Having problems with your FUJIFILM HS20 EXR Digital Camera ?

Fujifilm HS20EXR will not connect to computer with usb cable

\015 Windows cannot load software/driver for the camera\015

Answers :

Consider NOT connecting your camera to your computer.
The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program, such as Picasa.
Repair Help & Product Troubleshooting for FUJIFILM HS20 EXR Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Fujifilm HS20EXR will not connect to computer with usb cable


Consider NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or conn ... FUJIFILM HS20 EXR Digital Camera

My MAC cannot detect my Fujifilm Z33WP connected w the USB cable. I have connected the camera to the computer, restarted the computer and the camera to no avail. Any ideas???


I struggled with this problem for hours!!\015\012\015\012Ridiculously simple fix - open iPhoto! The camera then registers straight away! ... Agfa FUJIFILM FINEPIX Z33WP Digital Camera

USB connection The computer cannot access the Memory Stick® media in the camera when connected with the USB cable. I connect the camera to my computer using the USB, then after 10 seconds its says there is no device connected to the computer, and then it gives me option to cancel, retry, or continue but it usually connects automatically itself again. The only problem is that I can't do anything with pictures can't copy, delete, or view them. I'ce already tried to delete and reinstall the driver.


I would invest in a memory card reader. You can pick one up for under $20. Using a card reader allows you to avoid having to deal with drivers and such that may or may not be loaded on your PC. A card reader should work just fine for ya. Good luck ... Sony Cyber-shot DSC-W50 Digital Camera

For some reason now my computer wont recognise my canon powershot A560 -says something about connection.I use to get a window on view screen on my camera that i used to download pics onto computer via usb cable and now i only get a frozen picture on camera.Had usb cable and camera at camera shop today and they said usb cable ok as was connection in camera..Have tried all 5 usb ports on my computer..I have lost manual so cant remember exactly what im meant to do to download pics i dont really wan


Windows updates changes the registry and sometimes causes our "toys" to stop working. You can contact Microsoft and get instructions to re-write your registry(very dangerous if you don't know what you're doing) or, you can do what the pros do to avoi ... Canon PowerShot A560 Digital Camera

I have a Canon Power Shot A1000 IS camera (1yr.old) I was able to import pictures from the Canon to my computer with USB connection but I can not doeing it any more. My computer has got 4GB memory 1TB hard drive and Window 7 pro. When I connect the Canon (with USB cable) to the computer I receive a message ? Can not find source media for importing ?. When I use the canon with my friend's computer it does work but not with my one. When I connect my other cemera Sony DSC-F 707 to my computer tha


Every windows update changes the registry and sometimes causes our "toys" to stop being recognized. It happens to all of us. Pros avoid the problem by using card readers....you should too.\012 ... Canon Powershot A1000IS Digital Camera

My camera was working fine . I moved the computer to another room. This is the problem when I try to transfer pictures from the camera to the computer I get an error message stating that the software is unable to find The Olympus Digital camera connected to the USB Port on your computer. Well I have tried eveything. A new USB cable, reinsatlling the program. Moving the cable to all ports on the computer. I took the camera to a friends and we insatlled the program on his computer and it did the s


Try to get a external memory card. And try that instead. It might work better than the usb. ... Olympus Digital Cameras

Hello. So this is my problem: I have the CD's and the cable from my panasonic dmc fz18. I instaled the drivers from the cd but when I connect my camera to the pc nothing happens. On my computer I don't get the warning that I insert a USB cable and on my camera nothing happens. it like there is no cable in it. i can take pictures, record..do anything with the cable connected to my computer. It used to work.. Is there an option in the camera menu? maybe i did something in the menu..or mayb


Please downloaded it here :\012www2.panasonic.com/consumer-electronics/support\012\012 ... Panasonic Lumix DMC-FZ18K Digital Camera

I can't connect my Ixus 200 is canera to my computer ( XP 3 ), this has worked before. The camera isn't detected by any USB port. The USB ports work fine with other devices. I've also tried to connect to 2 diffrent computers. I've also tried with 2 diffrent USB cables


Consider NOT using the USB connection.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or ... Canon PowerShot SD980 IS / Digital IXUS 200 IS Digital Camera

Black screen When i bought a usb cable for my pentax s5i.. and connected it to the computer the screen suddely turned black, i thought that happened coz the computer is reading it but the computer wotn recognize it at all and even when the camera is not connected to the cable.. the screen is still black.. i tried taking the battery out and squeezing the camera but it still wont work.. it still takes pictures htough and the pictures are fine. Thanks for your help :)


... Pentax Optio S5i Digital Camera

When i try and connect my camera with the computer with the usb cable it says "the software is unable to find a olympus digital camera connected to a USB port on your computer". what do i do?


HiI would suggest using a card reader. No divers are needed for these if you use XP or Vista. There are advantages to this as well apart from not having to worry about camera compatibility etc. The pictures down load a lot quicker, you save wea ... Digital Cameras

Hello, I connected my DCR-HC54 (minidv) to computer using USB cable (come with camcorder). latest PMB is installed on windows 7 64-bit home premium. It gives following message: Cannot find the Handycam (Tape). Check the i.LINK connection to the Handycam. What to do? If USB cable is not used, why sony gives it with camcorder?


This type of camera usually downloads better with a Firewire (DV) connection. Sony call this "i.Link". Some mini-DV cameras only use the USB connection (if they have one) for stills and can only download video by Firewire. This is because you have to ... Digital Cameras

Can't see the camera from the computer. Everything works fine on the camera, but the USB connection doesn't work. It's like the usb driver chip failed.Put it on a linux machine, and can't see it from there either. I have reloaded the drivers several times. And it used to work on this computer. Other types of cameras work correctly with the same cable so it doesn't seem to be a cable problem. Does anybody fix these cameras?


Change the USB Configuration setting to Disk Drive in the Setup Menu. This allows the camera to appear as another disk drive on the computer so that you can easily copy the image files from the camera to the computer hard drive. ... VuPoint DC-ST300-VP Digital Camera

I've never had problems uploading pictures in the past, but when I connected my Samsung TL205 to the usb port, it continues to read connecting to computer but the computer does not recognize the camera. The arrow on the usb cable is lit up red instead of green like it should be. Any idea what is going on?


Pros avoid this problem by using a card reader. You should too.\012 ... Samsung DualView TL205 Digital Camera

I have a Fujifilm Fine Pix A340.When I tried to down load my pictures onto the computer a message came back that the usb port had experienced a sudden surge of power which has rendered the port unusable despite clicking on the reset message and now the usb cable will not go back in any of the ports.Do I need to buy a new cable? Or what can i do? Can I do anything with the computer?


... Digital Cameras

In order to put the pictures from the camera on the computer, I connect them with an USB cable. However,there is no connection signal. I tried it with a another USB cable, but the problem persisted. Battery is fully charged. The Nikon transfer program doesn't work. What could be a solution. Thanks, Wouter vanden Beld


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster t ... Nikon D80 Digital Camera with 18-135mm Lens

Power surge Hi, Everytime I connect my camera to my computer, the computer gives an error message saying a power surge has occurred on the USB port and so it disconnects the USB port. I bought a new cable to connect the camera thinking that might be the problem but I still got the same error message. Hope you can help!


... Pentax Optio S40 Digital Camera

Hi there. I am having a problem connecting my Canon Powershot A630 camera to my computer. My computer is running Windows XP and I have installed the software that came with the camera. When I connect the camera to the computer via USB cable the computer says "Found new hardware - Canon Digital Camera" and then the "Welcome to the Found New Hardware Wizard" opens up. It says Windows will search for current and updated software and then tells me to insert the Compact Disk labeled Windows XP Profes


Hi there,If\015\012 you want to download the pictures on your camera, try plugging it into \015\012the usb port of your computer using the usb cable. Then turn on the \015\012camera and make sure it is set to REVIEW MODE. Usually, ... Canon PowerShot A630 Digital Camera

When I connect my camera to my computer, I hook it up using an USB cable. This links the camera to the computer. But when I ask the computer to download the pictures, it says "camera in use please try again later". But the camere is not in use the screen just reads "USB". And I have to turn the camera on to get the computer to realize its there.


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Fuji FinePix S1000FD Digital Camera

The thing is that it doesn't connect to the pc. I am using windows xp and followed every instruction to make the connection... But when i get connected whith the usb cable the computer does not recognice the Camcorder FS200. Also i have allready put the serial number in the computer... What can i do to get connected?


Use a card reader instead of the camera. ... Digital Cameras

Camera Help! I've had the JVC dual mode GC-A33 camera since it's been out which was awhile ago. My problem is this: I've gotten a new computer since then and I've had pictures on this camera for a few years now. I recently found this old thing after moving. I downloaded the software. I connected the camera via USB connection. I hit the tranfer button and it gives me a little something that says: Connection failed. Please check that 1) The camera is on, and set to PC mode 2) The USB cable is conn


When it's plugged in, are you remembering to press the little (M) button to switch it to PC mode? If so, you might need to install the camera device. Go into your Control Panel and follow the steps under the Scanners and Cameras tab.\015\012 ... JVC GC-A33 Digital Camera

Camera Help! I've had the JVC dual mode GC-A33 camera since it's been out which was awhile ago. My problem is this: I've gotten a new computer since then and I've had pictures on this camera for a few years now. I recently found this old thing after moving. I downloaded the software. I connected the camera via USB connection. I hit the tranfer button and it gives me a little something that says: Connection failed. Please check that 1) The camera is on, and set to PC mode 2) The USB cable is conn


1. Remove the software- Windows does not need it. 2. Check the batteries are fresh in the camera. 3. Try another lead.4. if the Memory card is removable- try it in a card reader.---------------------------------------- ... Praktica DCZ3.2S Digital Camera

Any time I connect the usb cable camera to computer, the notice: "New hardware found.." appear on screen. After install, some times the computer freezes but mostly nothig happens: No camera, no usb disk (from My PC), nothing. At Control Panel-> System-> Hardware says USB Still Digital Camera with interrogation mark. When I try to reinstall the driver, the program don't find ANY driver, even at Camera intallation CD or at folder with the downloaded driver from Digital Blue. At the little screen o


Please get it here :\012www.drivershq.com/driver-update/digital-camera/disney/\012\012\012Regards, ... Disney Pix Micro Digital Camera

Connecting problem After connecting the USB cable to the computer and the button is pressed, it says: connecting to computer, but it doesn't happen. The green light on the camera blinks and repeats blinking, but nothing happens. Using Vista and initially, the spinning circle appears but nothing happens. Used installation disc but it does not download, in that when we go to cameras & printers on our control panel, the printer shows, but the camera doesn't. We were able to download pictures at one


... Samsung Digimax D53 Digital Camera

My Fuji 1500s 10 Mp camera will now power on when USB cable is connected. As per the upload instructions on the monitor, I am to plus the USB cable into my computer, then into the camera, then power on the camera. At which time the upload to Finepix Viewer should commence. BUT it doesn't. I unplug the camera, then have to open and reclose the battery door before I can get the camera to power on without the cable. This causes me not to be able to upload my pix. ANY suggestions would be fab!!!


You need to turn on the camera while plugged into the USB port. Then pull up the Windows Control Panel. Next go to Scanners and Camera Icon. You should find an icon there with the camera listed. Do a right click and check on Actions. You will then se ... Fuji FinePix S1000FD Digital Camera

I lost the cable from the camera's digital connection to the computer's USB connection. How/where can I re-order a new cable and how muchdoes it cost?


All the cable is a mini usb port ... Canon PowerShot G2 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1645 seconds