Having problems with your Fuji FinePix S5700 Digital Camera ?
Card not initialized message after i'd used it this morning
\015 Used camera 60 fotos go to use it again message card not initialized what do i do? Urgent need camera tommorrow\015\012David Barron\015\[email protected]\015
What size is the SD card?
Repair Help & Product Troubleshooting for Fuji FinePix S5700 Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Card not initialized message after i'd used it this morning
What size is the SD card? ... Fuji FinePix S5700 Digital Camera
I'm new to this pro camera world. After using a card reader (usb) with my laptop I put the card back in the camera and now I am getting this message on my screen, "Card not initialized". Why and did I do something wrong? It's a Fuji FinePix S2 Pro, please help I just starting using and hate that this has happened! Thanks, Kristie
Sounds like you didn't use the "safely remove hardware" function when you pulled out the card reader. If there are pictures on the card you want to save, use the card reader again and download them to your computer. Then, put the card in your camera ... Digital Cameras
Memory card I HAVE AN S602 FINEPIX FUGI CAMERA, AND BOUGHT AN 8-GIG MICRO MEMORY CARD. THE MESSAGE I RECIEVED WAS THAT IT WAS NOT INITIATED. SO I TRIED TO FORMAT IT, BUT RECIEVED AN ERROR MESSAGE. IS IT POSSIBLE TO USE THE 8-GIG MEMORY CARD IN MY CAMERA? YOUR HELP IS MUCH APPRECIATED. THANKS. BILL
Because this camera only understads FAT16 formatting, it does not accept any card larger than 2GB so your best bet is to use the current crop of standard 2GB CF cards, most newer ones (usually 16X and faster) are alsa fast enough for continuous VGA v ... Fuji FinePix S602 Zoom Digital Camera
Hi, I got a new ProSpec 4gb flash card and used it last night in my canon 40d. I forgot to format before I initially used it. Shot lots of great images that I could see on the camera back, but now I am getting the messages - can not create a folder, tried to shoot another image and is says cf card is full, and now I can't review on camera, it says there are no images. Tried Digital Photo recovery software and got nothing. Anything at all I can do? I'm tempted to format now and then see if I can
I do not have a solution, but I do have same problem, or a variation of it: filled my ProSpec 2GB, removed it from my Canon G10 to insert a fresh card, then later reinserted the ProSpec to transfer photos to computer. Several tries, and no go. First ... Canon Digital Cameras
I was able to download pictures using a SHG 18 in 1 Reader/Writer. But then when I put the card Dx 1 Mb back in the camera and turned it on, I get the message "Card not initialized" but I can't format it in camera and I can't format it when I put it back in the reader. I'm a novice who was given this camera for Christmas. I could be doing something wrong that is simple to fix.
The message is trying to tell you that you need to format the card. The\015\012owners manual will have "how to format" information for your camera.If you cannot format the card it could be the card or the camera. The only way to know for ... Digital Cameras
My Canon Powershot SD450 won't turn on. I haven't used it in a while but the battery is charged and nothing that I know has happened to it. Help. My Canon PowerShot SD 750 won't turn on anymore. Battery is fully charged, was using it this morning until the memory card was full. Took it home, downloaded the pics to the PC, disconnected from the PC and received a 'Battery Pack' message. So, I charged the battery and now nothing. Is it just broke?
Here are some simple things to try first for a camera that won't power on. They won't work for every case, but they're worth a try:\015\012 ... Canon PowerShot SD750 / IXUS 75 Digital Camera
I am trying to use my Olympus D-460 after not using it for ~ 4 years. I downloaded the pictures from the 16 MB card using my laptop with a card reader. I then emptied the card. When I pull back the lens cover, the lens comes out but then i get an error message that the card is full. I followed the directions for formatting the card but still get a message that the card is full even though it also gives me a no picture message. i copied some of the original pictures back on to the card and can v
Glad to hear you're back in business! ... Olympus D-460 Zoom Digital Camera
I am attempting to use "Eye-Fi" connect /x2 with my canon 5d. Since my camera accepts CF cards I am using the SDHC EYE-FI card in a SD/SDHC CF ADAPTER. (SDCF-01). When I insert the SDGC Eye-Fi card into the adapter and load ithem into my 5D, the camera first seems not to be reading the card and then gives message, "Card not formatted". When I attempt to format the card in my 5D, I get the message "Cannot format card". I formatted the card in my computer and again tried to use it but the messa
... Canon EOS 40D Digital Camera
I attempted to unlock a 1.0 gb camera card today which has been locked. After attempting to unlock it using a utility knife (since the lever was missing) I gave up after trying to load and reload the locked card. Then when I reinstalled the other card (same type which was unlocked and in use today. This card now is unusable with the same message showing on the camera screen. Yet another card that is also unlocked was used and the same message again. I now cannot shoot photos since all three card
Hi there.Turn the camera on and go into the setup menu, look down the list for "reset" and reset it, then try another camera card.Please post back the results.Good luck and thanks for choosing FixYa!! ... Canon Digital Cameras
Hi. Last time I went to used my camera the screen showed a message saying the memory card was damaged. When I tok it out I saw that it was slightly damaged on the bottom strip. I have replaced it with another memory card but the same message keeps coming up so I cannot take any photos.The message says: "This memory card cannot be used. Card may be damaged. Insert another card." Any suggestions how I can reset the camera before I pay to put it in for a service?
It is possible that there are bits of the damaged pieces struck inside the card reader contacts in the camera.\012So if you can remove the battery and memory card and tap upside down ,you might be able to retrieve the broken pieces.\012us ... Nikon D40x Digital Camera
ERROR MESSAGE ''cannot record movies on this card initialize only using the camcorder'' on cannon vixia hf100
It wants you to format the card in the camera. This will erase it so download any pics first. ... Digital Cameras
I have a Nikon E5400, ver 1.3. I bought a 4GB Kingston CF card; the package said "formatted and ready to use". On inserting into camera, the message flashed that the card is not formatted. So I proceeded to format. The next message that flashes is "Out of Memory". Questions: 1) is the CF card defective? 2) is E5400 incapable of reading a 4GB CF card, should we use only CF cards <1GB? 3) Will a firmware version upgrade to v1.4 help? 4) Any other reason why this could happen?
It cannot use a card larger than 2GB. Format the card in the camera. Insert it into a card reader and change the partition side to slightly under 2GB. The problem is FAT16 does not support more than 64K sectors of size 32K. ... Nikon Coolpix 5400 Digital Camera
When putting a Lexar Multi-Use 16 GB SDHC memory card in my Canon Powershot A540 I get Memory Card Error message as well Card Locked message. Have tried unlocking it by the slide on side of card, is t
It's a lost cause. The A540 works with SD cards. While SDHC cards will fit into the slot, they are electronically incompatible and will not work in devices not designed for them. You need to stay with SD cards, 2GB and smaller. ... Canon PowerShot A540 Digital Camera
My Nikon digital camera model E7600 displays "This card cannot be used". I haved taken pictures and used this card with no problem. This card was not removed from the camera and was working fine when this message came on the screen.I tryed a new card and got the same message. What must I do to make the camera work properly?
I think there is some problem with your cameras memory card slot. this can be also due to the card lock status that is not getting back to the normal state. do you lock card sometimes while using it to prevent accidental delet ... Nikon Digital Cameras
I get message, memory card needs formatting, followed instructions and the same message comes up again. It worked fine until I used my camera for a video and it has not worked since, except when I take to card out and use internal memory, Camera CX7430 - card Emtec SD Card - hope you can help. Lori
I have 5 of those cameras and I've never been able to use a memory card bigger than 2 GB. The 4 GB gave me the same message so I don't even try anymore. ... Kodak EasyShare CX7430 Digital Camera
I accidentally used a damaged SD card on my Kodak P712, so it flashed that "error" message. but after that every SD card i used, whether my own or new, it always flash that "error" message now. I't can't read any card and it just stuck on that error screen unless i remove the card
The problem is that your camera will only read SD cards, not SDHC cards. After you damaged the SD card that you've been using for years, you bought a replacement, not noticing that it was SDHC. The new cards don't work, not because they or the camera ... Kodak EasyShare P712 Digital Camera
Message "Card not initialized"
Make sure the camera is in teh taking picture mode...then click the MENU button...scroll all the way down to SET (SET-UP)....click right arrow to select...then scroll down to FORMAT...click the right arrow...it will say, "FORAMT OK? / ERASE ALL DATA" ... Fuji FinePix S5200 / S5600 Digital Camera
Getting message "this card cannot be used", but it is a card I have used before. I get the same message with all of the cards I have.
Hi,I love this error as it has created a Havoc. Search and you would find hundreds of unsatisfied customer's. This is a repair error code. Card is fine. This is a common problem in this model. Unfortunately, no lawsuit. Anyway ... Nikon D70s Digital Camera
Coolpixl1 message ( cannot use this card )i have used it before now it cant be used why the card that came with the camera gives the same message
... Nikon Coolpix L1 Digital Camera
JUST USED MY CANON 950IS FOR THE FIRST TIME USING A SANDISK ULTRA II SDHC 4GB CARD. DOWNLOADED FIRST PICTURES ONTO LAPTOP USING THE MICROMATE WHICH CAME WITH MEMORY CARD. WHEN I'VE PUT THE CARD BACK IN THE CAMERA, A MESSAGE COMES UP ON SOME OF THE IMAGES 'INCOMPATIBLE JPEG'! THE IMAGES ARE STILL THERE ON THE CARD BUT THE CAMERA DOES NOT SEEM TO WANT TO READ AOME OF THEM. IS THIS A CARD OR CAMERA PROBLE ??
Sounds like a card problem. Did you format the card in the camera when you first got it? If not, recommend formatting it using the camera. Look for the format option in the camera's menus. Note that this will also erase all images from the card, ... Canon Digital Cameras
Neither the fujifilm 256MB xd card nor th enew Olympus 2GB xd card will work in the A340. I've put the card in and went to Format it in the camera as per teh menu. It acts like it does but when you take a picture it says "write error" When you turn it on again it still says "card not initialized." I've tried formating them with the camera on (lens cover open) and using the menu and with the camera off (lens cover closed powered on using the button on the back) and using the menu from that screen
The camera needs to be up-dated to read the cards it may still have the old dater in it! so it cant "see" the biger cards ... Fuji FinePix A340 Digital Camera
I have a Pentax K 100 D. I have tried using a Flash Memory card (a Sandisk Ultra 16GB) but without success. The message 'Memory Card Error" is displayed even before I could format it. The card had previously been used to store files from my PC (where it worked perfectly) but the camera could not format it even after I had removed all the files etc by reformatting it in the PC (FAT32). Is there any way I can get to use this flash card in my camera?
Hi Doc.SD cards different in size use different technology. there are design changes introduced at 2GB and 4GB that makes cameras not compatible with all cards.When this camera was introduced, it was compatible with cards up ... Pentax Digital Cameras
Hi. I have a Premier Digital Still camera who does not recognize the card , I got the camera without the card, so I bought an SD card and I entered. camera is not new. when I opened apear the message, "this card can not be used". I tried to format my card. mention that the card works in another camera canon. so the problem would not have the card. I can not find anywhere the option of formatting the device menu. please give me some advice. Thanks. please excuse my mistakes. I used google trans
The problem is that your camera is only compatible with SD cards, not\015\012SDHC cards. You bought a larger card for your older camera, not\015\012noticing that it was SDHC (or not knowing that it mattered). The new\015\012card doesn't work, not bec ... Premier Electronics DC3A30 Digital Camera
Camera message is: memory card requires formatting : I chose the option to format and camera will start formatting then stops and this message pops up:please format memory card or put in new memory card. I changed memory card and same thing happens,I have also tried moving switch on card, This problem started when I used card to transfer pictures to computer.
Try formatting through the computer rather than from within the camera itself. Or, just open the card on the computer, select all, then delete. There's probably a large file in there somewhere that the camera just doesn't have enough ooomphh to move ... Digital Cameras
I have about 24 pictures on my XD card and I was trying to .rar them in one file on my PC but it was not working and so I ejected the XD card from the PC reader slot. When I put the XD card back in my camera, the message came up 'card needs to be initialized' (or similar words). I notice that to Initialize, it would erase all the files on the card which I do not want to do. Obviously, something has affected the formatting of the XD card whilst I was trying to zip the pictures. Is there some S/W
You should try some photo recovery software to rescue the files on your XD card, here are some for your options. ... Fuji Finepix F31FD Digital Camera