Having problems with your Fuji FinePix S5000 Digital Camera ?

Appear on and off automaticlly when turn camera on

\015 Please give some solution of this problem. when i turn my camera on its automaticlly turned off and than start automatically on and [email protected]\015

Answers :

Hi! I have a Fuji s5000 model, i'v had it for a number of years, and i had the same problem for a while, until i got it fixed and the problem was - the censor under the on and off switch was slightly worn down, so when you shifted the on switch, the censor would also twist, which eventually snaps it and you'll need a new one!
Repair Help & Product Troubleshooting for Fuji FinePix S5000 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Appear on and off automaticlly when turn camera on

Hi! I have a Fuji s5000 model, i'v had it for a number of years, and i had the same problem for a while, until i got it fixed and the problem was - the censor under the on and off switch was slightly worn down, so when you shifted the on switch, the ... Fuji FinePix S5000 Digital Camera

My Sony DSC-H50 Digital Camera has the following symptoms. When I turn it on, it appears as if it tries to move the lenses, but they do not move. A message appears on the screen turn the camera off an on again. This does not work. Removing the battery and then turning the camera back on does not work either. I tried initialize and reste the parameters to default, but that does not help either.I can view pictures that are stored on the camera

Http://www.sony.co.in/support/product/dsc-h50\015\012\015\012\015\012\015\012 ... Sony Cyber-shot DSC-H50 Digital Camera

My canon camera Ixus 8515 has an error when turning on (after some 'stuck' noises) that reads 'lens error, restart camera'. The lens is not retracting. The camera has not been dropped. Was working fine one minute, then camera appeared out of focus the next. When I turned camera off then on again, error appeared. Lens won't go back in. Have not tried forcing it as yet.

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you wi ... Canon Digital SD900 / IXUS 900 Ti Digital Camera

Digital cameras Having followed palmbeaches instructions re uploading photos from my canon A530 to my acer laptop, Ive had no joy. The computer doesnt appear to recognise the camera. I turned on the computer, plugged in the camera , turned it on and zip. The software is installed as it appears on startup with the other programmes. Am I beyond hope?

Ya nothing can be done now.Take the laptop to hospital. ... Digital Cameras

My Finepix s5700 will not turn on even with new batteries. I slide the turn on button and the green led lights, but then nothing else happens. If I push the preview button, the pictures appear and I can see them all, but if I try to start shooting, the camera turns off again and the screen remains black. If I try to switch between the shooting programs, nothing happens again. I have the camera for about 3 years and such problem appeared just a few weeks ago. Thank you in advance for your cooper

... Fuji FinePix S700 Digital Camera

Faulty d40x hi i bought a d40x off ebay the other day and couldnt wait to start snapping.... problems: - The error message "initialization error. Turn camera on and off again" appears. Upon turning the camera off and on again, the same message appears. After several times trying it still does not work. Also, the menu screen appears, and just keeps flicking from menu to menu constantly. As well as this, on the playback mode, the picture of the image displayed keeps zooming in as far as

I would start by looking at all of the push buttons on the camera. One may be stuck down. ... Nikon D40x Digital Camera

Upon turning on my camera the message 'lens error restart camera' appears against black screen. I've turned off the camera and have tried turning on again. Still same message. Prior to the above message, my camera displayed a message 'memory card error card locked' and I was not able to see view my photos. I took out the card to see if it was in a locked position to which it was not. Please help as I have vacation photos on this memory card!

Can't help with the camera- sounds like it has a fault.The photos, however, should be recoverable by putting the memory card into a card reader on a computer. ... Canon PowerShot SD1000 Digital Camera

Getting access I turn the camera on, then the word access appears on the screen, then it says to turn the camera off and on again. it keeps repeating this each time you turn the camera on. How do I get pass this and be able to use the camera???

Gently hold the lens when you first turn it on to prevent it from going back in the camera. That worked for me. ... Sony Cyber-shot DSC-W30 Digital Camera

When I turn on my Samsung NV3 camera, the shutter opens, a blurry image appears on the LCD screen and then it turns its self off. Although the camera appears to be off, if you press the button to view previous images, the blue power light on top comes back on, and the images can be viewed The battery is fully charged

Your problem may be due to weak/worn out batteries or corrosion on the battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowin ... Samsung NV3 Digital Camera

Error message When the camera is turned on 'access' appears on the screen. shortly after 'turn off and on again' appears and the camera beeps. However, when we do this the same keeps happening

My camera did the same thing, lens retracts 3 or 4 times, and then proceeded with an error message "turn off and on again". I pressed the power button probably about 10 times, didn't work, so then i gave it a good smack on the top of the frame a few ... Sony Cyber-shot DSC-W70 Digital Camera

Level Warning Whenever I turn on my camera (Digital Rebel 300D), my LCD monitor flashes this: "C bc". The manual tells me this means "Level Warning". What level is it referring to and how do I fix so that this no longer appears.  Now, when this message appears, I simply tap the "shoot" button and it goes away until next time I turn on my camera...

Battery level. charge it or replace it if it does not come up to full power state. the camera has a batter meter. refer to the manual and see if the battery is low. it requires you to push a few buttons while looking at the data window.not real ... Canon Digital Rebel / EOS-300D Digital Camera with EF-S 18-55mm Lens

Camera shutdown I've had my Canon Powershot A85 for around 2 years. Around a few dats ago, I was showing friends pictures from a holiday to America, when it appeared the batteries had run out, but the lens never retracted, which it usually would do. I attempted to turn the camera on again, and it turned on for a split second, but i never thought to look at the screen for an error mesage, but it just turned off again. Nothing was spilled on the camera, and it wasn't dropped, or any other

Sounds like the fuse went bad in the camera, If you have no power on camera most likely thats what happened, This has to be fixed by repair tec, they have to touble shoot power board. ... Canon PowerShot A85 Digital Camera

Lumix tz3 Please turn camera off and then on again" as soon as camera is switched on. I Can view any menu, or read SD card, but cannot take any pictures. If I turn on in a picture taking mode it starts to focus and then the message appears, when I turn it off the lens does not close. If I turn on in playback mode, it works fine, if I turn it off from playback mode, then the lens closes. Basically, any picture taking mode triggers the error message. Solution?

Low battery maybe? Try holding camera firmly in one hand, with camera on and in record mode, and strike in on its edge firmly on the heal of your other hand. This technique is often sucessful with temporary camer 'quirks' like freezing, lens not full ... Panasonic Lumix DMC-TZ3 Digital Camera

When camera is turned on screen shows no image and "No Image" appears, if a picture is taken screen is totally white, yet camera appears to function.

This is a processor fgailur - Canon Support will adive the best route for this ... Canon PowerShot SD600 Digital Camera

I have a small Panasonic Lumix DMC-TZ5 camera. After fully charging the battery I am all of then sudden getting this error message :"please turn camera off and then on again." When the camer is OFF the lens is extended and open. When I move the camera to ON the lens moves in to the closed position closes, then reopens, extends, tries to focus, is unable to and the error message appears "Please turn camera off and then on again" This cycle just repeats. The lens is able to extend it is not st

Hi,Checkout this tip about digital camera error messagesLens Errorfix for Digital Cameraheatman101 ... Panasonic Lumix DMC-FZ7 Digital Camera

Camera keeps loosing the time and date settings. When turning the camera on the lens does not open, then a screen asking to set the date and time settings appears - once date reset the camera works properly. Unfortunately this seems to happen almost everytime the camera is turned off.

The problem is the internal battery that powers the storage of time and date. If the camera is unused for a while, it will discharge. You must put a freshly charge battery into the camera and leave it with the power turned off for 24 hours to charge ... Sony Cyber-shot DSC-W170 Digital Camera

Hi there, I have panasonic lumix fx12, the camera was working fine till suddenly i saw this msg "please turn off the camera and turn it on again" when i turn it off the lens does not goes in and when i turn it on the lens goes it and comes out again but as soon as i press the capture button again the same msg appears on the screen and again the same story, I can hear a little noise from the lens for a few sec too! Could any body help me on this please!!!!!!!

Some say that this could be because the lens is out of alignment. See here: http://www.digitalcamera-hq.com/products/panasonic-lumix-fx12?dj=1&ratings=1 ... Panasonic Lumix DMC-FX12 Digital Camera

E-500 - Camera turns on, menu options available, press shutter button, cameras "appears" to turn off.

... Olympus EVOLT E-500 Digital Camera

Hi, I have a camera, a Sanyo VPC-T1060 and it's having some problems. It turns on, flashes, takes photos apparently, but the LCD screen won't work. It turns white when I turn it on and when I take a photo with flash black lines appear all in the photo. I've tried finding a reset button, but nothing has been found. As I said, it takes photos, but I need the LCD screen to take a photo so I can see if I messed up and should take more. I'm a photographer and I got this camera as a side kick to my DS

Try to remove the memory card if used, and blowing out the connectors in the camera cavity with compressed air (to remove dust if any).\015\012\015\012Make sure the contacts are clean. If necessary try another memory card.\015\012 ... Sanyo VPC-T1060 Digital Camera

When i turn on my fotocamera a message appears telling me to turn off the camera and turn on again..i do this but the message always appears..all functions of fotocamera are ok,but it doesn't take photoes..please help me

HelloThank you for using FIXYA!!!This\012 is a suggestion. If you do not feel comfortable trying it, you will ne ... Sony Cyber-shot DSC-W170 Digital Camera

THE CRASH OCCURRED when I hooked up the camera to my MAC AND the Easy Share program had iniitiated. The photos appeared on the screen and as I selected them to transfer the crash warning appeared. Symbols appeared, each with a number i.e. 100_0414_1.JPG. I taken a few photos yet each symbol indicated that it did not transfer. Also, when I attempted to turn off the camera the LCD screen continuously read that one photo was being transferred. This process continued for approximately 5 minute

Get a separate card reader and use it to transfer your pics to a folder you create on your desktop.\012 ... Kodak Easyshare C190 12MP Digital Camera with 5x Optical Zoom and 2.7-inch LCD

I have a canon powershot s5o, and the other day i turned it on,was going to take a photo and appeared E18. it turned off but the lense of the camera did not go inside the hole and cannot close it.. i try to turn it on and appears the first image,and immediately whites stripes on the blackground. and try again and the same. the lense is stuck there i cannot close the thing that covers the lense

... Canon PowerShot S50 Digital Camera

When I turn on my panasonic digital camera DMC-LZ7 (with fresh batteries) it attempts to focus but cant then displays a message saying "turn off camera and turn back on again". If i do this, the same problem appears

Looks like a problem with the CCD sensor. Try removing batteries, and SD card for 5 minutes. Replace new batteries and try again.If issue persists, you will have to get the piece serviced. ... Panasonic Digital Cameras

I have a Carl Zeiss Optical 3x Sony Cybershot. When I flip it open to turn it on, the image is either moving with horizontal lines, or blurred vertically (image looks like it's melting). The photo images come out as they appear on the camera screen. Sometimes the image will appear clear and normal on the camera screen when I flip it open. The camera hasn't been in intense heat or cold.

Hi,It seems some thing thing wrong with CCD Imager or its connections with main board of camera.Let me know exact model number of Sony camera as it would be written at bottom, to provide you solution. Also let me know are you ready to apa ... Digital Cameras

New batteries just put in. camera turns to black screen after i take a picture, even with memory card in. screen turns black, camera appears to be turned off, but lens does not retract.

It may be something more serious, or your new batteries may be defective, but the problem you describe is\015\012frequently due to corrosion on the battery contacts inside the camera. \015\012Remove the batteries and wipe the camera contacts firmly w ... Kodak EasyShare CX6445 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3388 seconds