Having problems with your Fuji FinePix S7000 Digital Camera ?

Using external flash

\015 How do I set the camera up to use an external flash - I'm obviously not looking in the right part of the manual.\015\012Thanks.\015

Answers :

Yuo can use external flash in P, S, A and M mode.
\015\012To activate the externale flash mode, press Menu/OK and use > to cycle through the different options. Switch External Flash to On. Press OK.
Repair Help & Product Troubleshooting for Fuji FinePix S7000 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Canon EOS 40D camera. We are having problems with using an external flash. The pictures always come out extremely dark with the external flash. The flash seems to work fine, it flashes brightly. The pictures look fine using the built in flash. The flash is a Promaster but we tried a Canon flash and it did the same thing. The camera store we bought the camera and the flash from says it looks like a synchronization issue and that it is a hardware problem with the boot. Their sugges


I don't know if this will help and this post is two months old. The \015\012camera store may be right that the synchronization is the issue which \015\012tends me to point a finger at the external flash. There are at least \015\012three different fla ... Canon EOS 40D Digital Camera

I bought my new canon eos 60D..i put on external flsah to use..then after i take off the external flash, my camera's built in flash cannot pop up to take flash even i had press the flash button. How?


Hi, What external flash did you use on your Canon 60D? The internal flash will not automatically pop up if in the "Creative Zone" it will pop up with the button in the creative zones (M, AV, TV and P) it will not pop up with the button if you are in ... Canon EOS 60D Digital Camera

Canon T3i thinks that there is an external flash attached and will not allow use of the built in pop up flash. I have tried putting on the external flash and turning it off while it is on the camera and literally every combination of the sort to try and see if I can get the camera to realize that the flash is no longer there. Please help....


There is a pin in the hot shoe that operates the external flash switch on the bottom of the top cover. It is probably stuck down - maybe by sticky liquid spillage. Clean with a toothbrush and windex and see if it will then pop up. ... Canon EOS 600D Rebel T3i Digital Camera

Have a Canon 40D. After using a external flash, the internal flash is not popping up. It still thinks the external flash is there. What do I do to reset this?


The little pin on the hotshoe can stick if you use an extenal flash, just poke it with a screw driver to free it ... Canon EOS 40D Digital Camera

I bought a Sunpak 383 external flash. When I put it in the hot shoe, the menu in my camera doesn't allow me to access the external flash options. I don't understand how to use the flash


Sunpak 383 is not a 'dedicated' flash that is why it don't give any information to the camera.However set the camera in manual mode and set the aperture and shutter speeds and match the iso of both and it will work like a champion. ... Digital Cameras

I am using an Olympus E-500. and am trying to use the built in flash, set to one eight or to one sixty fourth of normal output, to trigger an external flash unit. The camera is set to "Vivid", manual, auto focus, and iso 100. From the "manual flash" menu I should be able to select either full, 1/4. 1/16 or 1/64 of the output. However, those choices never light up. I keep cycling through the first two lines of the menu and never reach the third line with the light output options I want. P


You should consult a Professional Photographer / Cameraman or contact the Customer Care of the Company. ... Digital Cameras

Flash Problem Rebel XT flash icon shows next to "busy" in the view finder when I press the shutter button. If I attempt to take the photo the flash does not work. If I continue to hold the shutter half way down, then release it I get Err 99. I am using genuine Canon lens' and have tried all three. I also connected my 420EX external flash and it also does not flash. Any suggestions are deeply appreciated. Thanks


Hey tombston,\015\012 An error code of 99 is Canons general error code for this camera, and they suggest cleaning the lens contacts and/or removing the battery and then reinserting it. If this doesn’t work I wou ... Canon Rebel XT / EOS 350D Digital Camera

Help with settings using an external flash


... Konica Minolta DiMAGE A200 Digital Camera

Using external flash modes with fuji finepix s9600


... Fuji Finepix S9600 Digital Camera

Just bought my Canon 600D slr today. I am a beginner, but playing with it tonight I have found it makes an electrical Zap noise just after focusing, around the flash area. I am using the built in flash only not any external flash. Thanks Jason


I have the same problem with my 600D. Any idea if canon replaces it or is there a firmware fix? ... Digital Cameras

Settings that must be set before you can use the external flash


Yes, set the camera mode dial to P, A/S/M or any shooting mode except the movie mode. Turn on the extension flash unit's power then select the camera's flash mode. The flash mode button on the camera controls the built-in flash as well as the extensi ... Olympus Camedia C-740 Ultra Zoom Digital Camera

Using external flash


Yuo can use external flash in P, S, A and M mode.\015\012To activate the externale flash mode, press Menu/OK and use > to cycle through the different options. Switch External Flash to On. Press OK. ... Fuji FinePix S7000 Digital Camera

Any settings that must be set before you can use the external flash feature


Yes, set the camera mode dial to P, A/S/M or any shooting mode except the movie mode. Turn on the extension flash unit's power then select the camera's flash mode. The flash mode button on the camera controls the built-in flash as well as the extensi ... Olympus Camedia C-765 Digital Camera

When shooting indoors with my 300d (base rebel digital),I have been encountering some light metering problems.I use the 430ex as an external flash. While shooting a subject in front of an external light source-(window, etc.), no matter how small of the frame area include the outside light source, the cameras light meter will invaribly expose the entire image based on the outside ambient light, causing the image to be grossly underexposed. Do you have an explanation/solution for this aggrivating


Set the metering mode to Partial Metering. This uses only 9% of the field of view, centered around the middle square in the viewfinder, as the subject area. If you still find it too bright, try changing the exposure compensation a couple of clicks. ... Canon Digital Cameras

Can the internal flash be disabled when using externally attached flashes?


T is my understanding that you must use manual exposure (shutter and aperture) with an external flash. This shouldn't be a problem (set the camera to the settings on the guide chart that comes with your flash, and let the flash worry about the streng ... Epson PhotoPC 3000Z Digital Camera

I have a Gemini 4700 external flash and a Nikon D3000. Can I use to flash on my camera, or will it mess it up?


... Digital Cameras

I guess the solution to my E510 pop up flash creating a shadow when my 9-18mm lens is on, is to use the external flash. Too bad Olympus didn't think of this earlier. Any other thoughts?


You can use Sony or Canon ,so http://www.batterieschargerstore.co.ukvar gtbTranslateOnElementLoaded;(function(){var lib = null;var checkReadyCount = 0;function sendMessage(message, attrs) { var data = document.getElementById("gtbTranslateElement ... Olympus EVOLT E-510 Body Only Digital Camera

When using external flash some are ok but some show movement, whats the best setting to use, ive tryed auto and manual, john


There is no single "best" setting, that's why the camera provides so many. It depends too much on the particular setting, the effect you're going for, and other factors.If you're seeing undesired movement, that's an indication that the sh ... Samsung GX-1S Digital Camera

A Canon A570IS will power on and and everything works with external power (3.5-3.7V, 2A. 3rd party) but is dead with batteries (two fresh alkaline or NIMH AAs). I have used parts (from junk 570s) and have replaced the main board, button board, flexicable that includes on/off switch & shutter, leds, etc.. Again, lens, flash, storage, LCD, etc. work with external power, but not with batteries. I am at a loss. Any suggestions?


Since the external power works, we need to know, first off, if the battery terminals have continuity with the external power supply contacts. That will tell us an important part of this puzzle. The one hard thing about this problem, is that what ... Canon PowerShot A570 IS Digital Camera

My Rebel T1i's built in flash stopped working after I used a 580EX external flash on it. It won't even show up on the LCD screen.


Really? the best solution available is to take the top of your camera off?i don't think so.Here's a very simple solution I found to get the flash to pop up without destroying your camera. http://forums.dpreview.com/forums/read.asp?f ... Canon EOS 500D / Digital Rebel T1i Digital Camera

Using Non Panasonic External Flashes w/ DMZ-FZ20


Yes u can.\015\012Try one of Nikon's... ... Panasonic Lumix DMC-FZ20 Digital Camera

What external flashes can be used for canon cameras?


Any current or recent Canon flash unit will work fine. Most current or recent third-party flashes will also work, though you may not get all of the features you might with Canon units.Older flash units designed for film cameras tend to have a hig ... Canon EOS 1100D / Rebel T3 Digital Camera

Photography When I use external slave flash for modelling the picture is underexposed How to set the camera function whether on manual mode or the auto mode


Set it in manual, and open up the aperture. Flash exposure is mainly affected by aperture, Also make sure your shutter speed is set at flash sync speed ... Nikon Coolpix 8800 Digital Camera

Can a metz cl45 external flash gun be used on the 9600? Thanks Steve


Without knowing what a 9600 is I cannot be sure, but the cl45 has a flsh connection cord to be conected to your cameras X sync port. This means the camera will only trigger the flash and the flash unit does all the calculations on its own (ie it does ... Digital Cameras

Are there any settings on the camera that must be set before you can use the external flash feature?


Yes, set the camera mode dial to P, A/S/M or any shooting mode except the movie mode. Turn on the extension flash unit's power then select the camera's flash mode. The flash mode button on the camera controls the built-in flash as well as the extensi ... Olympus Camedia C-730 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1182 seconds