Having problems with your Fuji FinePix S3 Pro Digital Camera ?

When I switch the s3 pro on, FEE is displayed in the top LCD panel. What does this mean?

Answers :

Try setting the lens aperture to the minimum aperture.
\012OR: If you are using a flash, the flash needs to set to TTL, or the camera to either S, A or M.
Repair Help & Product Troubleshooting for Fuji FinePix S3 Pro Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

When I switch the s3 pro on, FEE is displayed in the top LCD panel. What does this mean?

Try setting the lens aperture to the minimum aperture. \012OR: If you are using a flash, the flash needs to set to TTL, or the camera to either S, A or M. ... Fuji FinePix S3 Pro Digital Camera

LCD screen turns purple in shooting mode. Photos can be taken. Most are Ok, some slightly out of focus or faded coloration. If switched to play back mode and then back top shooting mode, display is Ok for a short time then degrades from top center in a V shape to a purple line display.

This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free worldwide, and may also include free shipping both ways (free shipping varies with countries). This is regardless of your camera's warranty status. ... Canon PowerShot S410 / IXUS 430 Digital Camera

The camera when switched on displays in the top lcd display 'Err' yet shows battery as fully charged. ive reformatted my memory card via pc. changed the lithium cr 123a batteries for new ones. fully charged the 4 x AA batteries. the aperture ring lock is set to 22 on the 28mm-80mm af nikkor d lens. i have it set to af and auto but have tried all other camera setting i can access. it will focus no problem yet will not allow me to do anything else. i cannot access the menu eg func, play, in

Hi.Err means that the camera is in fault mode. There is no code, so that the fault is generic. This kind of error is often associated with shutter problems or other loens error. If you have a spare lens, remove battery and test the spare ... Fuji FinePix S1 Pro Digital Camera

When i try to take a picture with my Nikon D70, i get a flashing fEE in the top right hand corner of the meter display. I'm wondering what that means and how to fix it.

I know of three causes:-\015\012\015\0121. The first depends on what type of lens you are using. If you have a lens with a manual aperture setting ring, you need to turn this to its smallest aperture (biggest number) and then move the s ... Nikon D70 Body Only Digital Camera

I am looking to buy a olympus m9010 camera. When you switch on the camera the date and time settings appear. If i don't set it, it will appear every time i switch the camera on. So i wanted to know if i set the date, time, year settings will that display when i transfer to my pc and when printing or it displays only on my camera LCD. i have this doubt because whatever is displayed in lcd will be the same when you transfer to PC. Hence please clarify. It will be better if you answer to the modeln

... Olympus Digital Cameras

Hi, My pentax optio WP don't work anymore. When i switch it on, it stops after 5 seconds. If i start it in read mode (blue button pressed whil i switch it on), it works, but the menu button dont't work and displays a yellow lock on the top of the screen. If i switch it on with the menu btton pressed, it displays ver 1.00 before to stop after 5 seconds If i switch it on with the menu and the blue btton pressed, it displays ver 36, then xxx test xxx and v 866-76 , 1.0001 before to stop after 5 sec

Some of those buttons work in combination with the two dials (i.e., setting ISO and white balance, etc.). Hold a buttin down and user the knobs simoultaneously.If this is not the issue, please describe specifically which buttons are not workin. ... Pentax Digital Cameras

Firmware install on Pentax ist DS. Had Ver2.0 & everything worked fine. Simply wanted to upgrade to V2.02 to used SDHC cards. User Power AC and install ran approx 90 secs and displayed showed half way thru Phase 2/2 and then LCD went blank. No 'Complete' displayed. Now camera operates but no back LCD monitor display (top small LCD seems to work) and card seems not to read or write. Camera does release shutter but otherwise camera is not useable, Help!

You need to go to the support section of the Pentax website and engage in a live chat with a service tech using your computer or even a phone conversation to resolve your problem. ... Pentax *ist DS Digital Camera

The top (monochrome) LCD on our Nikon D80 recently broke. I think that it is actually called the "Control Panel," and displays settings, battery life, number of pictures remaining, etc. Please note that this is not the 2.5" color LCD on the rear of the camera. I know that it is merely the LCD because the backlight works, as does portions of the LCD display itself. Does anyone know of a guide or video to perform this repair? Also, does anyone know the part number? I plan to call Nikon tomor

Hi Jason. First of all, depending on the age of your camera and the warranty you purchased, this camera may be under warranty which would result in Nikon fixing it for free. \015\012\015\012Here is a free downloadable manual for your camera ... Nikon D80 Digital Camera with 18-135mm Lens

LCD' My A95 LCD is displaying a pinkish/purplish lineS which disappear on focusing. Afetr taking the picture and displaying it a slim purple line on the top of the LCD?

Its problem of bad CCD Imager Sensor in your Canon A95 camera and this part will be replaced.Canon has announced Free of Cost repair scheme for same fault in A95 models. Click ... Canon PowerShot A95 Digital Camera

Lcd display not working.nikon p500 went into watrefalls.. after putting it into ricebag for few days ( service center guy told it can t be done) after few days i could switch on camera , and could take pictures from view finder, lcd display seem to be not working.. any thing advisable to make work? can i go for new lcd, if so how much it would cost..

Yes you can replace it You must to do the decission replace LCD vs New camera. Call or go to NIKKON and ask them where is difference in cost Sometimes replace is cheaper that to buy. Other is better to buy that replace specially in USA.God bless ... Digital Cameras

LCD Display I haven't used my canon for a while - I've just turned it on and though the LCD display works to show pictures I've taken and the settings screen - I can't see anything in it when I take a picture (it's just black) when I press the Disp button it just switches from a black screen to the settings screen - please tell me what I can do so that I can see the image in the LCD before I take the picure. Thanks for your help

As far as I am aware, the 400D doesn't have a live preview mode.What you are describing is perfectly normal and is how 99% of digital SLR cameras behave.Are you sure it used to do this?Matt ... Canon EOS 400D / Rebel XTi Digital Camera

A95 LCD My A95 LCD is displaying a pinkish/purplish lineS which disappear on focusing. After taking the picture and displaying it a slim purple line on the top of the LCD?

Its problem of bad CCD Imager Sensor in your Canon A95 camera and this part will be replaced..Canon has announced Free of Cost repair scheme for same fault in A95 models.. Click Canon CCD Advisory to see details f ... Canon PowerShot A95 Digital Camera

The LCD screen only switches ON in C(Custom) Mode and tansfers to Viewfinder in other Modes.In display Images mode it regains to the LCD screen but as soon as the click button is pressed it again switches over to the Viewfinder I have tried with the Power Saving options and the Custom Settings with no fruuitful result. Please kindly help me in sorting out this problem

Try pushing the disp. or display button. I hope this helps! Please rate my answer. ... Canon PowerShot A570 IS Digital Camera

LCD Problems Hi, My Rebel XT's Top LCD screen and Display in the view finder isn't working properly. It displays random "symbols" but is identical in both. An example of this is the range finder will roll down but 3 notches will stay lit up ( 1 on one side 2 on the other. Do i need to send it to back to Canon?

Probably a canon repair situation ... Canon Rebel XT / EOS 350D Digital Camera

Gateway DC-40. I attempted to format a new 4GB compact flash card. I guess I must have done something wrong. I now have no monitor LCD display, the camera will respond to the on/off switch and the lens will extend. But, the camera will not respond to any of the other switches.In the LCD panel indicator display have an L in the upper lefthand corner and in the upper RH corner I have the auto flash and red eye reduction icons. I had installed the CF card the day before and everthing was fine excep

Hi,Remove the Card and see, if that would help the situation. Update the Firmware, if available.Let me know the progress, so we could proceed.Hope i helped you.Thanks for using ' Fixya ' and have a nice ... Gateway DC-M40 Digital Camera

No image on LCD screen, only irregular lines of varied coloring. When picture is snapped, it is of these lines--no image. Help. Details: I turned the camera to shooting mode but it does not display the image of what I want to shoot, but just a series of horizontal lines. If I take the shot, it shows the lines which were displayed on the LCD screen. If switched to playback mode, previously shot images show up fine. I checked the batteries; they were fine. I replaced them anyway, to no avai

I have the same problem and after doing research, I found this website. ... Canon PowerShot S1 IS Digital Camera

LCD Display part obscured Top third of display

This sounds like it might be a defective CCD imager, and is a known defect for your particular model camera.. If so, Canon should fix this for you for free if you live in the US, Canada, and a select few other countries. If you live outside the US, ... Canon PowerShot A80 Digital Camera

Different shutter speed on top lcd & viewfinder display

Even moving your eye away from the viewfinder can potentially change the amount of light entering the exposure meter, so even if the camera is on a tripod, if AE lock isn't on or manual mode selected, the exposure setting may change. ... Pentax *ist D Digital Camera

Lens -------------------------------------------------------------------------------- A friend has a Nikon 5700 (almost new) that has the following problem: When you press the shutter release, after the autofocus, the camera send the message "E r r" in the viewfinder display and in the top LCD display, and does not take the picture.beside it give on the monitor a message problem with lens does anybody have information about this problem? or do you have any idea where to ask about? Th

If it is almost new the thing to do is to reurn it to the vendor .\015\012Check out the situation with Nikon customer support. ... Nikon Coolpix 5700 Digital Camera

My Sanyo Xacti camera's LCD is powered on but not able to see the pictures in it due to whiteness of the srceen means just white blank screen. But I can take picture without focusing as not able to see through LCD display. I can See that picture in laptop. So please suggest me what is the problem and whre it can be resolved. Is there any Service station in India. Mumbai or any other City?

... Digital Cameras

My Sony DSC-p71 refuses to stay on. It switches on, but then switches off immediately. Only the led comes on, but the LCD display doesn't even have a chance to start. I'll be thankful for any help on this problem. Thanks!

The powersupply at bottom of camera is grounding itself out. flat rate if sent to sony around 150-180 i know that is as much as new one. hope that helps. ... Sony Cyber-Shot DSC-P71 Digital Camera

ZOOM ERROR An error message "ZOOM ERROR" is displayed when switched on . Their is an sound from the zoom gears . unable to Zoom in or Out. It was drop down from 3ft height. I think an error with the cambarrel, shutter.... Any solutions or the cost of this spares.???? Camera dropped and has a very slight dent near batteries. LCD displays 'Zoom error' and shuts down. Any help?

Did you take it apart to look at the mechanism? Definitely sounds like something is broken or out of place. \015\012\015\012KEH.com is a well known repair house that may be able to give you a good estimate. \015\012\015\012 ... Olympus SP-550 UZ Digital Camera

Lens Problem I just bought an Olympus C-8080. While switching the camera on there are some 4 to 5 light pixels on the display (lcd monitor on the back of the camera), even when directing the camera into the dark. It is not really a problem now, but do you also have this problem with your LCD monitor? What if they become more?

Dead pixels are a nightmare of every LCD screen. There is no way to avoid them - you can just hope they never happen to you. There is no pattern to how they appear and when, but the ones you have will stay for ever. If they bother you right now, send ... Olympus Camedia C-8080 Wide Zoom Digital Camera

Sony dsc-13 I have sony dsc-13 digital camera and suddenly after switching it on in picture mode and video mode the data(day nd time,flash....etc) appears on a black background on the lcd though the lens door is open and i can see my previouly stored pics in the camera lcd and also in my computer after connecting through usb.. so the problem is i take black pics and videos while the lens is open and the charger attached or on full battery,and the new taken pics displays black as well

Basically it is a Japanese Model from where u bought it u are lucky u can\015\012get it free of charge replacement just tell me which region u belong\015\012there is a known issue of CCD failure u will get free of charge repairs\015\012fo ... Sony Cyber-Shot DSC-T3 Digital Camera

I have a Sony DSC-F88 5.1MP camera... When you switch it on to any of the program modes - image dispalyed on LCD and photographed is distorted. Image is skewed with the edges of the image flaring with three colours to the edge. A kind of focus shift..low resolution image - sort of semi solarised picture. Any previous picture taken displays normal on the LCD... I have tried other memory sticks.. no change..

Your DSC-F88 has problem with CCD Imager and needs to be replaced. Good news is Sony will replace it free of cost. Click Sony Official ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1605 seconds