1 THAT PICTURES ARE OVER EXPOSED VIEW FINDER IS OK BUT RECORDED IMAGE IS WASHED OUT


HiUse any photo editing software....Thanks ... Panasonic Digital Cameras

Canon S1IS image is blurry "vertically" and has fine lines horizontally. i used my camera 3 days ago with no problem. it has NOT been exposed to moisture. i DID leave it in my car over the weekend, but it was parked in the shade and the outside temp never got over 85. HELP


I am sorry to inform you that your camera is showing clear signs of CCD sensor failure ( it's sensor is still working but the problem with 'noisy' image will get worse see the enclosed pic of CCD sensor from a canon camera ). \015\012The good news is ... Canon PowerShot S2 IS Digital Camera

Over exposed images sony dcr-sr33 - Digital Cameras


You have a defective CCD which need to be replaced by a camera or camcorder technician. ... Digital Cameras

With Macro flash unit attached, and using the closest subject distance, images are extremely over-exposed.


The camera fails to control the flash output automatically due to the high intensity of Macro ring flash, causing the image to be over-exposed. Please set the camera as below to prevent a undesired result. Camera and Flash Settings - Set the sensitiv ... Konica Minolta DiMAGE 7 Digital Camera

I have an Olympus e-400 SLR Camera. When I view the images on the Camera screen, they seem to be perfect.When transferred from the camera to the computer, once on the computer screen they seem to be a bit darker, in 35mm terms, they look about at least half a stop under exposed. Al pictures are that bit darker on the computer screen, especially those taken not in sunshine. Can any one Help, Please?


Hello Bmills914,\012i suggest you to visit the following olympus webpage.http://www.olympusamerica.com/cpg_section/cpg_support_faqs.asp?id=1372Since the webpage has a variety of information. once you have open ... Olympus Digital Cameras

My olympus FE-190 camera was working great. Now when I take a photo the screen gets bright horizontal lines and when I go to the photo image taken it is all over exposed with the same lines.


It is nothing but the grid lines option turned ON.go to menu settings and turn it off. ... Olympus Digital Cameras

Canon EOS 300D, images suddenly show three quarters black, only top quarter seems to have been 'exposed' what is up?


... Digital Cameras

Canon has announced a problem with some of the CCDs used in its digital cameras and camcorders which causes images not to appear or appear distorted. This is due to a malfunction that means the wiring in the CCDs may come undone if exposed to high temperature or high humidity. The affected cameras are the PowerShot A60, PowerShot A70, PowerShot A75, PowerShot A300, PowerShot A310, Digital IXUS V3, Digital IXUS II, Digital IXUS IIs. Canon advises anyone experiencing these problems to contact them


Oh it's more than just the cameras you list, and also includes some video cameras.\015\012\015\012Canon will fix these for you for free if they're experiencing symptoms of CCD failure (black, lined, discolored, or distorted images). This ... Canon PowerShot A70 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0583 seconds