Having problems with your Fuji FinePix S7000 Digital Camera ?

When i take picture that time not showing date month and year.


Answers :

The date and time (and a lot more) are stored with every picture in its EXIF metadata. Any photo viewing/editing program should be able to display this data. To print this data, please consult the documentation for whatever program you're using to print your pictures. Depending on the program and printer you may print the date on the image, in the margins, or on the back.
Repair Help & Product Troubleshooting for Fuji FinePix S7000 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

When i take picture that time not showing date month and year.


The date and time (and a lot more) are stored with every picture in its EXIF metadata. Any photo viewing/editing program should be able to display this data. To print this data, please consult the documentation for whatever program you're using to pr ... Fuji FinePix S7000 Digital Camera

The camera is 2 years old, when turning on the power it goes to the date set,you can change the year, then it slides over to the month, but seems froze up, then the camera resets itself, if you skip the date set up, it shows a view on the lcd, but can't take a picture, and the camera resets again. My son borrowed it and took pictures snorkeling, so it may have gotten wet, but the lcd screen is not distorted as it was a year ago when I got water in it.


... Olympus Stylus 770 SW Digital Camera

I received a canon powershot as a gift last year and am just now really starting to use it. The pictures seem fine, but the it seems like I am frequently requested to put in the date and time (i.e. about every 2nd or 3rd time I turn the camera on). Is there somethign I can do to get the camera to retain the date and time? It is sort of annoying that I can't turn it on and take a picture quickly since it won't let me take one until I have entered the date and time. Also, I don't think it is stamp


There is a button battery in your camera (CR1220) that remembers the date and other settings when you remove the main batteries. It probably needs to be replaced. It's in a slide-out holder next to the AA batteries (see page 184 in the manual). ... Canon PowerShot A590 IS Digital Camera

My canon powershot camera goes to set the date and time every time I turn it on. I set the date and time, take a few pictures, turn off the camera, turn it back on again and it ask for the date and time to be set again. This problem developed after a year and a half of no problems. Is there some way to set the clock where it will continue after it is turned off?


\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min.\012 ... Canon PowerShot SX10 IS Digital Camera

I want to take the date and time off already taken pictures so I can print the pictures without the date and time showing.


For already taken photos, you would need photo editing software to remove the date/time stamp. With such software you could either crop the photo to remove it, or apply more labor intensive technques such as cloning to cover it. One good, free, and ... Digital Cameras

My camera was working fine for about a year. Then one day i turned it on and the screen was black but it shows the grid and date and time also it shows the menu and the differnet scene selections. If i take a pic the flash works and the sound works, but no image just black and the time and date. i think its the shutter that is stuck?? How to fix this?? Not under warranty anymore.


Take the camera andturn off the flash. Point it toward you and take a picture. Look in the lens to see if you see the shutter activate. If you dont see this work, then your shutter may very well be stuck. \015\012\015\012There isn't reall ... Olympus FE-310 Digital Camera

Nikon D70 I have a Nikon D70, been using it for 3 years now without a problem up until 2 months ago when I tried to take a picture the screen read "CHG" or "Charge." I assumed it meant the battery. I charged the battery for a full day thinking this would work and of course it didn't. I did the same thing for the next three days with no luck. I eventually bought a new battery and still the word "CHG" or "Charge" shows up on the screen and doesn't allow me to take any pictures. Would you happen to


Greetings,It is actually an error message generated by your compact flash and means that the card is no longer readable. A lot of D70 owners have reported this error without being able to find another solution other than reinserting the card or ... Nikon D70s Digital Camera

I have had a Nikon CoolPix L110 for 10 months. I've never encountered a problem transferring pictures from my camera to my computer during this time...until now. When I connect my camera using the USB cable, Nikon Transfer opens as usual, but nothing happens after that. The source is not showing the camera. The camera works fine. I can view and take pictures. However, the difference this time is that my camera is full. Could that have something to do with it? I would like to be able to


Welcome to FixyaTry the alternate way of transferring the pictures to your computer instead of using cable. To download pictures from your camera to your computer involves removing the memory card from the camera a ... Nikon Coolpix L110 Digital Camera

I want to have the date show on my digital prints. I have set both the time clock and world clock, but date will not appear on screen after taking picture, or on a printed picture.


You have to go through the main menus and select time and date. and tell it only date. ... Panasonic Lumix DMC-TZ3 Digital Camera

How do i get rid of date and time in the camera so it does not show when taking pictures


You will need to go into the menu and turn this off. See "Imprinting"...\015\012\015\012Here is a link to your manual:\015\012 ... Samsung Digimax A5 Digital Camera

System Error I downloaded the pictures onto a CD from my Konica Minolta today like I always do. When I was finished I went onto the camera to delete the pictures and format the card - like I always do. (I have had this camera for right at 1 year) When I turn the switch to the "view" mode it comes up with "system error" within about 2 seconds and the whole camera turns off. If I go really fast I can delete one picture at a time. I can still take pictures and they still show up (for 2 seconds).


Same thing happend to my father's camera (memory card). Seems that deleting the pictures from the card via the computer solves the problem. Corrupt files on the card cause the camera to read system error. No corrupt files = working camera! :) ... Konica Minolta DiMAGE Z5 Digital Camera

No image on lcd,if you snap a picture,the picture will be black,camera has set up for a while.it will power up and show functions and set up info on lcd you can set time and date,but no image,flash works,but takes no picture,any ideas?


It is known problem of ccd imager chip failure in Canon A85 camera, Canon offers free of cost ccd imager chip replacement.Click ... Canon PowerShot A85 Digital Camera

I have a 2-year old FE-360 that recently stopped turning on to take pictures. It beeps 12 times and won't show a view. I can, however, turn it on to look at stored pictures by holding down the view pictures option while pressing power. I've tried cleaning/checking the lens aperature, and have verified that the battery is charged. Any ideas?


Did you get your camera fixed? I have the same camera and the same problem. could you help me if you did get yours fixed? thanks ... Olympus FE-360 Digital Camera

Time settings i cant get the timestamp right, after i put in the new year,date and time following the manuel, it still shows the manufacturer setting 31.12. 2000 0.00 after i take a shot


... Oregon Scientific AT18 Digital Camera

My 2-year old camera has a blank screen when trying to take a picture. If you go ahead and shoot, the picture processes properly--you just can't set up a shot. The menu screen shows faintly if held at a particular angle. I have charged the battery. I have turned it off and on multiple times--doing the same thing and hoping for different results!


This sounds like it could be a bad backlight on the lcd display. Before you mess with that, make sure your battery terminals inside the camera, as well as on the battery, are clean (use a qtip and alcohol, or a pencil eraser). It's also possible ... Nikon COOLPIX S200 Digital Camera

My Fuji FinePix S5000 has given me years of excelent service. While on break I stored the camera for 2-3 months. When I pulled it out I noticed I had inadvertantly stored it in the "playback" mode. It was of course in 'power save off' mode but when I turned it back on, the viewfinder and LCD monitor are black and it takes black pictures like as though the lense cover was on. Everything else is normal, I am able to view previous pictures saved on the xD card and it shows promptings on the monitor


Have you tried removing the actual lens(?) to see if there's something inside the camera house that's not supposed to be there. I'd find it highly unlikely that the, thou who knows. The best thing to do, would be to drop it off at your local camera r ... Fuji FinePix S5000 Digital Camera

Black-out I've had my camera for about six months now, since February. It's worked fine, and I never had a problem, until about two weeks ago. Now, when I turn it on, all I see is black. If shaken it shows an image for about two seconds, before it goes black again. Taking pictures doesn't do anything, it's still black. Sometimes I can get an image, but it's grainy and only shows up as blue with light on the main object. It's worked fine up until now. I've changed the batteries a few times, but i


Mine was given as a gift for my birthday: no reciept. how do i get it fixed???? they only will keep it under warranty for one year with a reciept..... ... Kodak EasyShare C533 Digital Camera

I have just bought the Kodak M381 camera and when I set the date and time and click ok, the time is set but does not display on the LCD screen at any point, so when I review my pictures there is no way of knowing when I took them. You can date the pictures retrospectively but that takes time and will be incredibly tedious and you soon forget. In the manual it says to select the date time stamp but I am unable to find it in my set up menu and I'm beginning to think this camera does not have this


I had the same problem. I think the camera does not have this feature, to bad it was a nice camera ... Digital Cameras

My olympus 1030sw camera will not record video to the 8 gig micro sd card (shows over 30 mins record time but only records 10 seconds to the cameras internal memory) my drivers are all up to date and the card i am using is a sandisk 8 gig which is on Olympus site stating it is fully compatibleif i take pictures this is working fine to the memory card so the card is not at fault.


You must have firmware version 1.1 or later for movie photography using 4GB or larger microSDHC card. ... Olympus ? 1030SW Digital Camera

I have 2 pentax optio m20 cameras purchased at the same time. Both have developed the same problem: hit the on button and it tries to come on, but makes a funny sound, lens moves in and out trying to focus (screen is lit showing focus changing and green mode icon), then the camera shuts off and never gets into picture taking mode. I fixed one of the cameras once by pushing buttons after connecting and disconnecting from the computer (and the camera worked okay for several months), but repeate


Your previous diagnostic definitely\015\012 indicates a mechanical problem, once the possibility that a false \015\012sensor signal to the main board as the cause by resetting all functions.\015\012 It is very likely that ther ... Pentax Optio M20 Digital Camera

When looking at the lcd screen it dont show what you are takeing a picture of it shws date and time how do i turn it on?


See Chapter 5, "Live View Shooting" in the manual. If you need a manual you may download a copy and more ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

I need to make sure date and time shows up on each picture i take and upload to the computer, is there a setting on the camera or do I do that when I upload them?


The date and time (and a lot more) are stored with every picture in its EXIF metadata. Any photo viewing/editing program should be able to display this data. To print this data, please consult the documentation for whatever program you're using to pr ... Canon PowerShot SD1100 IS Digital Camera

"unidentified image" About half the time when I take a picture it will take fine and show up and then when I go to look at it after it will say unidentified image. Sometimes the picture will still show up but in a small portion of the screen and still say unidentified image. I thought it was the memory card bought a new one and synced it and it still does this about half the time.


Not a perfect solution, but CANON will replace the camera, regardless of waranty if they find it is their problem if it is the SD400 ... I've sent them an email to see if the same applies for all their cameras.\015\012 Maybe if enough people ... Canon PowerShot SD1000 Digital Camera

I have a Nikdon D3100 camera and the metadata information has been incorrect on many of my pictures over the last couple months. For example I took pictures last weekend that say 2001 as the date. I am taking a photo class and the instructor asked me to reset my camera to see if that helped. It did not so I changed dates on my own. I right down all my exposures when I take the pictures because it is a requirement of the assignments. Long story short I just failed a big assignment because my meta


Hello, did you update your date and time in settings?, maybe is behindif you will need more help with your nikon d3100 to repair it i had found a official service manual for it click the below link: ... Nikon D3100 Digital Camera

Taking pictures i've had my camera for about 4 months now and this is the second time this has happened. my camera turns on fine but i can't take pictures or videos. i can look at one picture from a whole bunch that was saved in teh memory card but thats it. the first time this happened my friend told me to shake it and i don't know how that helped but after a few minutes my camera worked perfectly fine again. can someone help?


HiYou said it started working again, so I don't see what 't00nz' is getting at with his answer.It sounds to me like your flash was not working... but that would only stop it from taking pictures and not video as the flash is n ... Canon PowerShot SD750 / IXUS 75 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3059 seconds