Having problems with your Fuji FinePix S9000 Zoom Digital Camera ?

Command Dial not working

\015 Hi,\015\012When using A,S,M, modes etc can't alter the Shutter or F number. Also not able to use expsure compensation.\015\012Help please.\015\012Jim\015

Answers :

I have had 2 cameras which developed a fault with the selector dial for exposure compensation & other parameters. Problem was a faulty selector switch on 1st camera. I was lucky to have this repaired under guarantee. Fuji replaced the top end of the camera to fix the fault.

Don't know how much it would cost to get fixed. These cameras are no longer made by Fuji, but I like them for a number of reasons and plan to use them for as long as possible.

Might be cheaper to buy a used replacement on Ebay rather than getting it repaired.
The problem is no electric it's mechanic the solution is here
\015\012
\015\012http://www.flickr.com/photos/jgustavoam/sets/72157603573975379/
Repair Help & Product Troubleshooting for Fuji FinePix S9000 Zoom Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

D7000 main command dial doesn't seem to be working. Many functions say to press a button nd then use main command dial for the options, but it doesn't scroll through any when I turn the dial. For example, for auto focus modes. Any ideas?!


... Nikon D7000 Digital Camera

On my D50 the COMMAND DIAL has stopped working so shutter and apertrure cannot be set - but - normal photographs cxan be taken using 'AUTO' or MODE settings on the MODE DIAL. Only P,A,S,M modes cannot be used. Otherwise all functions of the camera work well and photo results are good. The camera has NOT been dropped or jarred.


I have the same issues. Let me know if you got an answer.\015\012Thanks, [email protected] ... Nikon D50 Digital Camera

Main command dial not working


... Nikon D200 Digital Camera with 18-70mm Lens

Command Dial not working


Have you solved your D40 problem yet? If not, give more details for further assis.tance ... Nikon D40x Digital Camera

Wont work 20 is flashing in the lcd and mode but doesnt affect it? i have the d60 but it wont turn off, i tried swsitching it off **** it doesent work, it doesent take pics either i rotate the command dial and nothing happens,, whats worng help me , 5 months old


Hi...The transmission system that moves the lens in and out has a problem with it's gears. There is most likely a gear or an actuator that has fallen out of alignment and is getting stuck at a certain point as the lens comes in/out.There is some dist ... Nikon D60 Digital Camera with 18-55mm + 55-200mm lens

Fuji S9000 Command Dial stopped working - Fuji Digital Cameras


... Fuji Digital Cameras

Command Dial not working


I have had 2 cameras which developed a fault with the selector dial for exposure compensation & other parameters. Problem was a faulty selector switch on 1st camera. I was lucky to have this repaired under guarantee. Fuji replaced the top end of ... Fuji FinePix S9000 Zoom Digital Camera

FinePix S9500 Command dial doesn't work - Digital Cameras


Hi there,try to remove the unit battery for a while. this can be a malfunction on the unit system that needed to be reset.let me know ... Digital Cameras

The command dial on my fujifilm finepix s9500 has stopped working


... Digital Cameras

Command dial on my s9500 doesn't work. Does anybody has the service manual or knows how much does the repair cost


Contact fuji spares department, I am hoping to get mine repaired free as it is a design fault . There is a small plastic shaft from mthe rear of the dial that breaks with normal use .... tel No on www.cameras.co.uk ... Fuji FinePix S9500 Zoom Digital Camera

I have a Nikon D3 and the main command dial will not change shutter speed. It will change info in the rear control panel but not the shutter speed in the top panel.


... Nikon D3 Digital Camera

Suddenly I can't control the aperture with the sub command dial in the manual mode. I have tried a "hard reset" and the two button reset to factory defaults. In M,A and S modes the shutter and aperture values will disappear and only return after a two button reset.I can adjust the aperture in A mode with the command dial.The shutter speed is adjustable in M mode with the command dial.


In Manual mode only the front dial can be used to set the aperture. That is probably In Aperture mode you can only choose the the Aperture. Shutter speed is automatically chosen. That is why the shutter speed value will disappear.In Shutt ... Nikon D80 Body Only Digital Camera

My Pentax *ist DL camera has started to give me problems. The rotary control dial on the top left of the body does not work. When I turn it, it does not display the setting as set on the dial. In addition the flash has stopped working. It takes good daytime photos.


Hi,it is best to be sent for repairs, since it appears that something is wrong inside of your camera. Software doesnt respond to the switches, it is best to be not turned on and sent to repairs. ... Pentax K20D Digital Camera

The mode dial doesn't seem to work. The camera is stuck on the high speed sequential setting. When we select iauto, it takes one picture and then freezes. When we select the camera option on the mode dial, it takes 13-15 pictures in succession and then freezes. The pictures are taken without the button being pressed. We need to power off to change modes. The camera did work for a little while.


Base from the description of your problem what we can do here first to correct the problem is to reset or restore the camera settings to its default from the camera MENU. Then once you done that check if its working fine now. ... Olympus Digital Cameras

Command dial The command dial has fallen out. It doesn't appear to be broken, but won't engage when re-inserted.


... Fuji FinePix S9500 Zoom Digital Camera

1. Mode Dial not working, "Take-Picture-Button" not working.


If the camera was dropped, then it's really causing those kinds of issues like mode dial and shutter button will not work.\015\012\015\012But you could still try these steps below:\015\012\015\012First, do the POWER RESET: ... Samsung Digimax S630 Digital Camera

I have got a Panasonic NV EX3EN digital camera.I am experiencing the following problem, can any one solve it out please. menu button not working-wont record or play back....there is a red light flashing o the lCD and a command is comuing up on the LCD screen U 10.when i disconnect the battery and reconnect it , the camera works for few seconds and again stops working.


... Panasonic Digital Cameras

My flash seems to be stuck in the "suppressed" mode. Also the Manual on page 64 refers to a "turn" of the "command dial" to the "flash mode setting". Since that item is not described anywhere else and the only turnable dial is the "mode" dial, I assume that it means to press the flash mode arrow. When I do that nothing happens. The flash modes do not display as described in the manual. I can't figure out how to get the flash to function properly again. I have made all my attempts with fre


Remove memory card and batteries, press and hold power button for 5 seconds, wait a few more minutes, put just the batteries back in and try it. Also make sure zoom and lens are not dirty and no debris on them. If so, use rubbing alcohol and cotton ... Fuji FinePix S1000FD Digital Camera

Mode dial is no working properly


... Panasonic Lumix DMC-FZ18K Digital Camera

Hi. I have a Canon Xsi/450D Camera. I can access the menu funtions when in the preset modes eg. landscape, sports etc. but when i rotate the dial past the Auto mode into the manual settings modes(the creative zone as canon calls them) the menu funtion will not work. I push the menu button and nothing, the remote funtions will not work either. I've tried to update the firmware, but as you have to access the menu in the manual modess to do this i cant update the firmware either(also cant do


The manual mode runs off power from a separarte capacitor. The capacitor holds a charge which is greater than the voltage of the battery for the needs of this option. When a capacitor fails nothing will operate in the manual mode. You will need to ha ... Canon EOS Rebel XSi Digital Camera

I have a Panasonic DMC-LX2 digital camera, I'm based in the UK. Has worked fine for a couple of years, but 2 weeks ago, when powered up, none of the buttons work. Screen is illuminated, lens emerges OK, mode-select dial still rotates and switches between modes, on/off switch and aspect switches OK, but shoot button, all 5 'menu group buttons, anti-shake button, display/LCD mode button, waste basket buttons', zoom in/out control and 4-way direction button all 100% non-functional. Card is being ac


I just got identical situation today, and I have no clue at all. However, I figure that the camera is actually working busy like someone is holding the "UP" button continuously. To see this, power on your camera at any mode except the "Scene mode". A ... Digital Cameras

MY CANON SX20IS CAMERA LENS IS NOT WORKING, FUNCTION, DIAL MODE ARE ALSO NOT WORKING


... Canon PowerShot SX20 IS Digital Camera

My camera is not working well, the dial only work in automatic, lanscape and night option, the problem is on pet/child, movie, tv, etc, options. Do you have an idea how to fix these issues?


Go setting option in the camera and reset it, then use. If the problem ongoing then please visit service center. The dial may short from the inside. \015\012Thanks. ... Canon PowerShot SX100 IS Digital Camera

Everytime I connect the 70-300, lens, I get error code fEE and cannot take pics. When the smaller lens is on, it works fine. I made sure the aperature dial was locked but still nothing. It is our yearbook staff's camera (only a year old) and worked fin at first, and now fEE. HELP!


It might be error of the lens, maybe the flexy-cable inside the lens is ripped. ... Nikon D80 Digital Camera with 18-135mm Lens

My shooting mode dial is not working properly. when i switch the mode dial to auto it show as manual on my LCD. camera type is powershot A580. thanks


... Canon PowerShot S500 IXUS 500 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1404 seconds