Having problems with your Fuji FinePix S7000 Digital Camera ?

Fuji camera S7000 saying CArd not initialized or card error! we've changed through 7 memory cards all that work great on other cameras!! Is the problem from the camera?


Answers :

Card reader of the camera must be defective,get it service3d
Repair Help & Product Troubleshooting for Fuji FinePix S7000 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Media selection With both compact flash and xd memory cards installed at the same time, xd card works fine when selected, however, when selecting compact flash, camera will not take a picture and eventually says their is a write error. compact flash works fine on it's own. Does anyone else have this problem, mind you, it's only a small problem, the camera is really great. Stretch.


Have you tried using a different brand? ... Fuji Finepix S9600 Digital Camera

I've had the camera for about 4 years. It was sent it for the recall and worked great for a little while. Now the new problem is that it doesn't recognize the memory card.. ANY memory card. I have to keep taking it out and resetting the camera. this happens after every picture.


There is the possibility that the fingers in the camera that contact the memory card are slightly dirty or corroded. You can spray some electrical contact cleaner or be careful with a qtip and alcohol to try to clean them. The other possibility ... Sony Cyber-Shot DSC-F717 Digital Camera

Fuji camera S7000 saying CArd not initialized or card error! we've changed through 7 memory cards all that work great on other cameras!! Is the problem from the camera?


Card reader of the camera must be defective,get it service3d ... Fuji FinePix S7000 Digital Camera

Pentax A10 Have a three month Pentax A10 digial camera, with no previous problems. It now cannot read the SD memory card and won't take pics when the memory card is in the camera. This memory card will work in other cameras. Able to take a photo when the memory card is out of camera. Tried a different memory card - same problem. This happened after I took the card in to Walgreens to get some prints made. Can taking the card out of the camera and putting it back in damage the part of the camera t


Try another card in your camera but check the inside the card holder that you have not got a damaged connector in there. and format the card with the camera and not on pc. Hope that help you.jam ... Pentax Optio A10 Digital Camera

My Lumix DMC FZ30 use to work using a 4gb SDHC SanDisk card, but now says, "Memory card error please check the card". However, the card works fine in any other cameras. A small pocket Fujifilm camera for example. I was told to reformat the card in the camera, but I'm unable to use any part of the FZ30 camera while the card is inserted and on. Please help as I want to use my 4gb card and not just the 2gb ones which work fine so I know it's not a problem with the camera reading memory cards, just


Memory cards have a limited life. If you've been using it a lot and erasing it or formatting it, it probably is just worn out. Take it to a camera shop and try a new card. If that works, go to a discount store and buy a new one. It will cost less ... Panasonic Lumix DMC-FZ30 Digital Camera

Hi.....i am havimng a problem with my memory card PNY Optima SDHC 8 gb class 4......i have been using it in my sony camera....its was working fine at the start but recently after when i inserted the memory card in my camera it say "system error" or "error formating memory card".....i tried other memory cards in my camera and it worked..so i thought to formating my card using my camera usb cable but when i inserted the cable to my pc it says your disk is in read only format and make sure its ch


You will most likely find that your camera will work with cards up to a certain capacity e.g. 2gband not with cards of higher capacity. What this means in effect is that high capacity cards are not compatible with your camera. It would be inter ... Digital Cameras

When I turn the camera on I get the message "memory card error". The only button on the camera which then works is the menu button but it just brings up the screen and then the same error message. Yes, I have replaced the memory card and the first memory card works in our other camera so it is not a problem with the card. My computer also fails to recognise the camera when I connect it via the usb port. Any bright ideas?


You need to format the card in the camera. Go into the menu and scroll to "format" and follow the on-screen instructions. This will erase and initialize the card . To download pictures, the most trouble-free way is to use a card reader and download t ... Pentax Optio S4i Digital Camera

Why does my Kodak P880 Digital Camera keeps locking my memory card but the memory card is not on lock position? I have access to two of the same camera and both have the same problem. Is this a defect on the camera? I tried formating the card and it works but it keeps locking the card. I even change to a new memory card and the problem still exist. Please advice.


What type of memory card do you use? Do remember it supports only SD cards up to 2 Gb (uses FAT 16 FS)Hope this helps.Gr. Blackbear ... Kodak EasyShare P880 Digital Camera

Memory card I got this camera for my birthday and my mom bought two memory cards. The one I'm  having problems with is a Digital Media 512MB secure digital. I've used it alot and have had no problems until now. It says "unrecognized file format" when I put the card in....and now I can't unload them from the card to my computer. So I pushed menu and went to format and clicked memory card and I decided to erase everything to have my memory card working and it STILL DOESN'T WORK! Imagine that! I'm


You need to reformat the memory card. \015\012\015\0122 ways you can do it...- you can do it in a card reader...(right click the card reader icon at your PC and select Format)- or you can use a 3rd party shareware ... Kodak EasyShare Z612 Digital Camera

I bought this camera off of an realestate agent, she said it wasnt very old and that it worked great, it didnt have a memory card in it she said i would haft to get one. I have gotten 3 differnt ones and they all say it cant be read. I talked to a walmart associate and she thought I needed a 1 gb memory card for that camera so I got one off line and it still does the same thing. I put the same memory card in another camera and it works just fine. I have this nice camera and I cant even use it


Your camera is only supporting: SD/MMC up to 1 Gigabyte\015\012The card that you currently have might be high speed HHC. All should be sorted if you change the SD card to the supported MMC SD card. ... Kodak EASYSHARE CW330 Digital Camera

I have a new Canon A3300 IS and a new SanDisk SDHC 4 GB memory card. It's worked fine for a few days, and now suddenly, I get a "Memory card error" message, and the camera won't work. I tried reformatting the memory card, but the camera refuses to do it. What happened? I assume I need a new memory card, but I'm afraid that the problem will occur again.


Insert the card into a card reader and format it on the computer. See if that works. Format using FAT32 as its more reliable than the FAT it uses by default. If the camera supports FAT32 you can expect it to last atleast a year before you need to for ... Canon A3300 IS Digital Camera

My Verbatim 32 GB SD Memory Card wont work on my camera. It keeps tellin me me to please reinsert the memory card. But my camera works with my other memory cards. Can you tell me what might be the problem and how to get it working again?


Without knowing what make or model of your camera I can't research its memory capacity. A 32GB SD card is a massive amount of memory for most if not all point and shoot cameras one problem may be that your camera doesn't have the firmware to support ... Digital Cameras

My sandisk sd card isn't working in my camera. My camera is a vivitar 5024 camera, everytime I try to take a picture it says memory card is not ready, it says switch to internel ram. This memory card is brand new so what is the problem? No it is not locked i've tried that already, i've tried to figure out what's wrong for a long time now. Does anyone know how to fix this problem? Additional information: The sd card is only 2GB.


Have you tried to format the card.\015\012\015\0121. \015\012Start up a computer with Windows XP, Vista, windows 7or Insert the SD card into an external memory card reader or into the computer's built in card reader. If i ... Vivitar ViviCam 5024 Digital Camera

The camera accepts a memory card of 256 MB but rejects a new memory card of 4 GB, initially I thought it was a card problem so exchanged the card for a new one of the same capacity but still the same problem - could it be that the camera is not capable of working with a high capacity card.


Your camera can only use standard SD cards up to 2GB capacity, and even then they must be formatted to FAT16 and not the usual FAT32 used on most pcs these days. Standard SD cards actually go up to 4GB and your camera would accept those with a suitab ... Panasonic Lumix DMC-FX8 Digital Camera

Memory cards hello . I bought two 4 g memory cards and when i install them in the camera i get an error message that sayus that there is a problem whith the card or that it is protected and cant take pictures. tried them at the shoping center on another camera and one works but the other one doesent but both still dont work in mine...???


Maybe the 2 card is lock try to take your card from camera and slide the small button at the right side of you memory card to unlock. ... Canon PowerShot A530 Digital Camera

Optio E10 When I turn my camera on I get an error message that says "memory card error", I purchased a new memory card but still get the same error message...any suggestions? I have the exact same problem with my Pentax Optio S7. I turn on the camera and it displays the message Memory Card Error. I have tried several new cards and get the same message. There is an option on the menu to format a card, but you can't access the menu if you have the card installed. It takes great pictures without t


HelloOK, if the memory card itself is locked, you might \012sometimes get this error code. All you need to do is to take out the \012memory card and switch the lever on the left side to the unlock. ... Pentax Optio S7 Digital Camera

How to format an SD card on a Canon SD600 camera when the menu says "memory card locked." The memory card is in the unlocked position. When we put the SD card in another Canon camera (SD780 IS), it works fine, and will store a photo. It appears that something in the SD 600 camera itself is preventing the card from functioning. Can you offer a solution to this problem?


Could be that you have the wrong memory card.\012SD600 will only work with the old SD cards, but the SD780 will take the SDHC cards.SDHC was intended to give 4gb or more of storage, while the old SD started as 16 mb.  Different camer ... Canon PowerShot SD600 Digital Camera

I bought a 4GB Memory Card for my Samsung Digimax D53. I put it the camera and Try to format it, but it says CHECK SD CARD. I tried another 1GB memory card and it worked. I know that the problem is with my 4GB memory card. what can i do to to get it work?


Your problem is that your camera only takes standard SD cards up to a maximum of 2GB. The c ... Samsung Digimax D53 Digital Camera

I bought a 4GB Memory Card for my Samsung Digimax D53. I put it the camera and Try to format it but it says check sd card. I tried another 1GB memory card and it worked. I know that the problem is with my 4GB memory card. What can i do to to get it work?


Unfortunately, you can't. The D53 works with MMC and SD cards. Your 4GB card is actually an SDHC card. While it fits into the slot, it is electronically incompatible and will not work. Since this is a hardware issue, it is not something that can be c ... Samsung Digimax D53 Digital Camera

Videos play on camera, not on computer. Why? How to fix? I took SD memory card out of camera, plugged into computer, copied direct to computer. The video files never play. the Intelli software required to transfer and convert video files to make them work properly? I changed form Windows XP computer to a new Windows 8 computer. Also, a separate issue on another SD memory card, copying SD memory card to computer, many files not recognizable, can't locate. Might be problem with that SD card. This


... Samsung PL200 Digital Camera

When I put my memory card in my camera it says Err Cf and won't let me take pictures and won't show any of my previous pictures on the card on the screen on the camera. When I put the cf card in my card reader and plug it into my computer, nothing happens. The computer doesn't register the card at all and I tried putting a different memory card in the reader and it worked so it definitely isn't the card reader that is the problem. I don't care if the card is broken but I have a bunch of picture


Hi There.It sounds to me from what you described that the card has gone. Unfortunately , with volatile memory such as flash drives or memory cards a recovery is usually not possible as the chip where the data is stores is destroyed. ... Canon Rebel XT / EOS 350D Digital Camera

System Error My camera was working great- no problems. Then it said "this memory card cannot be used" 1 time and then displayed "system error" in red with screen black - no function! Any suggestions?


Try taking out the memory chip and check to see if the camera still comes up and can take photo's off of the internal memory chip. If you still have the same issue. take out the batteries for about 15 min to allow all of the compasitors to discharge. ... Nikon Coolpix 4800 Digital Camera

I have a Kodak easyshare m320 which I recieved today. I bought an SD card to go with it because the internal memory is really small. Near the card port, it says it accepts SD cards, and it also says this on the manual, but the card I bought for it is not being read by the camera. I can put the card in my computer and it works fine, though, so I don't know what the problem is. Do I need to do something to my camera in order to make it use the card rather than internal memory?


First, with no card in the camera, go into the menu and find "format"...follow the on-screen instructions to erase the internal memory. Then, insert the card and do the "format" thing again to optimize the card for the camera. Now, it should work pro ... Kodak EasyShare CX7430 Digital Camera

Purchased camera in March and working great until yesterday. Took a batch of pictures yesterday but was not able to download most of them to my computer. Got computer message "there are no images in the camera or memory card that match download conditions". Also couldn't download on a second computer. All pictures display on the camera playback feature. Put memory card into a Canon digital and they display and was able to download all photos using Canon. Deleted card and took new sample photo


Sounds like you're switching the same card between cameras. Rule #1...one card per camera. Format the card in the camera it is to be used in. There is no Rule #2. ... Panasonic Lumix DMC-FZ28 Digital Camera

My Olympus FE-230 has a problem. when i turn it on with a memory card, it shows me two options: reset card or turn off camera. I've done both and it still doesn't work. it is working only with the internal memory (20 Mb's). what can I do? I've also bought a new card but it still doesn't work.


If you have pics on the internal memory, you must get rid of them first. With no card in the camera, go into the menu and find "format"...follow the on-screen instructions. Then, do the same thing with the new card in the camera. ... Olympus FE-230 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4537 seconds