Having problems with your Fuji FinePix S1000FD Digital Camera ?

My Fuji S1000fd just stopped working with the lens out, tried replacing the batteries but the camera won't switch on.


Answers :

Fixing a Lens Error on a Digital Camera
\012
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Fuji FinePix S1000FD Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Has always worked fine, til just now. took a photo, went to put onto ebay and opened picture using windows picture and fax viewer. not happy with photo,switched off, removed camera from cradle (link to pc) and tried to take another photo, but when i switched the camera on i had an error message stating 'focus error' and when i tried to switch it off the zoom lens remained extended and will not go back into tne camera. I have read the manual and tried removing and replacing the battery, but this


For your information the computer has nothing to do with the focus error!!!!the error appears as a message due to either of these reasons.\015\012\015\012you have dropped down the cam.remember even a small drop may ca ... Fuji FinePix F410 Digital Camera

My Fuji S1000fd just stopped working with the lens out, tried replacing the batteries but the camera won't switch on.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Fuji FinePix S1000FD Digital Camera

I was copying my content from camera to Computer through USB, and in this process battery got down and camera got switch off. Then i charged the batteries and tried to start, but my camera is not getting switch on..... I bring it to the service center and they told me that motherboard has to be replaced......but i m not convinced with this. If you have any suggestion then please mail me at [email protected]


Remove the Battery pack from the Camera, then press and hold the power button on the Camera for 45 seconds. Then, insert the Battery in the Camera and try to turn it ON. Furthermore, please make sure that the Battery is fully charged. ... Sony Cyber-shot DSC-H5 Digital Camera

I had my kodak camera, when i try to used it i didnt noticed that my wife put the battery not in a proper way or she put it inaccurately and the battery is full charge. so when i forced to switch it on, it on for a couple of seconds then the powers gone after that. so i try to ask what will i do to fix my camera it wont power anymore? pls help. thank you


Hi,Please run through the link below, and maybe they can help you with your warranties or on how to repair you camera. ... HP Photosmart 435 Digital Camera

My camera battery ran out and when i plug it in to charge it with the original charger nothing happens at all, cant switch it on and it doesnt charge, it wont do off the computer either, i tried it with a dc adapter and i can turn the camera on while its plugged in with that but it still wont charge - is it the battery or the charger or both???


Yes replace both ,batterry and the charger,thath way youl be shure and the new battery must be charge for 12 hrs ...\015\012and should works fine after ..\015\012hope that will help you\015\012regards Alan.. ... Kodak EasyShare M863 Digital Camera

Canon 400d Hi, I was using my camera with a Canon speedlite 530 mk2 flash when it just died,(camera not flash) replaced battery, removed battery, recharged battry, tried the on/off switch, left it for a couple of days etc etc etc. The camera is basically............dead. Any ideas. Best regards John


Such symptom indicate a malfunction on the DC/DC voltage converter circuitry, and the camera has two of them located in different boards.\015\012\015\012In order to perform a correct diagnostics and repair of it, it is necessary to open s ... Canon EOS 400D / Rebel XTi Digital Camera

Hi my samsung s860 camera told me that i needed to replace the batteries and then it froze with the lens still out. do you know how to revive my camera without taking it in to be fixed? i tried new batteries but it still wont work


Try to turn on the camera and then push the playback button.. ... Samsung S860 Digital Camera

When switching on my Z3 camera, a 'system error' message is displayed and the camera switches itself off. I have tried replacing batteries, with no effect. Can you please advise if there is anything I can do to sort it myself? I can't see any reference to this in the manual. Regards, Jim Chesham


Hi Jim, just solved, I think the very same problem that you have with your Z3. I got the some of the solution on a similar web site. Here's what worked for me. I connected my Z3 to my PC in the normal way. When I turned it on it stayed o ... Konica Minolta DiMAGE Z3 Digital Camera

Camera Frozen When I turn on my DMC-FX07 none of the buttons work. The zoom doesn't work, the menu button doesn't work, the flash settings dont work. It won't switch from current picture when in viewing mode. I have tried all the picture wheel settings and every one is frozen. I have trie pushing and holding every button and removing and replacing and recharging the battery several times. When I replace the battery the autofocus works but then it freezes (when in heart mode) with the backli


Hi,I tried Option No.1 successfully when my Panasonic DMC-FZ7K froze once:Option No1:1. Try turning the camera on with the battery inserted.2. Now remove the battery while the camera is on. ... Panasonic DMC-FX07 Digital Camera

Camera jam Ricoh Caplio R5 - tried to switch it on to take a picture, and lens came out part way but the camera then switched off. Flat battery perhaps, so charged battery overnight and tried again with similar results. Lens still part way out, maybe some whirring noises, screen flashes but then camera switches off. Any ideas? Dead battery / broken charger? - or problem with camera? And how to check (I only have the one battery)


All the R series Ricohs have a pretty complicated lens system employing 2 swing-out lenses which can get stuck pretty easily, or worse, broken. If you are very good at taking things to bits you might have a go at fixing it (I've done several that wer ... Ricoh Caplio R5 Digital Camera

I dropped the camera this morning & now it wont turn on at all. I am just sick. Help! It fell on the top edge by the zoom button. When I picked it up, the side door (usb input etc.) was open. I tried to charge up the battery & that didnt work either. I called Lumix/Panasonic & they are helpless. They told me that I can send the camera in to be replaced for 175.00. I may as well just get a new camera.


... Panasonic Lumix DMC-TZ3 Digital Camera

My new Samsung WB650 camera has just frozen, whilst I was reviewing the various functions. It won't respond to any of the controls, and won't even switch off. If I remove and replace the battery it has no effect. If I then switch it on the 'on' light comes on, but it still wont respond or switch off. Can you let me know what has happened and if there is way to restore normal function?


Thank you TY Price. Solution no.1 worked for me....Really pleased ... Samsung WB650 Digital Camera

I have a Canon PowerSHot A510. It will not come on. I have replaced the batteries with new rechargeable batteries and it still wont come on. I have tried cleaning the battery terminals and no luck. The memory card is still okay because it works in another camera that I have. What do you think is wrong with it.


Have you checked the little switch for the battery door, along with the little plastic push-piece that closes the switch? ... Canon Digital Cameras

Battery compatibility battery is fully charged when it was replaced after charging the camera display says ' for use with compatible battery only' this is the original battery and has not been replaced with a sustitute.My husband has the same model camera and i have tried his battery but it still says the same thing, also i tried the battery from my camera and it works perfectly fine in his.


There's not much you can do about the problem because the problem is inside the camera. A faulty component is probably the cause. (I think its receiving more or less that the needed amount of power so that's the error with compatibility)If stil ... Sony Cyber-shot DSC-W55 Digital Camera

I have had this camera for a couple of years and I love it. However, recently, I was taking pictures and my battery went dead (I thought). So I bought new batteries and replaced the old ones. The camera will power on, but turn itself off immediately afterwards. Or it will power off after a few seconds. I tried replacing the batteries again, but no luck! Can someone help me figure this out? however I can veiw existing photogrhaps in camera but the very movement i try to take new photo camera got


Actually u are a victim of BAD CCD see this link belowhttp://www.imaging-resource.com/badccds.htmlbut good news is all brands are doing this free of charge repairs sony, fuji, canon , olympus all, some models have service adv ... Sony Cyber-Shot DSC-S40 Digital Camera

System error ya my digital camera coolpix 885 was just working fine,with no problems,then suddenly i tried zoom in and zoom out,took a picture,and the next moment i see all the images taken henceforth are blurred,tried everything clicking pictures with and without flash,zoom in and out and other things,it still does'nt work so i thought i ll switch it off n then restart and hell it gives an error message "system error". so as usual i removed my battery and replaced it back still it shows "syste


The following blog outlines some repair options for a lens error:\015\012\015\012http://camerarepair.blogspot.com/ ... Nikon Coolpix 3200 Digital Camera

Hi I have a 2year old kodak easyshare zoom digital camera V1253, When I press the on button the camera attempt's to come on but very quickly switches it's self off again, I have replaced the battery and fully charged it but it is still not working, Please advise if there's anything else I can try or where it would be best to take it to be mended. Many thanks Jo


This camera takes 2 size AA batteries, preferably the longest life batteries possible. I use re-chargeable batteries, and when they have about given up the camera does the same thing; prepares to open the lens and then switches off. I am confident t ... Digital Cameras

Canon Powershop A430 Digital Camera wont work with new batteries. I tried switching and used both alkaline and some regular ones but it keeps saying the batteries are low. How can I fix this?


Hi,If\015\012 the camera has a lens that extends when you power-on, it may have \015\012failed to park completely when power went off, due to the weak battery.Gently press on the front of the lens barrel to attempt to seat the lens. ... Canon PowerShot A430 Digital Camera

My S500 is now 7 years old and always functioned very well. Recently it no longer switched on even though batteries fully charged. Tried again a couple of weeks ago and it worked perfectly, a few days later no good again; then today switched on OK and working. Obviously I have an intemittent problem. Local camera repair quoted GBP 110 to repair but I can buy up to date replacement model for about GBP 125 which I may do. However I'd still like to repair my S5000. Have you any suggestions please


You have a leaky capacitor which gives you this intermittent problem\015\012All you can do is to replace the circuitry or have it done by a repairman\015\012the capacitor is built into the circuit board which is machine made since it is s ... Fuji FinePix S5000 Digital Camera

Unknown I dont now the specific part name, but the thing that extends out that also has the lense on it wont extend when i push power. All i can do is acess my pictures, but when i flip it to take a picture it wont extend out, and the camera turns itself off. I already tried replacing batteries. Could someone help me?


Easy just grab it pull and twist and pull it to full out and power it on and off ... Fuji FinePix E550 Digital Camera

Every time I try to turn my camera on the lens wont come out and it says lens error 111 0 0. I tried replacing the batteries but it didnt work.


Try these procedures. ... Kodak Easyshare C813 Digital Camera

Bought this camera about two years and since then have not taken a pic with it. IT wont come on. I have replaced batteries, and even tried powering on by connecting it to the pc. what else can i do to use this camera?


You really should take the camera to a specialised service. If you kept batteries in the camera this whole time, you probably have corrosion happening inside, that damaged the circuit board. In this case, probably the damage is so hi that it wo ... Insignia NSDSC7B09 NSDSC7P09 Digital Camera

System error ya my digital camera coolpix 885 was just working fine,with no problems,then suddenly i tried zoom in and zoom out,took a picture,and the next moment i see all the images taken henceforth are blurred,tried everything clicking pictures with and without flash,zoom in and out and other things,it still does'nt work so i thought i ll switch it off n then restart and hell it gives an error message "system error". so as usual i removed my battery and replaced it back still it shows "syste


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that you will have to get it fixed by a pro ... Nikon Coolpix 885 Digital Camera

I've just bought a new DSLR Olympus camera and fully charged the battery. The camera switches on when there is no memory card inserted but as soon as I insert a memory card the camera won't switch on. If I remove the card and try to switch the camera on it still won't turn on, I have to remove the battery, put it back in then switch on the camera. Any ideas what's wrong?


If this is a brand new camera, it's supposed to work with no problems. Take it back. ... Olympus Camedia C-350 Digital Camera

I have a JVC Everio HDD camcorder, model number gz-mg330rex which is approx 2 years old. The camera has had little use, been well looked after and carefully stored. Recently I went to use the camera using battery power and the camera would not switch on, so I tried the camera with the mains lead and it worked fine. I assumed there was a problem with the battery , so I bought a new battery from JVC. When I tried the new battery the camera would still not turn on. Do you have any ideas what could


Please check battery connector terminals in camcorder that might be clogged or corrosion on it. Clean it and try.If problem still remain, most probably internal fuse is blew off on main board of camcorder. Qualified camera tech is required to r ... JVC Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4368 seconds