Having problems with your FUJIFILM FinePix HS10 / HS11 Digital Camera ?

The EVF is not working on my fuji fine pix HS10 it is switched on in the menu



Answers :

Hi,

It seems that the Electronic View Finder is not working in the Camera. The EVF can be turned OFF or ON by pressing the EVF/LCD button above the LCD monitor.
You can also check if the EVF/LCD AUTO Switch in the Setup Menu of the Camera is set to ON. If it is set to ON, then change it to OFF. The ON option is used to turn on the EVF automatically when you put your eyes near to the viewfinder. You can toggle between the EVF and LCD when the Auto switch option is turned to OFF by pressing the EVF/LCD button.
If the issue persists, try resetting the Camera by selecting the RESET option from the Setup menu of the Camera. Once in RESET option, select RESET ALL option.
This should resolve the issue.

Thanks for using FixYa.
Repair Help & Product Troubleshooting for FUJIFILM FinePix HS10 / HS11 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The EVF is not working on my fuji fine pix HS10 it is switched on in the menu


Hi,It seems that the Electronic View Finder is not working in the Camera. The EVF can be turned OFF or ON by pressing the EVF/LCD button above the LCD monitor. You can also check if the EVF/LCD AUTO Switch in the Setup ... FUJIFILM FinePix HS10 / HS11 Digital Camera

I have a Panasonic DMC-LX2 digital camera, I'm based in the UK. Has worked fine for a couple of years, but 2 weeks ago, when powered up, none of the buttons work. Screen is illuminated, lens emerges OK, mode-select dial still rotates and switches between modes, on/off switch and aspect switches OK, but shoot button, all 5 'menu group buttons, anti-shake button, display/LCD mode button, waste basket buttons', zoom in/out control and 4-way direction button all 100% non-functional. Card is being ac


I just got identical situation today, and I have no clue at all. However, I figure that the camera is actually working busy like someone is holding the "UP" button continuously. To see this, power on your camera at any mode except the "Scene mode". A ... Digital Cameras

Fuji fine pix xp30 flash not working.


... FUJIFILM FinePix XP30 Digital Camera

Hi, my fuji fine pix camera has absolutely no power, i need it tommorow night for a big family event and it wont work. When i try and use charge it also there are no lights etc indicating a charge. A few month back i got my bag wet and the camera was in there. The camera worked after that when it was dried out. Now it does not, is there anything i can try at home to get it to work ??? :/ thankyou.


If the camera got wet the way you described, it can run for days, weeks, and months, but even with your best efforts to dry it out, moisture still got in there and caused it to fail. I have worked on countless pieces over the years that ... Digital Cameras

Turned my fuji finepix camera on today and the screen remains white and I get no image of the scene in view. The batteries are fine and all the remaining functions such as menu items all work fine. The camera sounds exactly normal when it starts up but there is simply no image on either version of the viewfinder. Have replaced batteries and taken memory card out and in again.any help available please. Thanks


The iris may have stuck closed due to moisture or the CCD may be bad. Let it dry out for about a day if the iris is stuck. If you still can't get an image, then more likely the CCD is bad - take it in for repair. ... Fuji FinePix S5500 Digital Camera

Compatability? Hi, My new Sony DSC-W80 camera is not recognized by my computer (running Mac OX10.3.9).  The camera and cable are fine, since my PC has no problems.  The message on the camera reads "USB Mode Connecting... Switch on [MENU]".  WHen I go to the menu, it gives me different ways to connect to the computer, none of which work.  Any suggestions?


I set the USB to PictBridge mode (press home button, then main settings). Now iPhoto recognizes the camera and I can import photos. \015\012 ... Sony Cyber-shot DSC-W80 Digital Camera

My camera I have a Fuji fine pix camera and i bang it and the memory card don't wanna work..the camera works and everything else except the memory card...it keeps on saying memory card not initialized


Buy a new cheap mem card lol ... Fuji FinePix A350 Digital Camera

Power/lens Problems I'm having some power/lens problems with my camera. When I turn on the power in either the picture or video mode, the green light will turn on for a split second then turn off. The lens does not come out at all. However, when I try to turn it on with the picture viewer or in the menu it works just fine. When I start with the picture viewer and then switch to the camera it turns off. Thus it seems that whenever I want to take a picture or a movie the camera doesn't work.


It seems that the lense movement is jammed. Have you dropped the camera? just have a close look from the front side of the camera, does the lense assembly seems to be pressed or moved aside by some extra preassure? if no physical disalingment is vi ... Sony Cyber-Shot DSC-P72 Digital Camera

No Card My Fuji MX2900 has been working perfectly but when I switched it on the other day I have a No Card warning on the display, I have tried 2 other cards which were all working fine but all of them are now showing this No Card warning??? I cant take pics now or get any images on my display


... Fuji MX-2900 Zoom Digital Camera

My Fine pix A800 works fine and is fully powered up, but the lense does not retract wyhen I switch it off, making it impossible to store in the carry case.


The lens mechanism is jammed, try tapping it on the side a few times if that doesn't do it.. you might have to take it to a professional, I recommend agains opening these by yourself, they are a royal pain in the neck to put back together. ... Fuji Digital Cameras

My fuji fine pix z1's flash doesnt work. i dont even remember it worked ever. the pics are blurred most of the time


1) Check you're settings are all on "Auto".\015\0122) The button you press to take the photo is a 2 stage button. Press half way, if you're gentle you should feel a slight resistance. Pause at this stage, just for a moment to allow your camera ... Fuji FinePix Z1 Digital Camera

Hi, My pentax optio WP don't work anymore. When i switch it on, it stops after 5 seconds. If i start it in read mode (blue button pressed whil i switch it on), it works, but the menu button dont't work and displays a yellow lock on the top of the screen. If i switch it on with the menu btton pressed, it displays ver 1.00 before to stop after 5 seconds If i switch it on with the menu and the blue btton pressed, it displays ver 36, then xxx test xxx and v 866-76 , 1.0001 before to stop after 5 sec


Some of those buttons work in combination with the two dials (i.e., setting ISO and white balance, etc.). Hold a buttin down and user the knobs simoultaneously.If this is not the issue, please describe specifically which buttons are not workin. ... Pentax Digital Cameras

Fuji fine pix s7000 flash not working


Fuji F400 digital. When I switch the camera on to take a picture the picture on the screen is fuzzy and it will not take a picture. This is the second time it has happened and I am not happy at all. ... Fuji FinePix S7000 Digital Camera

Put a new fully charged battery in - the camera would lasted for a couple of minutes and then would not switch on. The battery works fine in an identical camera. Put in a second battery - that worked for a bit then started flashing battery problem and wouldn't switch on. 5 minutes later - it did switch on - lasted for a short time and then started flashing ERR 99, and then wouldn't switch on again. Battery works fine in an identical camera. 10 minutes later - started working again, but the Sigma


It is due to some kind of electrical contact failure. For more \015\012details and common causes of Err 99 read the following article:http://www.lensrentals.com/news/2008.12.31/canon-err99 ... Canon Digital Rebel XT / EOS 350D Digital Camera with EF-S 17-85mm IS Lens

Uploading pictures whenever i go to hook up my camera to the computer it comes up saying connecting to pictbridge device then a minute later says enable printer to connect and underneath says switch on menu then i do that and all it does is come up with usb connect......do i need to change it from pictbridge to ptp or mass storage or what? i dont know what just happened..its worked fine for me every other time


Mass storage is easier, in my opinion. In that mode, when you hook the camera up to the computer, it will show up as a device in My Computer. Then you can just access your pictures there. ... Sony Cyber-Shot DSC-S500 Digital Camera

Lumix tz3 Please turn camera off and then on again" as soon as camera is switched on. I Can view any menu, or read SD card, but cannot take any pictures. If I turn on in a picture taking mode it starts to focus and then the message appears, when I turn it off the lens does not close. If I turn on in playback mode, it works fine, if I turn it off from playback mode, then the lens closes. Basically, any picture taking mode triggers the error message. Solution?


Low battery maybe? Try holding camera firmly in one hand, with camera on and in record mode, and strike in on its edge firmly on the heal of your other hand. This technique is often sucessful with temporary camer 'quirks' like freezing, lens not full ... Panasonic Lumix DMC-TZ3 Digital Camera

How can i fix my cam i have a Fuji fine pix F10....where it reads card error and when i do formatting my cam it does not work then it reads card not initialized what is it means?is my camera hd malfunctioned or my memory card.....is it ther another hope to fix this? please answer me....URGENT..


Hi there remove the card and and use the camera memory for photography. If you success then format the memory card from computer. Make sure there is no virus in your card or computer. After that fix it back and on the camera. I hope your problem will ... Fuji FinePix F10 Digital Camera

How can i fix my cam i have a Fuji fine pix F10....where it reads card error and when i do formatting my cam it does not work then it reads card not initialized what is it means?is my camera hd malfunctioned or my memory card.....is it ther another hope to fix this? please answer me....URGENT..


Just try removing the memory card and at the side you'll see a tiny switch,slide this in the opsite direction to where it is now and that should work. its a locking system on the memory card, it sometimes gets moved when we remove the card form the c ... Fuji FinePix F10 Digital Camera

Hi i have a fuji 9600. it worked fine untill today ehen i switch it on i get message: focus error.


The lens is getting jammed ....see if anything is coming in its way while opening up ..... like the lens cap or your hand ..... if not then there is a problem with the control gear set which intializes the lens ..... its a repairmans job ... Fuji Digital Cameras

I have a Pentax Optio E60. Everything has been fine until recently it has a blank screen in capture mode: no picture, no access to MODE or MENU. It will still take a picture but you have to switch to playback to see if it worked. Any ideas?


The issue is the CCD imager inside is what fouled up on you. The CCD is what puts the image on the output display.\015\012\015\012The other thing it could be is the lcd display itself\015\012take a flash light and point it at the di ... Digital Cameras

About seven days ago bought shelf display Fujifilm S1000. Worked fine at the store. Got home, read instructions, powered up, lens would not extend, "zoom error" displayed. Camera was room temp. When switched on, camera beeps, extend motor clicks, sounds like a gear engages for a split second. Took back to store next evening, it worked fine. Next try at home, same problem. Back to store, worked fine. Tried at home and at work, still "zoom error". Again to store, worked fine. Ready to return, stil


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a p ... Fuji FinePix S1000FD Digital Camera

My D70 (which I just bought on ebay) is having problems with AF. At time the AF works fine but then for no reason it refuses to work for hours to days. I have two bodies so I can swap lenses to see that its not the lens. If I switch to manual focus, it the camera works fine. I can see the little pins around the lens fitting retract when I switch the camera to manual. Seems like a problem with the internals that control AF. No other problems are apparent to me. Any suggestions?


Sounds like a contact issue - either they are not making consistently or they are just dirty. I'd start with a good contact cleaner (Radio Shack or photo store) and spray the snot out of both the camera contacts and lense (making VERY sure to protec ... Nikon D70s Digital Camera

Menu Problem I can take photo's fine, and i get my normal preview on the LCD but when i push the menu button or try play back my images - nothing happens. In fact every button except the wheel/power on off and the "take photo" button is not working??? Nothing i press will work except to take pictures? help! It is brand new, got it two weeks ago and everything was working fine. And nothing happened to it, and i changed nothing.


Did you try calling Canon tech support or returning to retailer if the camera is really not functioning properly this soon after purchase, I'd try returning it once all troubleshooting issues have not resolved the issue.\015\012\015\012Ho ... Canon EOS 400D / Rebel XTi Digital Camera

This camera was working fine, was turned off, and then a day later wouldn't work. The LCD screen on back works only if the Mode Switch is in the review mode (or DOWN), and does not light up under the picture taking mode (or UP) position. Also, while the switch is in the UP position, the ON/OFF power indicator button no longer stays lit. It does, however, stay lit in the Mode Switch in the DOWN position. First problem in three years. Nice little camera.


You may need to take it in to get it serviced or ntry out thees sights on the webhttp://software.canon-europe.com/ ... Canon PowerShot A520 Digital Camera

I have a Canon XM3 camcorder. It has given me many years of good service. Recently it has developed a fault. When I switch it onto Camera mode, and then flip the switch to Standby, the small screen flickers blue for a short time, but it does not show the image from the lens. If I switch off, and sitch to Playback, the small screen works OK and all the Playback works fine. Sometimes when I switch to Camera, and Standby, the small screen flickers blue, and then an image from the lens appears, but


Its the problem of CCD assembly\015\012CCD (image sensor) failures, particularly in conditions of high heat and humidity, led to cameras capturing images with either no picture at all, or with extreme distortion and se ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2587 seconds