Having problems with your Fuji FinePix F480 Digital Camera ?

When I press the shutter button the light flashes red and it beeps.On the screen it says Frame No. Full. What can I do to correct this problem


Answers :

It should tell you in the manual(if you have 1)
\015\012If you review your current photo's it should read in the top right corner the number of frames used. If your camera says frame number full then the numbers in the top right should read 999.9999 and you need to reset the counter.
\015\012To reset press menu and scroll down to settings. select FORMAT and format the current card in your camera. This will wipe everything on your card so make sure you have saved them to your pc first!
\015\012After you have formatted your card go back to your settings menu and select FRAME and set this to RENEW. Now come out of the menus and take a picture. Review the picture and the counter in the top right corner should now read 100. 0001 your counter has now been reset. Now go back to the settings menu and select FRAME again and set it back to CONT (continuous). Note: The counter has been reset for the current picture card only. Other picture cards will display the previous counter readings saved on to that card and will need to be FORMATTED in the same way to reset to 100.0001
Repair Help & Product Troubleshooting for Fuji FinePix F480 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

When I press the shutter button the light flashes red and it beeps.On the screen it says Frame No. Full. What can I do to correct this problem


It should tell you in the manual(if you have 1)\015\012If you review your current photo's it should read in the top right corner the number of frames used. If your camera says frame number full then the numbers in the top right should read 999. ... Fuji FinePix F480 Digital Camera

THE TURNER IS ON GREEN ICON. I SWITCH CAMERA ON. I PUSH THE SHUTTER BUTTON TO TAKE A PICTURE. THE FLASH RELEASE UPWARDS CORRECTLY IN FULL. HOWEVER. ON THE DIGITAL DISPLAY, IT NOW REFLECTS ERROR 05. IF YOU NOW PUSH THE SHUTTER BUTTON AGAIN, IT CLICKS THREE TIMES, REFLECTING THE SAME ERROR CODE 05 WITHOUT TAKING ANY PICTURE. IF YOU NOW PUSH THE SHUTTER BUTTON AGAIN, IT DOES NOTHING. PLEASE ASSIST WITH ADVICE TO FIX THIS PROBLEM


Error 05 is not uncommon with the Canon Digital Rebel XT camera.On front on the right hand side under the flash there is a small prong \015\012which is connected to a switch that monitors if the flash is\015\012 released. This switch ofte ... Canon Rebel XT / EOS 350D Digital Camera

Nikon d80 dslr camera working fine and then one day turned it on to take pictures only to find an err message flashing and when the shutter button depressed it says r04. The shutter sounds but no pictures are taken. Is this a problem inside the camera that will have to be fixed by a professional? Also tried charging the battery and charger says the full charge is complete but when put into the camera it does not show a complete charge in the battery info. Please help don't want to send my camera


HiI am sorry to hear, but you will have to some professional. Regarding your d80 has common problem of sequence unit defective. I believe that is the problem and your local repair shop would charge around $75 to 235 depend on what they really want ... Nikon D80 Digital Camera

I pressed the format button to yes on my camcorder while searching for something else and now my screen says no image. I can't seem to access any of my photos or recorded film. Can this problem be corrected. I have a SD card in the camera and I was locking all the media I took to the card (or at least I thought I was. I just came off vacation and can't find one picture.


Hi,There is file recovery software, Pandora Recovery, click to download (its free) and install it in your computer, hook your camera with computer and run Pandora Reco ... Digital Cameras

Blank lcd I just got a new canon 600D. After playing with it for a while, i turned it off. Then after 5-10 mins i turned it on once again, and opened the lcd screen, but it shows blank(or say black). I can see that the lcd backlit is workeing, but nothing (no content) is displayed. Can this be an issue of low battery ? pressing the shutter button full also not capturing the picture. Flash works though, and optical view finder too, but it does not capture the photo.


Hi there:Some symptoms of a defective CCD include distorted images or abnormal colors, scratchy purple lines, blank or black pictures, and/or black videos with good sound being recorded on the camera's flash card. ... Canon EOS 600D Rebel T3i Digital Camera

My fugi finepix s1500 is displaying the Frame No. Full on the screen. Everything I have read says just to go into the menu and change it from continuous to renew. I did that and it worked but then my camera turned off and the Frame No. Full is back on the screen and I can't get it to go away no matter what I do. How do I fix it?


... FUJIFILM Finepix S1500fd Digital Camera

I have some problems with my new G11. During first photo walking after 2 ours of working I met problem with system. When I use any button (except shutter) on screen appears menu of light lamp and active area blinking back and forward, I can't stop it. When I open viewer to see my photos then after use any button it started to scroll trough all pictures in memory and I also can't stop it. help to stop it is only to switch off camera or use shutter. Could you help??


Have you really spent any time reading the owner's manual? ... Canon PowerShot G11 Digital Camera

The camera was taking pictures a few days ago. The yesterday I went to take a picture and a blank screen came up but when I hit the shutter button in the view finder it would say "busy" and it would make a shutter noise the beep and not take a picture. Now it won't do anything. no screen picture. no beep. no shutter. no "busy". dead as a door nail.


Hi there, the lens detector in your camera circuit board is damaged or short. That's why its fully dead now. Try these for a luck. Remove the lens & power on the camera. Is any movement? if not then I suggest you please visit nearest Canon servic ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

Anti-shake problem My Konica Minolta 7D stopped taking pictures. It will still auto-focus, but nothing happens when you press the shutter button all the way down. The problem I experience is: 1. Shutter does not release. 2. When camera is powered up, after the initial lens shuffle a clicking sound is heard. 3. The auto shake bars (all five of them) to the right of the view finder are blinking 4. Show 0 (zero) as the number of frames remaining in the view finder. 5. The problem is intermitte


Symptom 1: referred to as FFB (Firts Frame Black). this is when you do not use the camera for a while and when you attempt to take the first snap shot, the Shutter is either stuck, or takes a blank/black picture (some cases the picture came out bluis ... Konica Minolta Maxxum 7D / Dynax 7D Digital Camera

My Panasonic lumax DMC-F3 is having problem with storing my photos it takes the image then goes to a black screen saying READ ERROR and then the screen turns itself off. and another problem i've been trying to delete some of my images but i click the delete button it comes up with a rubbish bin like normal but the images doesn't delete. what could be the problem ??


... Panasonic Lumix DMC F3 Digital Camera

Photo swhooting. I cannot take any photographs.I get an error report which says "press shutter release button again". I was taking photographs at a frienbds wedding when this problem suddenly came up. I pressed the shutter release button and the signal came back. I have done this several times wih no joy.


OK, don't worry. The repair is easy to be done, although a little "creepy". I have a girlfriend who owns a Nikon D60 which presented the very same problem, and this afternoon I repaired the camera myself. It's working very well so far. Here's how I d ... Nikon D40x Digital Camera

Hi, I have two Cannon 40D Cameras and am experiencing problems with both at the moment. One Camera is very slow after pushing the button to take a photo. I have checked all of the batteries and this is not the problem. The other camera will take 4/5 shots without a problem then as I am taking the shot I feel like the camera flutters, the lcd screen shows an error symbol and says the contacts between the lens needs cleaning. When I turn the camera on and off it fixes the problem temporarily but i


Problems like these can be addressed by Canonusa.com which can be contacted at 1-800-OK-CANON.\015\012 ... Digital Cameras

My sony I just got a DSC-S40 from a friend. I actually swoped my previous camera for this one. When I switch it on, the lens seems to get stuck and not come out all the way. I makes a grinding noise and does not show any picture on the screen. The flash goes off when I push the button, and the little guide dots on the lcd screen shows, but the the screen stays black. I am able to view the photo's that are on the camera taken before this problem, but am unable to take any photo's now. The shutter


I can fix your camera, it is not an easy thing to post because the post would be forever long....$20 and it would be good as new. ... Sony Cyber-Shot DSC-S40 Digital Camera

Hi there, im having a problem turning on my camera. I press th on/off button and the len comes out but suddenly the led below the "M" button flashes red and gets turn off, but if I press "viewing pictures" button, the camera works ok showing all the pictures and says that the baterry is full. I already cleaned the contacts, from the batteries and from the camera, and it still doesnt work. What could it be?


When u prefer normal camera function,camera will shut off,becaz in camera mode, the flash unit gets charged,since the flashunit is defective,the camera gets off.So, change the flash unit . ... Polaroid i531 Digital Camera

Error Message When I take a photo with Nikon D60 it's as though the shutter gets stuck and it gives an error message on the screen (Error! Press shutter release button again.) The top half of the photos are completely black. Also, there have been a couple of times during this problem that the shutter clicks and when looking through the viewfinder everything appears tinted. Weird, I know! Any ideas or suggestions?


Try to take off the battery and reset the camera. You can also try to remove the lens and check the mirror opening..see if there is some thing stuck there. You can try to click the shutter while the lens is removed. If this procedure didn't work I su ... Nikon D60 Digital Camera with 18-55mm lens

I have tried several cards. They all work on my other camera. It is not a problem with my card (in case you were going to ask). The problem is after I format the card, it reads the "frame no. full" when I try to shoot. When I press the play button it reads "no images" Any Ideas on how to solve this problem with my Fuji FinePix S3 Pro?


1. With no card in the camera, go into the menu and find "format"...follow the on-screen instructions to erase the internal memory.\0122. Insert the card and do the "format" thing again. ... Digital Cameras

Shutter problem Monitor says " Error, press the shutter release button again and I can not take the pictures..what should I do?


Before you go to the Nikon service,turn off the camera and try the reset switch near the USB connector,good luck. ... Nikon D40x Digital Camera

I loaded a Mini Digital Camera (3 functions) into my computer with your CD (included) on 4/13/08. Afterwards, I tried to go on-line using my Mozilla Firefox and it wouldn't connect. Instead, a miniature screen approximately 1" x 1" appeared at the top left of my full screen showing a small replica of the Firefox icon, then the minimize, maximize, exit signs. Underneath shows arrows left and right. I uninstalled the mini camera from my computer, but I'm still unable to correct this problem. Ne


Uninstall camera software from add remove program ... Digital Cameras

Hi there, I was taking photos with a 3 years old canon ixus 70 and suddenly the screen became black!! from then taking picture was impossible it comes out black too. All the menu buttons work properly, battery is full, sim card is correctly installed, video sound works but no images. This camera hasn't never been dropped and the lens looks pretty good. It doesn't come from the DISP. button because I first thought it was coming from this one but finally not... Any idea, ever heard about that prob


First verify that your camera is actually an SD500 (takes SD cards) and not an S500 (takes CF cards). If your camera is actually an S500, this would probably be a defective CCD imager. If so, Canon should fix this for you for free worldwide, and may ... Canon PowerShot SD500 / IXUS 700 Digital Camera

Problem I was taking a photograph of my CCTV camera with infra red night vision. The screen went blurred and then blank. After a few mins the full picture returned but is now a mirror image and upside down! Do you think the infra red is the cause, or is it just coincidental? Can the problem be rectified? I've tried the reset button but nothing happens.


It isnt the infra red.\015\012\015\012on you dvr machine there should be settings or settings on the camera for mirror and flip.\015\012\015\012these are features on better cameras and are normally on the camera body, but veiw ... Samsung Digimax A50 Digital Camera

Low Battery When turning the camera on, the screen often says "Low Battery", even if the batteries are brand new. The problems seems to last a few hours, then it turns on as normal. I have tried cleaning the contacts and the battery tubes, but nothing obvious seems to cause it, or solve it. Sometimes, it cuts out to "Low Battery" in the middle of taking photos, when the charge indicator on the screen has just been at full. Someone else asked this question on-line, but had no replies, and a frien


Try going to a service shop and asking to reinstall the firmware, this can fix the problem ... Samsung S1030 Digital Camera

I have a Cannon PowerShot SD750. The LCD suddenly went blank - dark all through, last month Dec.,08. I tried everything - reset, disp button, menu, power down, etc. to no avail. The best answer to my search for solution recommends sending it back to the manufacturer for a free correction of the problem which they say occurs when the camera is left in a too-hot-for-it environment, like inside a car on a sunny (hot) day. My problem is which canon address or telephone number do I contact? I am base


You bought it from a US retailer , so you should send it in for US warranty repair. Perhaps you can arrange return shipping from Canon's repair facility. \015\012\015\012My camera died in December 08, too, just past the warranty coverage, ... Canon PowerShot SD750 / IXUS 75 Digital Camera

Sd110 lcd My LCD did not work, canon repaired it....GREAT! but 2 weeks later it died. It was blank so I send it back and canon says they want money to fix. Damn.. It still takes photos with no problem. I cannot access any functions because the LCD won't work. I've tried the Display button and got the black and white screen of death. I have to take the card out to transfer photos. Canon says"UNIT HAS IMPACT/PRESSURE TO LCD". Do I need a new LCD or what. thanks, steve stokes


I have had my LCD screen go out in my small point and shoot as well, though i did not even bother with my company for the warranty was far expired. You could do a couple things. You could buy an LCD screen off ebay, or anywhere you can find it ... Canon PowerShot SD110 / IXUS IIs Digital Camera

My problem is with my Kodak z712 digital camera. I realize this site stated batteries but cannot get to a kodak website. So gonna ask anyway.....i took some pictures and went to the "review" button to check them out and all i get is a blue screen that says "no pictures or videos to display". I just took about 15 pictures and they are all gone. I have never had this problem before. Had the camera about 2 years. excellent camera until this happened. can you tell me what's goin on with it?


I would first check the memory card! Then I would try to reset the camera ... Kodak EasyShare Digital Camera Lithium-Ion Rapid Battery Charger

PC Mode I have one that for 2 secs maybe, I can see something I could take a picture of.  Problem is that on second 3 the camera screen has switched to saying PC Mode, even though it is most definitely not attached to the computer.  I have tried removing the battery and the cards and putting them back in, and still only get PC Mode.  Someone said something on another board about possibly a reset button, but I don't know if the sony dsc-s50 has one.  Has anybody else had a similar problem, or doe


Err 16/60 ... Sony Cyber-Shot DSC-S50 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4083 seconds