Having problems with your Fuji FinePix S1000FD Digital Camera ?

My fujifilm finepix s1000 has the flash turned off and i cannot figure out how to get it turned back on


Answers :

Repair Help & Product Troubleshooting for Fuji FinePix S1000FD Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My fujifilm finepix s1000 has the flash turned off and i cannot figure out how to get it turned back on


... Fuji FinePix S1000FD Digital Camera

Flash I took the auto flash off the camera while on holiday to take pics of turtles and now cannot get it to turn back onto auto, please tell me how to do this


Hi - You can download the manual from the link underlined in blue below:PowerShot SX100See page 65: ... Canon PowerShot SX100 IS Digital Camera

Missing pictures I recently went on a trip and took some pictures that disappeared from my camera. Later I started getting the message 'Card cannot be read' so I purchased another memory card. I was taking pictures when I get the message 'Card cannot be read'. I turned it off and back on and the missing pictures were there. I then get the message 'Out of memory'. I turn the camera off and back on and the missing pictures are gone again. WHERE ARE THEY???


Hey flowernthe,\015\012 The error message “card cannot be read" means there was and error when the camera tried to access the memory card. To fix this you should make sure you are using the right kind of memory ... Nikon Coolpix 4600 Digital Camera

I cannot turn the flash back on. When I push on the lightning bolt button nothing happens, the display shows the flash turned off. Is something wrong with the camera. I have not had it that long and just use the IA mode and I know it worked before; can I reset the camera back to factory settings? I tried all the other modes and was able to use in in C1 but then I was messing around with that and now won't work in that either. Thank you for your help.


... Panasonic Lumix DMC-FZ28 Digital Camera

When camera gets turned on, the lens goes in and out of focus a few times and then screen turns blue and displays "D : 5f08 5e02" and does not go back to shooting pictures again. But for just looking at the pictures on the memory card, it works if turned on in that mode. If turned on in photo-shooting modes, it cannot be switched back to view photos. (OLYMPUS M700)


It's a sensor issue. The error indicates there is a problem on the lens.It may be caused by sand, broken gears or any other foreign object in the lens mechanism.A simple fix is to turn ON camera while holding it with\015\012the len ... Digital Cameras

How do i turn the flash back on in manual mode on my cybershot H7


... Sony Cyber-shot DSC-H10/B Digital Camera

When i turn my camera on, it seems fine, all buttons functional. When i take a photo, it flashes, but no photo will pop up in my screen. Instead the screen stays black, and then the battery starts to get really warm. then i cant turn it on or off, the only way to get the batter to stop heating up, is to take it out of the camera. i can put the battery back in, turn it on again, but it will say no pictures had been taken, and the problem continues every time i try and use it. There is no history


FREE INFORMATION REGARDING YOUR CAMERA FIRST \012\012The Stylus Tough-3000 can be submerged up to 10 feet underwater and incorporates four preset underwater scene modes as well as the ability to capture HD movies underwater. It can also w ... Olympus TOUGH3000 Digital Camera

I can not get y Jobo Photo GPS Geo-Imaging 2 to work with my Canon 550D. It seems no to get triggered by the hot shoe connection. I tried to chande the external flash settings, but that is not possible because: "the menu cannot be displayed. Incompatible flash or flash's power is turned off." What to do?


... Canon EOS 550D Rebel T2i Digital Camera

I can not get the auto flash to work The screen shows on the left: iso auto, a box, M1 on the right the flash symbol A, auto, steady hand symbol, 1375 I try to take a picture and the camera won't take unless I turn off the flash. I have tried to change many settings in the function area, but I can not figure out what I accidentally changed in the first place. please help me to get my camera to work in the auto mode again


I have this same exact problem. When you say "repair it," how? ... Canon PowerShot A720 IS Digital Camera

Hi, I've just recieved my nikon d90 back from a repair and service, and although everything appears to be working fine, whenever I want to change shooting modes,( auto, P, M, flash off etc), they only work once I have selected them, and then turned the camera off and back on. In other words I cannot be shooting in the Auto mode and then switch to "flash off auto"....all that happens is that the auto focus works but the shutter will not operate. If I switch the camera off and on however, I can t


I'm going to assume at this point that the camera has been serviced correctly. What I'd suggest is that you look in your manual and find where you can reset your camera back to the factory default settings. Okay here are a few thoughts that might be ... Nikon D90 Digital Camera with 18-105mm lens

Olympus tough TG-820 will not turn off. Clicks to power up and then turns off and on over and over. Cannot get it to stop unless I pull battery. But it starts back up when I put battery back in


... Olympus Digital Cameras

Fujifilm A330 My camera is doing something rather strange; it's always switched on by sliding the front shutter open all the way, and it's ceased turning on when I do that. My dad and I figured out that we can get it to turn on by holding the 'on' button in the back, but it won't get out of the menu/blue 'no image' LCD display for reviewing pictures. In the past, holding the 'on' button was what changed it from picture review mode to picture taking mode, and since everything has swapped around t


My switch was dirty... very dirty. I took my camera apart (NOT SUGGESTED FOR THOSE WHO DO NOT KNOW) and cleaned it which was NOT the easiest job. I would take it in to get it serviced if youw ant to play it safe. Take it apart only if you expect to n ... Fuji FinePix A330 Digital Camera

The flash is turned off and when I try to turn it on i get the message "Flash Settings Cannot be changed"


This is due to the flash capacitor inside the camera that is not getting fully charged from the battery, This compactor will need to be changed out. The capacitor is a $2.00 part and looks like this ... Sony Cyber-shot DSC-W80 Digital Camera

I have a cannon rebel xs EOS first I want to get it back to Factory settings how do I do that and secondly when I want to take a pic say at a concert without the flash they turn blurry but if I use the flash then it turns out great


In the setup menu, scroll to "reset" and follow the instructions. Second, when taking pictures at a concert without flash, you need either a tripod (probably not practical) or a monopod (that's what I use). Also, a camera with anti-shake control woul ... Digital Cameras

The flash when i take a picture it doesnt flash, it just happened out of nowhere the flash just stopped working and i've been trying to see if maybe i turned the flash off some how but i dont even see a link for the flash, how do i get the flash back on?


You could try pressing the right button next to the zoom button, but usually when this happens, it is because the flash unit or transformer has died.Bob ... Fuji FinePix A500 Digital Camera

E:91:01 My camera flashes E:91:01 and the flash has recently stopped working. The flash icon flashes continuously with the E:91:01 but you cannot change the flash settings at all, the up button is inactive. I've turned it on and off, the battery is fine.. Where can I go to get it fixed? Thank you! I have the same problem the flash not work will


I started poking all the settings in my Sony DSC-100,and the E:91:01error was on and the flash symbol started to flash.I called Sony no help.I went to the menu then setup.I went to camera one notch ... Sony Cyber-shot DSC-W35 Digital Camera

E:91:01 My camera flashes E:91:01 and the flash has recently stopped working. The flash icon flashes continuously with the E:91:01 but you cannot change the flash settings at all, the up button is inactive. I've turned it on and off, the battery is fine.. Where can I go to get it fixed? Thank you!


Easily just reset the camera with a pencil. ... Sony Cyber-shot DSC-T10 Digital Camera

My flash seems to be stuck in the "suppressed" mode. Also the Manual on page 64 refers to a "turn" of the "command dial" to the "flash mode setting". Since that item is not described anywhere else and the only turnable dial is the "mode" dial, I assume that it means to press the flash mode arrow. When I do that nothing happens. The flash modes do not display as described in the manual. I can't figure out how to get the flash to function properly again. I have made all my attempts with fre


Remove memory card and batteries, press and hold power button for 5 seconds, wait a few more minutes, put just the batteries back in and try it. Also make sure zoom and lens are not dirty and no debris on them. If so, use rubbing alcohol and cotton ... Fuji FinePix S1000FD Digital Camera

I cannot figure out how to turn off the flash on my canon sd450


You first need to change the operating mode to Manual. Then you can change the flash by pressing the right button a few times. ... Canon Powershot SD450 / IXUS 55 Digital Camera

When turning off my D90 I have on the control panel showing ISO 1.0 in parenthesis and the letter K to the upper right of the 1.0 this remains on when the camera is turned off. I have tried everything that has to do with this setting and cannot get it to go away when turned off. Pulling the battery is the only option so far even going back to default settings has no effect....help


I'm assuming it's actually on the lower right corner. It's supposed to stay on, even with the camera turned off. All it's doing is telling you that the memory card still has room for a thousand more pictures.The power drain is so minimal ... Nikon DSLR D90 Digital Camera

I HAVE A NIKON D40X.I CANNOT GET THE BUILT IN FLASH TO WORK.IT IS IN AUTO MODE AND FLASH IS TURNED ON.IF I ATATCH AN EXTERIA FLASH IT FIRES EVERY TIME.I HAVE TRIED IT ON ALL THE OTHER MODES,IT DID FIRE ONCE,TRIED IT AGAIN ON SAME SETTING NO LUCK.IT POPS UP ON DEMAND BUT NO FLASH.I THINK I MAY HAVE DONE SOMETHING IN MENU SETTINGS TO MESS IT UP AS I AM NO COMPUTER EXPERT.CAN YOU HELP. GOT A WEDDING IN MEXICO IN 4 DAYS.DAUGHTER IS EXPECTING GOOD PHOTOS.


In Auto mode the flash will only fire when the camera thinks it needs it.Only in the PASM modes do you get to decide whether to use the flash or not. ... Nikon Digital Cameras

My camera worked very recently, as I took pictures on a camping trip. However, a few days later after getting back, I've found that it refuses to turn on. If I turn it to either Video or Photo, the light turns green, but then immediately flashes red several times and shuts off. I've tried different batteries, with and without several SD cards, and nothing works... How do I fix it?


Here are the steps for the no power problem: 1. Make sure you will install a new or fully charged battery/batteries into your camera. Please use lithium batteries Ni-Mh or rechargeable Batteries (2000 M.Amp or higher). 2. Clean the battery contacts. ... Kodak EasyShare CX6200 Digital Camera

Cannot turn off picture protection feature on VPCS1070. I can get to screen that shows little key, but can't figure out how to turn it off. By the way, I'm 79 years old (Brownie Kodak age), so am not to computer savvy. The manual says just go o the protection screen and turn it off or on. I can't find where to do that.


Never mind - I finally fixed the problem. I just reformatted the Internal Memory and all is well. Thanks Anyway. ... Sanyo Digital Cameras

Turned it on. lens extended then it shut off but did not retract. Changed batteries, to be sure. But will not turn back on. get a single flash of green light next to sight lense above screen


... Canon PowerShot A520 Digital Camera

I have a Sanyo VPC-E760 digital camera that I bought used from a friend. Yesterday, I stupidly forgot to put the memory card back in the camera before I left for my son's first field trip. Now I have 12 pictures on the internal memory and cannot figure out how to get them onto my card-which is now back in the camera. I think I still have the old cords from my Kodak Easy Share camera that I lost, but I don't want to try them if that won't work. On my old Kodak, there was a setting where I could t


First ..choose a picture that ya know that is on the internal memory ..and see if it has options ...it usually has....there you will find option for move ..or transfer ..or so ...if it doesn't have ..you got to fins a suitable data cable ...and use t ... Sanyo VPC-E760 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3792 seconds