Having problems with your Fuji FinePix F460 Digital Camera ?

Unable to access menu

\015 Just tried taking photos, normally the photos are visible for a short time. This no longer happens. I tried to access the menu, but to no avail. I am unable to turn on camera with right arrow button on rear of camera next to f button. Disp/Back button doesn't work either. I can turn flash, macro and redeye on and off when camera is on Auto. When it is on SP no buttons work except the shutter. When camera is on SP the macro, flash off symbols are on and there is also a symbol of a film cartridge with a C ( I haven't noticed this before). Video also works, but also unable to view it\015\012\015\012Screen on Auto and SP also shows 5M N 373 in top right corner\015\012\015\012Battery is fully charged\015\012\015\012I am able to download photos to my Laptop without problems\015

Answers :

Hi and welcome to FixYa,

Initially, it would appear that all the hardware perform nominally. This would then indicate that it is the software half that has some glitch. The software/firmware normally could be re-flashed or updated but would require specialize equipment/interface which are not readily available to most user(s).

This then would require the services of an authorized service center for Fuji digital cameras capable of handling your camera's specific requirement. If the cost of repairs and downtime would be factored in, then you may have to re-evaluate your options of having it repaired and/or consider a replacement.

Good luck and Thank you for using FixYa. Happy New Year.
Hi\015\012
\015\012Use an eyeglass screwdriver to remove the back half of the case. (6 screws, 2 screws each on sides and bottom) When you remove it, the ribbon cable for its buttons comes out just by pulling. You now see the LCD (which is fine), its cable connection (lower right), its power connection (two wires on right). Either these wires have come unsoldered (easy to fix without microsoldering capability) or some part of the power supply for the LCD backlight is bad (very hard to fix, you probably need a new motherboard). When you put the case back on, first you have to plug in the ribbon cable - first open the tiny black plug lock out and around to the left, put the cable all the way in, then lock the black part back right and in. Screw the case back on and you're fine.
Repair Help & Product Troubleshooting for Fuji FinePix F460 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hi, I have a panasonic Lumix, DMC-FS5 digital camera. When I turn the camera on and it's on 'photograph' mode, a message keeps appearing after a couple of seconds saying: "please turn camera off and then on again". I get the same message everytime and am unable to take any photos or even access the menu options. There are no problems when the mode is set to 'playback' mode. The images are still there and I can scroll through, as well as access the menu.


Hi,I had this same problem. I have just pulled the lense (not with any major strength) when it was fully extended. This seems to have solved it for me!! ... Panasonic Lumix DMC-FS5 Digital Camera

Unable to access menu


Hi and welcome to FixYa, Initially, it would appear that all the hardware perform nominally. This would then indicate that it is the software half that has some glitch. The software/firmware normally could be re-flashed or updated but wo ... Fuji FinePix F460 Digital Camera

Lcd dark i'm on vacation and have no access to a manual.. my lcd is DARK! I can vaguely see a menu and can scroll down but have been unable to "brighten" my screen for normal viewing. Is there a simple button to push or place on the menu? Any suggestions? Thanks!!!


Use an eyeglass screwdriver to remove the back half of the case. (6 screws, 2 screws each on sides and bottom) When you remove it, the ribbon cable for its buttons comes out just by pulling. You now see the LCD (which is fine), its cable connection ( ... Casio Exilim EX-Z750 Digital Camera

Following the instruction manual, I'm unable to access the setup menu, just how the &^%$ do you enter setup?


Press the menu/set button...see the icons on the left?....see the wrench at the bottom?...scroll to that and you are in the setup menu. ... Panasonic Lumix DMC-ZS3 Digital Camera

The lens is stuck 1/2 way out and I am unable to access the menu and have taken the batteries out and even replaced them.


The lens has probably got something in the retraction mechanism that is stopping it retracting. This can be something as simple as sand or grit or as a result of a drop or knock. In most cases the camera will need to be stripped apart to remove the l ... Nikon COOLPIX L18 Digital Camera

Inserted new memory card error message:memory card error unable to access format under menu


I'm guessing that you bought a new 4GB SDHC card. Although it looks exactly the same as a standard SD card, the format the card uses is very different. Unfortunately your camera was designed before the SDHC format came out. Sorry, but a SDHC card wil ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

Hi. I have a Canon Xsi/450D Camera. I can access the menu funtions when in the preset modes eg. landscape, sports etc. but when i rotate the dial past the Auto mode into the manual settings modes(the creative zone as canon calls them) the menu funtion will not work. I push the menu button and nothing, the remote funtions will not work either. I've tried to update the firmware, but as you have to access the menu in the manual modess to do this i cant update the firmware either(also cant do


The manual mode runs off power from a separarte capacitor. The capacitor holds a charge which is greater than the voltage of the battery for the needs of this option. When a capacitor fails nothing will operate in the manual mode. You will need to ha ... Canon EOS Rebel XSi Digital Camera

Calibration? I can't access the menu in my camera. It doesn't recognize when I click on menu, and there are some options I click not above it, but in another place on the screen and it activates that option. I think I need to calibrate it, but I can not access the menu to do so...


What are you exactly trying to access or get to that one part of the screen will let you get to that option and another isnt? ... Sony Cyber-shot DSC-T50 Digital Camera

I bought a second hand Sharp VE-CG40U Camera and am unable to format the internal camera. The format selection in Menu is grayed out. What can I do?


Make sure you use an SD card, 2GB and smaller, and not an SDHC card. ... Sharp VE-CG40U Digital Camera

Menu access When I go into the menu with the pencel icon I can only scroll down to 6 and I am trying to access 15 to change the display timer. Any one else have this problem?


Start by going into the "wrench" (spanner?) icon, then over to "CSM/Setup menu. Select the "full" option, then you should be able to access 1-17 in the Custom Setting Menu. ... Nikon D40x Digital Camera

Menu i can only get the record and set up menu , but cant access the play menu


... Vivitar DVR310 Digital Camera

Menu Locked Whenever I try to click and access the menu mode, a small picture of a lock pops up. How do I acces the menu mode?


While in capture mode, hit the green (delete) button.\015\012\015\012You can change modes from here. :) ... Pentax Optio W10 Digital Camera

DMC-FZ18...unable to download photos off card....have loaded software . taken out other photo software , still unable to download .. Do everything right up to where it says prepare for aquisition ..yes...unit';s coming up unable to download ...tried to just view photos and coming up..no photos...Have tried with anmother card that I downloaded on my previous camera . It wouldn't download .. Frien has tried in their computer .cant' access photos. Had the little brother of this one x12..it was so


Have you tried Picasa? Free from Google. Does your PC see it as a drive? Are there proprietary drivers for the camera? Try using a USB hub instead of the USB ports on the PC. ... Digital Cameras

Hi, I recently purchased a D2Xs floor model or demo unit form a liquidation company here is Kansas City. The problem is that I have no menu options and the only thing that comes up when I access the menu on the camera is a small setup menu with about 6-7 options, none of which include a reset or any additional features. This renders the camera practically useless as most of my dials will not work because they need to be directed by the firmware. How can I reinstall the original version 1.0 firmw


... Nikon D2Xs (Body Only) Digital Camera

Access to menu on sony cyber-shot DSC-T9


You can download Instruction Manual / User Guide of DSC-T9 from Sony Support and will get to know every thing about thi ... Sony Cyber-shot DSC-T9 Digital Camera

Date/time stamp control in Menu won't allow access


In many cameras these settings depend on the shooting mode. Did you change the shooting mode? If so, return to your normal shooting mode and the function should be available again.If this doesn't fix your problem I need to know if you h ... Canon PowerShot A530 Digital Camera

Optio E10 When I turn my camera on I get an error message that says "memory card error", I purchased a new memory card but still get the same error message...any suggestions? I have the exact same problem with my Pentax Optio S7. I turn on the camera and it displays the message Memory Card Error. I have tried several new cards and get the same message. There is an option on the menu to format a card, but you can't access the menu if you have the card installed. It takes great pictures without t


HelloOK, if the memory card itself is locked, you might \012sometimes get this error code. All you need to do is to take out the \012memory card and switch the lever on the left side to the unlock. ... Pentax Optio S7 Digital Camera

I can't access current photos from memory card, only old photos show up stored in built in memory. Also can not access "copy" from the menu, and nothing will download to my computer. All this worked fine for months!


"copy" is accessed from the playback menu. If that isn't available, decide if the pics stored in the internal memory are important. If not, format the camera with no memory card inserted to erase the internal memory. If you need those pics, then down ... Panasonic Lumix DMC-FS3 Digital Camera

I have a ?Nikon Coolpix P90 Digital? camera and require some advice on the menus shown. On opening the menu programme there are 4 icons which appear on the left hand side of the screen. The first one is A ?letter? P or A or S or whatever etc???, the second icon is an ?Arrow? pointing to the right, the third is a ?Spanner? and lastly a ?Question mark?. For each programme one can easily access either the ?letter? and / or the ?spanner? mode. Could you please advise me how can one access the ?arr


... Nikon COOLPIX P90 Digital Camera

I CAN'T GET THE DATE TO TURN ON. IT WILL LET ME RESET IT, BUT IT WON'T LET ME TURN IT ON. When I go into the menu setting, it shows that the date is turned off and I can not access another menu that will allow me to turn it on. I need to date stamp pictures for work. Thanks for your help.


The date/time stamp only works in "Postcard" resolution. Press the "Func Set" button, then scroll down to the bottom to select postcard resolution. \015\012\015\012Then press the menu button. Select the "Camera" menu, then scroll down to the th ... Canon PowerShot SX100 IS Digital Camera

Menu button doesn't work. Can only see pics thru viewfinder then have to unload pics off chip to view. Pics are always out of focus and discolored (usually too much red or yellow). Also can't use flash because of no access to menu. Would like a fix or will need to purchase another camera. This one is only 3-4 years old.


Check out Pentax- This modele may be subject to a recall for replacement. If it is is not - then the only remedy is to junk it and buy another. ... Pentax Optio 50 Digital Camera

I have a sony cybershot, model DSC-W55. when i press the power on button, the camera does not turn on as it usualy does. instead, i get a black screen with the word Access on it. (also, when i turn the camera on, the lenses keep going in and out more frequently than before.) so the screen Access screen is just there right now, but when i click buttons like menu or display it makes beeping noises and it says 'press power on and off again '. i can still view the pictures i've taken but can't seem


You can try contacting Sony - maybe through online chat if its available for free. From what you have described, it sounds like a hardware failure. Contact Sony, and if it is a hardware failure, they will replace it for free. Or, if you have bought i ... Sony Digital Cameras

Date Stamp I am unable to add a date stamp through the menu. That row in the menu is darkened/unavailable.


U might see that there are several modes of shooting the pictures...one of them is L = Large, M1, M2, M3, S, PostCard, WideAngle..Date stamp can only be used in only PostCard mode... ... Canon PowerShot A610 Digital Camera

I just bought a Nikon D60. I can't access "Metering" on the "Custom Setting Menu" "Metering" is not highlighted on the menu and I can't find the solution in the manual. Thanks, Stan


What exposure mode is the camera set to? You can only change the metering mode in the PSAM modes. The automatic point&shoot modes are automatic for a reason, the camera selects the metering mode and a lot of other things. ... Nikon Digital Cameras

I am unable to select the auto bracketing on my Nikon Coolpix P6000. I went to the camera shop i bought it from, but the guy had the same problem. It does show in the menue but i am unable to select it. Can anybody help?


Check page 143 in your manual. Auto Bracketing does not work when in Manual mode or when NRW is selected by itself or in conjunction with Fine, etc. Hope this helps. I'm trying to find a way to be able to enable Auto Bracketing in Manual Mode. ... Nikon Coolpix P6000 Digital Camera 13.5MP
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0445 seconds