Having problems with your Fuji FinePix S9500 Zoom Digital Camera ?
Fuji FinePix S9500 has a blank viewer & lcd screen, it has powered up but nothing is being displayed in either.
This took me a bit, in fact I needed to got to one of my Fujifilm cameras to see if I could duplicate what I was thinking the problem could be. So here goes. There is a small button on the back body just off the lower right side of the LCD screen it has Disp/Back written on it. What I'm saying is that this button has been pushed to give a blank screen which will affect both the viewfinder and the LCD. To get to that point I had the camera in Manual mode ISO at 100 and the lens cap on. The aperture was set for F9 and the shutter at 1/60th. My camera has a "shake" icon so in Auto and program there was the shake icon on the LCD screen it also showed in the "A" mode as well. Now that said my version of your camera may be a few models ahead, your camera may not have the camera shake feature or icon. In short I think you have pressed the "Disp/Back" button and changed the view mode.
Repair Help & Product Troubleshooting for Fuji FinePix S9500 Zoom Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Fuji FinePix S9500 has a blank viewer & lcd screen, it has powered up but nothing is being displayed in either.
This took me a bit, in fact I needed to got to one of my Fujifilm cameras to see if I could duplicate what I was thinking the problem could be. So here goes. There is a small button on the back body just off the lower right side of the LCD screen it ... Fuji FinePix S9500 Zoom Digital Camera
Hi! My camera powers up, shows the EasyShare splash screen, then nothing can be viewed either on the LCD or via the eye viewer. Yep, the cap is off so that's not obstructing it; there is plenty of light, the flash is on but does't work. I also can't get the Menu or Review to display on the LCD. This has just begun happening, no damage to the unit, it's fully charged... Please help!!! Thank you so much! Tracy
Hi Tracy.The symptoms are those of an internal hardware failure. The camera starts up, indicating that it is powered. Then it shows the splash screen, which says that the LCD is working. Then the camera crashes while doing the initial tes ... Kodak EasyShare Z740 Digital Camera
I have a Finepix S7000. This camera has been great for the entire time I have had it. Suddenly a day ago, I turn it on and it pretends to "Boot" up....the display comes on with the "Finepix" graphic...the lens "Moves" into position....the "Green" power light on the right grip side come on, (and stays on)....then, Nothing. When I try to turn it off and restart...nothing. The camera will not even turn "off" unless I open the battery hatch, (I put a fresh set in). Please help...I love this camera.
Hello thomas... remove the new batteries and then use the eraser end of a pencil to clean the battery contacts within the battery compartment of the camera. remove all of the eraser debris. reinsert the new batteries and try it again.\015\012 ... Fuji FinePix S7000 Digital Camera
My samsung s1070 will not turn on. it was working yesterday and i was able to take pictures with it. now when i turn on the power button the camera beeps three times but nothing is visisble on the lcd display. also the lense is fully out even though the camera will not turn on. why is this happening and can you please advise me how i can turn the camera back on so that the display works aswell?
OK you are probably going to think I am loony giving you this advise But No I am completely sane!Get a can of compressed air OR acces to a compressor at your local garage Get them to fit the triggered air blower tool to it.Blo ... Samsung S1070 Digital Camera
Coolpix L18: The LCD screen is broken; just displays a large black "blob" on a white background. Would this prevent all other camera operations? When the camera is turned on, the green power light flashes, but nothing else seems to work. Camera will "beep" when shutter button is pressed, but lens never opens. Is this a LCD issue, or are there other problems as well?
... Nikon COOLPIX L18 Digital Camera
Canon Power Shot S1IS 10x optical zoom 3.2 mega pixels: I turn the camera on and cannot view any subject images either through the viewfinder or LCD screen. The cap is off and the LCD screen and viewfinder are completely black. The display information works fine.
Hi,\015\012Your Canon S1IS camera has defect in CCD Sensor and Canon will repair it Free Of Cost. For details, please click ... Canon Digital Cameras
Canon A75 Canon compact displays picture like a cracked window and shutter will not operate and will not playback. Powers on, lens extends OK, batteries OK. Tried with two different cards with same result. Nothing appears on LCD screen except this cracked window effect. Any idea what could be wrong ? Looks terminal to me.
Http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct& ... Canon PowerShot A75 Digital Camera
Hi, I have Canon PowerShot A95, Digital Compact Camera, when i switch on the camera it will beep a few times and the LCD will display a little E18 in the lower-left corner. The lens gets stuck in the extended position, and refuses to move either to focus the lens or to retract when powered off. would be great if you could provide some advice for rectifying the problem. thanks
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to g ... Canon PowerShot A95 Digital Camera
DSC-W200 Frozen My W200 has the lens open (extended) and will not close. Additionally, when I press the power button or the play button on the back, the LCD lights up and says Sony, but nothing else happens. I've tried connecting it to my macbook, using a fully charged battery, memory card vs no card, etc. Nothing seems to work. If I press the power button a seond time, the green power light goes off, but the LCD still says Sony. Any help would be greatly appreciated. Not too eager to send it
Try this it works for lens problems like you describe ]]] OK you are probably going to think I am loony giving you this advise But No I am completely sane!Get a can of compressed air OR acces to a compressor at your local gara ... Sony Cyber-shot DSC-W200 Digital Camera
PV-DC152D CAMCORDER, LCD Display only works if it is pulled out, turned 180 degrees and pushed back into place so the display is facing you. If you move the LCD display over 3/4" away from camcorder it will go black again. Personally, I think this is an issue with some sensors that gauge when to turn on the LCD display "ON" and Viewfinder "OFF" and vice-versa. Any help on this would be appreciated since there is nothing else wrong with the camcorder.
The most likely problem is a cracked ribbon cable that goes between the camera and the display. The cable needs to be replaced. Typical cost for this is around $40 or so plus labor. I would not suggest that you attempt this repair yourself as open ... Panasonic Digital Cameras
Firmware install on Pentax ist DS. Had Ver2.0 & everything worked fine. Simply wanted to upgrade to V2.02 to used SDHC cards. User Power AC and install ran approx 90 secs and displayed showed half way thru Phase 2/2 and then LCD went blank. No 'Complete' displayed. Now camera operates but no back LCD monitor display (top small LCD seems to work) and card seems not to read or write. Camera does release shutter but otherwise camera is not useable, Help!
You need to go to the support section of the Pentax website and engage in a live chat with a service tech using your computer or even a phone conversation to resolve your problem. ... Pentax *ist DS Digital Camera
Display problem Hello, I've had my SD1000 for less than 3 months. Sometimes the display goes black, I can still access the menu options and if I slide the button to review images they will display on the LCD panel. But even if I've just powered it on, the LCD is black, if I take a picture anyway, the picture is also black. Sometimes if I turn on the camera and turn it off again a few times it starts displaying correctly again. Is there a hardware problem with my camera or is this something I sho
I had the same problem with my SD1000 and was so frustrated with reading all of the troubleshooting "solutions".... After a couple of days researching, I finally stumbled upon a site that actually suggested turning the unit off and "slapping" it a c ... Canon PowerShot SD1000 Digital Camera
Blank LCD My sony DSC T5 camera LCD display is blank. When the slider is pushed the green LED is on but screen is blank. When you try to power off the camera it does not power off, the LED remains on. Removing the battery power it off. Any guesses I am very handy at reparing electronics.
Camera of this type are not usually repairable. No Parts.Like toasters/ kettles etc they are considered 'disposable'But don't take my word for it - check out the makers support page ... Sony Cyber-Shot DSC-T5 Digital Camera
Canon power shot S230 elph. I have two of them and they both use to get purple, magenta lines showing up in LCD display. I just happen to power them on again and one seems to be working but the other will view prior pictures fine in the LCD but when trying to take a new picture it very dark in LCD and picture is dark almost black when viewing. Flash is going off when taking a picture.rn Thank you, Cindy
... Canon PowerShot S230 / IXUS 179 Digital Camera
Lcd screen the screen illuminates,but it doesn't display anything. lcd screen is blank white, nothing displays, but it takes a picture you just can't see it.
I think the issue with your camera could be that the ribbon cable that connects the LCD screen to the circuit board is loose somewhere. In order to fix this, you will have to carefully disassemble the camera. Inspect the ribbon cable to see if it is ... Samsung Digimax i5 Digital Camera
Lens error My Casio ex-z60 camara lens wont fully extend.When power is turned on, a clicking noise is heard. The LCD displays what will be captured, but is is blury. Then the lens closes and a "lens error" message apears on the LCD. Sometimes a message that says "retry power on" appears. Every thing else works fine. I am able to view my pictures .but I can not take any pictures.. Thank you
This is the lens focus gears. They are either knocked out of alignment, or debris has jammed them. The good news is it can be fixed....Casio most likely won't help. Hint...google my user name. ... Casio EXILIM ZOOM EX-Z60 Digital Camera
G5 shoot mode nothing on lcd, flash fires, nothing on lcd. pictures from the pass are on the CF card and can be displayed. New battries and I have tried with a new Cf card formatted
... Canon PowerShot G5 Digital Camera
I have canon power shot A 720 IS. Its been fine for 2 years. suddenly it stopped displaying in the LCD screen. But i can take pictures by looking through the view finder. Also, the LCD display works when in the video mode and photo stitch mode. please let me know the solution. Thanks.
Maybe the display was turned OFF. Check it and turn it ON. If still in problems, look for a specialized service to check you camera. ... Canon Digital Cameras
LCD display My LCD display does not work anymore.When is on there are some colourful lines,but I can't see nothing through.
This 1.7" LCD is made by AUO and it is most likely defective. You may try reseating the internal ribon cable of the LCD connected to the printed circuit board by opening the camera back case (5 small screws) with a tri-wing screwdriver size #000. Car ... Fuji FinePix A350 Digital Camera
Lcd screen sir i got my camera 1year 2 month dack once my lcd screen display no image and repair it in service centre in warranty period but again my camera fall from some height my lcd screen again show nothing i carred it back to service cetre they said my lcd screen has damage and require new lcd screen its price coast about 5000 what is its actual price and i got my camera repair in cepest way.
HiWe have your LCD available for purchase in our store (google: darntoothysam com) or you can look for a defective camera online and buy it and remove the LCD to use to fix your camera.If you can do the work yourself the chea ... Sony Cyber-shot DSC-W55 Digital Camera
Blank lcd I just got a new canon 600D. After playing with it for a while, i turned it off. Then after 5-10 mins i turned it on once again, and opened the lcd screen, but it shows blank(or say black). I can see that the lcd backlit is workeing, but nothing (no content) is displayed. Can this be an issue of low battery ? pressing the shutter button full also not capturing the picture. Flash works though, and optical view finder too, but it does not capture the photo.
Hi there:Some symptoms of a defective CCD include distorted images or abnormal colors, scratchy purple lines, blank or black pictures, and/or black videos with good sound being recorded on the camera's flash card. ... Canon EOS 600D Rebel T3i Digital Camera
Hi. I have a problem with my Panasonic DMC LZ1. Has developed a fault. When powered on with charged batteries and memory card inserted, the camera doesnt do anything on any setting except the review (arrow indicator) setting. The review setting only works if you 'power on' on this setting. (You can see photos on the memory card). If you power on -on a different setting and move the dial to review, then review doesnt work either. Neither the display (except for review as above) or lens wor
... Panasonic Lumix DMC-LZ1 Digital Camera
I have old Olympus C-840L. After connect battery power 6V and switch ON camera or display electronic then nothing does not started. It seems that problem is in power switching circuit. Battery supply 6V DC is not connected to electronic due to some part is broken. I need schematic of power supply. Please, answer me if you can help me to my e-mail. Thank you.
... Olympus Camedia C-840L Digital Camera
Lcd blurred I have a canon power shot a80 and when i turn it on and try to take a picture, on the LCD display i see a mixture of colour which is not even letting me see the image of the picture i would like to take. If i look through the lens and take the image, i am still able to view the picture I had taken if i set the camera on the view pictures. The mixture of colours on the LCD only shows when the camera is set on take the picture... and it doesn't even do it always. Thanks.
Canon will fix this camera if it is in the list of ccd defect. Contact canon.com for the Americas, or where you are. Call Service on the web page with the 800 number.http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&am ... Canon PowerShot A80 Digital Camera
Can't get a picture on the screen - just shows black. When we turn the camera on the LCD screen displays the function choices and menu options, but will not display any image. If we take a picture using the view finder and then check for the image, nothing is displayed. We just checked the memory card, and it doesn't even take a photo. All we got was black. Any suggestions?
Check the SD card, they have sliders on them which lets you "lock" the card so nothing can be put on or taken off of it. Make sure that is off. Then go through the menu on the camera and try to format the card again. If the card is bad it should give ... Canon Powershot A1000IS 10MP Digital Camera with 4x Optical Image Stabilized Zoom