Having problems with your Fuji FinePix V10 Digital Camera ?

After recharging my Fuji Finepix v10 it will not read the xd card. The camera is showing a card read error. I have tried to power down and power up and removing & reinserting the card. For a few moments the camera mode does reappear, but the card shows as empty now. Then the error message reappears. Any suggestions are appreciated.


Answers :

1 of two possibilities, card or camera problem.
\015\012
\015\0121) Have you got or have access to another XD card? If so try it. Does it work OK. If yes, its a card issue, if not, then a camera problem. If you can't borrow one, buy a low capacity card, cheaper, and try that. Its always handy to have a spare anyway.
\015\012
\015\0122) Hoping that is a card problem (Cheaper to resolve) give the card contacts a polish and give the card slot a blow to remove any dust there may be. Re-insert the card and re-format it using the camera menu. Note that this will remove any data stored on the card.
\015\012
\015\0123) If a second card doesn't work and so proves to be a camera problem, them my final suggestion is that you go to the Fuji website, follow links for support, check forums for similar problems or, see ig there's a firmware upgrade available for you camera on the "Downloads" page.
Repair Help & Product Troubleshooting for Fuji FinePix V10 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

After recharging my Fuji Finepix v10 it will not read the xd card. The camera is showing a card read error. I have tried to power down and power up and removing & reinserting the card. For a few moments the camera mode does reappear, but the card shows as empty now. Then the error message reappears. Any suggestions are appreciated.


1 of two possibilities, card or camera problem.\015\012\015\0121) Have you got or have access to another XD card? If so try it. Does it work OK. If yes, its a card issue, if not, then a camera problem. If you can't borrow one, buy a low c ... Fuji FinePix V10 Digital Camera

We insert a memory chip into our Kodak EasyShare C190 camera. The read-out informs us that the memory card requires formatting. We click on "OK." The camera goes into a "formatting" mode, then informs us that the memory card cannot be read. It goes back to the "Memory card requires formatting" prompt, we click on "OK," it goes back into the "formatting" mode, then tells us again that the memory card cannot be read. We can't do anything else with the camera until we take the chip out, then we hav


Your camera is only supporting SD/MMC Cards (up to 2 GB) and KODAK SDHC Cards (up to 8 GB). \015\012The card that you currently have might be faulty. Please try another card.You might also need to switch the camera over to saving pictures ... Kodak Easyshare C190 12MP Digital Camera with 5x Optical Zoom and 2.7-inch LCD

I have an Olympus C-740 Ultra Zoom Digital Camera. I bought a new memory Card. This camera is new to me and this is the first memory card I have purchased. I do not have a manual for the camera. I am having a problem getting the camera to read the card. I insert the card, turn on camera & the window says "no picture". I changed the batteries also. I can get a oval ring which says "Info on the left, picture of cards at the top, "Mode Menu" on right, & bars at the bottom.It appears the "Mode Menu"


Choose YES for the Format option. Allow it to finish. Should work fine then.\015\012Possible defective card if does not work after full format. Do not use any "quick format" option.\015\012First time must be FULL format. ... Digital Cameras

PROBLEM WITH MY KONICA MINOLTA DIMAGE A2 DIGITAL CAMERA, AFTER TAKING SOME PICTURES WITH MY CAMERA, I REMOVED THE MEMORY CARD FROM THE CAMERA AND DOWNLOADED THE PICTURES TO MY COMPUTER, EVERYTHING WAS FINE. THEN I RETURNED THE MEMORY CARD TO THE CAMERA, THIS IS WHERE THE PROBLEMS STARTED. THE CAMERA POWERED UP OK, THEN I TRIED TO WATCH THE PICTURES I HAD JUST TAKEN ON THE MEMORY CARD, THE CAMERA INFORMS ME,(UNABLE TO USE CARD). I THEN SWITCHED TO SHOOTING MODE, THE CAMERA WOULD NOT LET ME TAKE A


Have you formatted the cards in the camera or in the computer? ... Konica Minolta DiMAGE A2 Digital Camera

PROBLEM WITH MY KONICA MINOLTA DIMAGE A2 DIGITAL CAMERA, AFTER TAKING SOME PICTURES WITH MY CAMERA, I REMOVED THE MEMORY CARD FROM THE CAMERA AND DOWNLOADED THE PICTURES TO MY COMPUTER, EVERYTHING WAS FINE. THEN I RETURNED THE MEMORY CARD TO THE CAMERA, THIS IS WHERE THE PROBLEMS STARTED. THE CAMERA POWERED UP OK, THEN I TRIED TO WATCH THE PICTURES I HAD JUST TAKEN ON THE MEMORY CARD, THE CAMERA INFORMS ME,(UNABLE TO USE CARD). I THEN SWITCHED TO SHOOTING MODE, THE CAMERA WOULD NOT LET ME TAKE A


Hi.If you already tried several memory cards, then it looks like the problem is the camera.To ensure you can go to a camera shop and ask them to test it, but if you already tried several new cards (ensure size of card is with ... Konica Minolta DiMAGE A2 Digital Camera

When I turn the camera on, the canon logo appears on the display and the red light in back above the menu button keeps blinking, but nothing happens. When I turn it on in the "taking pictures" mode or "view pictures" mode, it just hangs and acts like it has trouble reading the CF card. I've tried multiple cards and had the same problem, so I think it's the camera and not the cards. Any ideas?


Canon logo is starting of camara indications just as company manuals ... Canon PowerShot S1 IS Digital Camera

I have a panasonic DMC-FX07 camera Whenever i go in the rewind mode it reads " read error please check the card" and whenever i go to click a photograph or a movie it reads "memory full" I cannot acsess my photagraphs already clicked on the camera and cannot click any new photographs. If the camera needs to be repaired please provide me with service numbers in mumbai(south mumbai/walkeshwar area) Thank you Kajal Vora


I have the same massage .. but my problem is that i lost my original m.card and i tried to but another one ...and this massage appear even if i tried to connect it to my pc it cannot read it if you have any Aida plz help..[email protected] ... Panasonic Digital Cameras

My DMC-LC1 says "Memory Card Read Error" when in picture recording mode and "No Memory Card" when in View mode. I have tried different memory cards and still the same message. Help. The camera is useless in this mode. Does anybody know how to remedy this?


? Try reformatting card. Lower volume first.(?) ... Panasonic Lumix DMC-LC1 Digital Camera

Hey. I bought a new camera some days ago with a new Digix 4gb SDHC memory card. I went to Disney World and took normally a lot of pictures. From one moment to another, the camera gives me the message "Memory card error" and won't let me take nor view pictures. I tried removing the memory card and everything. I checked and It isn't locked or something. Also, I tried using a memory card reader on my laptop, and it says I have to format to read the card. I REALLY don't want to lose the pictures.


Take the card to a Walmart and insert it into one of their picture kiosk machines. You can print the pictures or even make a CD of them. ... Canon PowerShot SD1300 IS IXUS 105 Digital Camera

My m1033 won't read the card and only lets me take 6 pictures and then says the internal memory is full. I get the pictures off the camera and card by connecting the camera to my computer, not with a card reader. But it won't let me get the pictures off the card anymore. Just happened yesterday. I removed the card and battery, and replaced them but that didn't help. Any help would be appreciated. Thanks.


First, promise you will never use the internal memory again. Go ahead...promise. Now, do this:\0121. Download any pics from the internal memory you want to save. Then, with no card in the camera, go into the menu and find "format"...follow the on-scr ... Digital Cameras

Unable to download cards from camera. Consistently gives error message that is unable to connect to camera. USB tested successfully with another camera, card tested successfully with another camera. When camera powered up after connection goes to Busy mode and then blanks screen and utility comes up with only one option (Manage files) available.


Oh, reinstalling the software you got, or try another software like Windows Photo Gallery, or another video editing software and 'Import from Camera'.\015\012\015\012Or, you can buy a USB adapter and directly remove the memory stick and manuall ... Digital Cameras

Hey. I bought a new camera some days ago with a new Digix 4gb SDHC memory card. I went to Disney World and took normally a lot of pictures. From one moment to another, the camera gives me the message "Memory card error" and won't let me take nor view pictures. I tried removing the memory card and everything. I checked and It isn't locked or something. Also, I tried using a memory card reader on my laptop, and it says I have to format to read the card. I REALLY don't want to lose the pic


The first thing that may be complicating things is, can your laptop read SDHC cards, or just SD cards? If the laptop is asking you to format it, then probably it's working, but be really sure, before you continue.Check the co ... Digital Cameras

Lumix tz3 Please turn camera off and then on again" as soon as camera is switched on. I Can view any menu, or read SD card, but cannot take any pictures. If I turn on in a picture taking mode it starts to focus and then the message appears, when I turn it off the lens does not close. If I turn on in playback mode, it works fine, if I turn it off from playback mode, then the lens closes. Basically, any picture taking mode triggers the error message. Solution?


Low battery maybe? Try holding camera firmly in one hand, with camera on and in record mode, and strike in on its edge firmly on the heal of your other hand. This technique is often sucessful with temporary camer 'quirks' like freezing, lens not full ... Panasonic Lumix DMC-TZ3 Digital Camera

I have a Canon camera, which worked fine. I had to recharge teh batteries often, that was all. Last night, i took it out. In view mode, the camera does not shut off. The moment i switch to camera mode, the lens opens out and then the camera shuts off. What do i do pls? Any help appreciated


I'm assuming you're talking about a point-and-shoot model, and not the\015\0121000D as the category suggests. Camera mode has significantly higher\015\012power requirements than viewing mode. It is possible that your\015\012rechargeable battery has d ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

Memory Card Hello, I'm not sure why my camera powers on when the memory card is not in but when I insert the memory card and try to turn it on, it doesnt power up and then when it does, the little green light blinks and then it reads memory card error. Please Help!1


Look to see if your memory card (your SD card) is "locked".for some reason, when a "locked" card is in my canon SD1000, it won't turn on at all.but when i unlock the card and put it back it, it works fine. ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

When I insert the cassette into the camera, I hear noise like it is setting up, but when I press play or record, whether I'm in the VCR mode or the Camera mode, it whirrs for a moment, then stops. When I open the camera to take the tape out, sometimes the tape is hanging out of the cassette, sometimes it's not. Also the power light blicks twice quickly. Thanks. Bill Freeman


\015\012The tape hangs out of the cassette which means that one of the wheels that move the tape or one of the motor moving the wheels is gone weak or is faulty.the power light blinking quickly also indicates that the motor part or wheel part i ... Panasonic Digital Cameras

Firmware install on Pentax ist DS. Had Ver2.0 & everything worked fine. Simply wanted to upgrade to V2.02 to used SDHC cards. User Power AC and install ran approx 90 secs and displayed showed half way thru Phase 2/2 and then LCD went blank. No 'Complete' displayed. Now camera operates but no back LCD monitor display (top small LCD seems to work) and card seems not to read or write. Camera does release shutter but otherwise camera is not useable, Help!


You need to go to the support section of the Pentax website and engage in a live chat with a service tech using your computer or even a phone conversation to resolve your problem. ... Pentax *ist DS Digital Camera

Hi, I've a Panasonic LUMIX FZ38 (fw version 1.0). When I want to clear the SDHC content via pc (camera in Mass Memory Mode), or to transfer the pictures via cut, it says ''Unable to delete...the storage card is write protected''. but my card isn't protected! And it's impossible to set the photo folder out of ''Read Only Mode''. Instead, if I put the same SDHC in a memory card reader, I can do everything I want. Do you think it's normal?


Yes, it's normal. You should never try to delete, format, transfer to camera, or anything else with the computer. It's always from camera to computer...never the other way around. And when you're finished downloading, always use the "safely remove ha ... Panasonic Lumix DMC-FZ5 Digital Camera

I have an Olympus tough 3000 wich seems to turn on and off when I try to power it on. the screen goes on and off every second. Not possible to take pictures. (this happens every time unless it have been connected to a computer. read further down) I wondered if a hard reset, installing the firmware once again could solve the problem. I have no problems in connecting the camera to mac computer. It can read whatever that is inside the memory card. If I disconnect the camera after it has been con


Hi,I'm sorry to know that the Camera is turning off and on again. I'll be glad to assist you with this. Please make sure that the battery in the Camera is fully charged and is holding the charge for making the Camera to turn on. You ... Olympus ? Tough 3000 / Stylus Tough 3000 Digital Camera

I just purchased a stylus 850sw and I am having a time of it getting the Panorama mode to go to any of the other options other than PC... does this camera need to be set up in a particular way to accept in camera mode 1 or 2. Yes I do have the Olympus M2gb XD picture card as suggested. Any help in this matter will be greatly appreciated as the owners maual is a bit weak. Carole [email protected]


Just called up technical support and got the solution:Go to "camera" mode, Press "ok/function" then change the setting from "Auto" to "P". It should then work. Shame that's not in manual. ... Digital Cameras

Date/Time stamp shows on pics fine but when I connect to pc with usb they all default to 1/1/2000. When I connect the usb cable into my camera the screen display reads "setup date/time usb connected" but at this point the setup buttons are frozen in both set up mode and playback mode. I want the pictures to transfer to the pc with the valid date that they were transferred on. Each time that I clear the internal memory or the memory card the camera starts naming the new pics with the same name as


... Moultrie GameSpy 4.0 Digital Camera Deluxe

Displays all white in all modes. Kodak V570. Turn the power on and all I can see is white. I have tried a different battery an no battery, just power cord. I know the camera good enough I can go into the menu options and select some different features without actually seeing the menu. All that seems to work fine and the lens is working ok. I can push the shutter button, the flash goes off. I can't see the photo on the camera, but I can see the photo if I put the SD card into my computer. Please


Displays all white because all the color screen have RGB mode if any of mode's are not work correctlly it's mean's color chip was fail and not working. u have to repair ur camera and change ur display screen. ... Kodak EasyShare V570 Digital Camera

My Kodak EasyShare C142 keeps telling me that it cannot read the 2G memory card. I have had the same memory card since I bought the camera new 2 months ago I just took pics with it 2 days ago and when I powered it up today it is giving me an error saying that the memory card in "unreadable". I tried another card and the same thing. I checked the cards by putting them in a memory stick and both cards work fine. Can you please let me know if there is anything I can do to fix it? Thanks! Brad


My camera keeps telling me the internal memory is full ... Kodak EasyShare C142 Digital Camera

Card error I've just gotten back from a trip. When I turned my camera on, a Card Setup screen appears and my two choices are Power Off or Format. When I pull out the memory card and put into the memory card reader in my computer, it says that the disk must be formatted before it can be used. Have I really lost all 200+ pics from my trip or is there anything I can do to save them? Any help would be greatly appreciated!


Hi,\015\012\015\012Use a card reader connected to a PC to backup your photos and then reformat the memory card. ... Olympus D-545 Zoom Digital Camera

I hit Format in error and lost 200 -300 pictures I had just taken on holiday. I have tried the program Memory Card Recovery, but couldn't assign the camera to a lettered disk as required. The card couldn't be read on my computer either. The screen then indicated that the card was 'locked' whatever that means, and that there was 'a memory card error'. I hope you can help me. Thanks Power Shot A570 IS


I am afraid all is lost since FORMAT was used. That will erase all photos permanently ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5007 seconds