Having problems with your Fujitsu Digital Cameras ?

My finepix 3800 camera lens ring is disconnected from the camera body. it attaches to the camera body with 3 screws. the screws enter from inside the camera and screw into the lens. How do I attach?? thx Al


Answers :

You need to remove the silver or black trim ring from the cameras lens barrel by\015\012pushing the silver or black release button located next to the trim ring on the\015\012front of the camera. This exposes the bayonet mount. Find the index\015\012mark located on the outside of the adapter near the end that attaches\015\012to the camera. Line this mark up with the corresponding index mark on\015\012the camera front located just above the silver release button. Gently\015\012push the adapter onto the camera, then rotate it clockwise until it\015\012locks into place..
Repair Help & Product Troubleshooting for Fujitsu Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My finepix 3800 camera lens ring is disconnected from the camera body. it attaches to the camera body with 3 screws. the screws enter from inside the camera and screw into the lens. How do I attach?? thx Al


You need to remove the silver or black trim ring from the cameras lens barrel by\015\012pushing the silver or black release button located next to the trim ring on the\015\012front of the camera. This exposes the bayonet mount. Find the index\015\012 ... Fujitsu Digital Cameras

Lens adaptor I purchased a Phoenix 1300mm lens for my minolta cameras, maxxum 7d digital and analogue. The lens adaptor that was supplied with the lens has no cantacts and when attached to the body and the shutter release pressed, the camera indicates that there is no lens attached. The company that I purchased the lens from in Queensland Australia, and Phoenix themselves no longer seem to be in business so Ihave no results from them. The Phoenix lens is a screw mount looks like early Pentax but


The good news is that it is possible to get the camera to operate with the lens & adapter :-)The bad news is that you'll only be able to use it in manual mode :-(To get the camera(s) to actually fire, you will need to chan ... Konica Minolta Maxxum 7D / Dynax 7D Digital Camera

I have an older pair of zoom lense Bushnell binoculars, 40mm with 7 to 21 power. I used to have a cabin in a very humid, mildewy area of Florida and it seems that the mold (mildew) has found its way into the lens whereupon it really messes up the viewing. I took the end pieces off and cleaned the insides with camera lens cleaning items and that helped, but I think the eye pieces need to be removed to finish the job. How do you do that? I'm not sure they are screwed onto the body! Has anyo


I am not familiar with this make, nor with zoom binoculars in general, but for a normal binocular of traditional design, you can take the eyepieces off together, as a unit, by dismantling the focussing mechanism. This is likely to be complicated by t ... Digital Cameras

My canon xl-1 video fell and the screw in metal lens cap was dislocated from the lens housing. Inside, the lens is attached (soldered) to the cap by a bunch of color coded wiring. It can be repaired. But what is the matching order of the color coded wiring inside canon xl-1 16x zoom lens?


Hi,As i saw this Question since Jan, 10, i thought to give you some details. As no one seems to have a wiring for this Model, you could buy a Service Manual Online.I search and came across this site :-http://www.s1 ... Digital Cameras

When I attach a MC4 conversion lens to my 55-200 dx lens on my Nikon D40x camera body the camera has a hard time focusing and many times will not take the phote.


The camera is spec'd to autofocus with lenses that are f/5.6 and faster. The conversion lens is costing you two stops, so it's a wonder you're getting any autofocusing at all with a lens slower than f/2.8.Unfortunately, it's tough to try ... Nikon D40x Digital Camera

After having the f828 in my luggage the lens and the body are not tight together anymore. when i hold the lens with my left hand the body joggles left an right? can i unscrew the camera and tighten a screw to fix this?


I fixed that problem by tightening up screws but they were inside the lens turret swivel mechanism. This required some fairly major surgery to get to them and it was a bit intimidating. I carefully noted all the steps, took plenty of photos on the wa ... Sony Cyber-Shot DSC-F828 Digital Camera

I just came into possession of a Minolta Model SRT 102 Old camera. The camera has several lenses and one is attached-i dont know how to take the lens off the camera body, can anyone give me instructions to do this? thanks, Paul


I don't personally know this model. Do you see some little clips along the inside rim of the lens? On some cameras you simply push in the little clips and the lens comes off/on others you unscrew it. Is the lens on the camera a minolta? If not there ... Digital Cameras

I have a new Rebel xs kit, and after 20 shots, I got the err 99. I did all the above, that is from cleaning contacts to everything possible procedure mentioned in this forum. There are few things that I noticed. My err 99 is displayed with or without any lens attached, I did this to fault isolate the problem and it is on the camera body. It only happens when the camera is off, then on, and the first shot triggers error 99. With the camera on, I opened the battery cover and closed it. and surpris


\015\012\015\012\015\012\015\012I can help you ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

Hi I have a Minolta 58mm 1.2 lens the later version with the waffley focus ring it had loose parts on the rear and there is a tiny spring the is attached to the underside of a black ring by a small screw the black ring has a inside facing rod. Where does the other end of that spring go ? there is another smaller spring that is attached to two posts but this in the one on the outer side. Assembly diagrams to re-assemble the last few components of the mount would be great. kevin


Guide to converting the legendary Minolta Rokkor PG 58mm f/1.21) Introduction \015\012The Minolta MC/MD register ... Digital Cameras

I have a Nikon D50 which I frequently interchanges lenses. My AF-S Nikkor 18-55mm lens has 3 plastic retention flanges attaching to the camera body, and two of these have broken off. Can this be repaired without me having to be without the lens for a long time? (Either by me or a local repair service?)


Without seeing pictures, I'd say you could TRY some plastic epoxy or some type of plastic-specific adhesive. i'm assuming you have the pieces that were broken off. otherwise, i'd say get a new lens...they are relatively reasonable used. ... Nikon D50 Digital Camera with Nikkor AF-S 18-55mm f/3.5-5.6G ED DX Lens

I have a zoom lens attached to the body. I dropped the camera onto the ground. Now the lens release will not work.


Sorry, it will require service repair. Contact your local photo shop, go back to where you bought it and have them help you with service warranty, or contact Nikon directly for service support. ... Nikon D40x Digital Camera

Dust Just got a panasonic fz18 you can look past the lens barrel straight into the camera body,nasty for getting dirt into it Can one install a couple of extension rings on the barrel housing and attach a filter to it to keep the camera clean Thanks Jan


I have a Panasonic FZ18 and the Lens is not interchangeable so why would one be removing the lens in the first place? ... Panasonic Lumix DMC-FZ18K Digital Camera

I have a EOS-650, 35mm film camera(not digital)body. I want to purchase a lens for it. I need to know what model number lens and type will be compatable for this camera body? There are several to choose from but only certain types of lens will work on this type camera body. Some examples are EF type and USM type. I do not want to purchase a lens that I will be over paying for or that will not work on this type of body or is not design for it all together.


I am sorry but everyone will give you an openion that may work for them and not you. You need to go to cam shop and test the lenses that fit in your cam and get all information that you need then go back on your net and shop for good prices, but as ... Digital Cameras

Lens error when trying to power on camera. no dirt in lens. lens extends buzzes retracts and turns and then repeats before fully retracting. Can see camera focusing while cycling and retracting. lens error appears on screen at end of cycle. tried tapping camera and lens body to dislodge dirt as well as compressed air on lens body without success. any ideas?


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Nikon Coolpix S210 Digital Camera

I JUST PURCHASED TWO ALMOST BRAND NEW - 1-120 MAMIYA C3 BODY, AND A 135MM MAMIYA EXCELLENT LENS AND ONE MAMIYA C220 BODY, AND ANOTHER 135MM SAME LENS AS FOR THE FIRST CAMERA. REGARDING BOTH GREAT BODIES =THE CUT OFF ON THE BODY OF BOTH CAMERAS, WHEN YOU ARE PHOTOGRAPHING, IN THE SCREEN, SHOWS TWO "CUT OFF LINES, SO THAT YOU ARE FORCED TO FIT YOUR SUBJECT WITHIN EITHER OF THE TWO LINES. VIEWING THE TOP LENS PART, I NEED THE EXACT LOCATION OF WHERE I ACTUALLY SHOOT "UNDER THE LOWER OF THE


... Mamiya Digital Cameras

I dropped my camera while it was on and the lens was extended. And I dropped it right on the lens. And now when I turn the camra off, the lens does not go back inside the camera. Everything else is fine, I can see the picture perfectly. It's just the lens that won't go back inside. How can I fix this myself without buying a new camera, or having to pay someone to fix it?


If the cams making grinding or crunching noise the lens housing gears are broke. repair usually not very economical. about 80% the cost of cam when you bought it. ... Casio Exilim EX-Z57 Digital Camera

The problem I'm having with my Sony DSC F828 is that the mobile lens has come loose from the body of the camera. There are no obvious screws visible that would stabilise it. I have read that it is a commin problem for this model. I would be grateful if you could help me find a solution. Should I take it in to get it fixed professionally or can I do it myself? thank you


Hi,\015\012I had the same problem. I have done a comprehensive repair which I have documented on my blogsite: http://howtheheckdididothat.blogs ... Sony Cyber-Shot DSC-F828 Digital Camera

Fuji S5000 camera problem....The battery door will not latch because the cheap plastic retaining nipples inside the battery box have worn down/or broken. Tape will not even hold door closed! The retainers on the hinged door are fine (naturally it's the body!) The retainers don't meet each other as one slides the door closed and the spring loading makes the door pop open. Can a person use machine screws and latches or what??? (Velcro?...probably like tape that won't hold)


Also see post:\015\012http://www.fixya.com/support/t1747423-fuji_finepix_s5000_battery_door\015\012OZwombat suggests a aluminum bar holdi ... Fuji FinePix S5000 Digital Camera

My Nikon D700 Camera is sometimes not recognizing my having a cpu lens (24-70 f2.8 & 105 Macro f2.8 VR) attached and giving me a the error as listed on user manual page 410 with F No lens attached, or non-CPU lens attached without specifying maximum aperture. Aperture shown in stops from maximum aperture. Aperture value will be displayed if maximum aperture is specified. Pages 210 ? 2 4 (blinks) Camera unable to focus using autofocus. Focus manually. Page 81


... Nikon D700 Digital Camera

I have a Panasonic Lumix digital camera model DMC-TZ3. It fell into a toilet 8 months ago. I know gross. Fell when the water was still clean.Camera seemed dead. Found it in my garage the other day and stuck the battery in it and it came to life and takes pictures. Problem is that the inside of the lens needs to be cleaned as the water dried inside and left it smudged. Camera shop wants $161.00 to clean it. A new camera of this model is on Amazon for same price. How do I get inside the len


For reparing estimates cost of camerahttp://www.advancecamera.com/repairthe link will help you to ... Digital Cameras

Kodak C875 digital camera, dirt inside lens problem. Is is possible for me to disassemble and clean the lens? Or is this something an expert should do? I had dropped the camera in a creek-- when it dried out, everything works fine, but there is dried dirt inside of the lens which creates a blurry spot in every photo. TIA. --Kay


I've just do this. Unfortunatly there isn't any service manual in Internet :(\015\012I did it on myself. Here are photos of disasseble:\015\012http ... Kodak EasyShare C875 Digital Camera

My lens on my kodak easyshare m580 digital camera is stuck open and as extended as it could be. i've dropped it and that's what made it do this. i cant turn my camera on or off but when it gets turned on the inside of the camera makes a rough noise and the lens wont go back inside.


... HP Photosmart MZ67 Digital Camera

Lens error, restart the camera. How to retart. The zoom lens projected is not getting back again When the camera was on, the zoom lens cameout and got struct and not going inside. we get a instruction as ''lens error, re start the camera'' W e dont know how to restart and tried but failed. we need solution. We are unable to use the camera.


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Digital Cameras

Hi, I have Nikon P90. From last week i am facing following problem. Whenever i switch on my camera for taking pic, everything starts but i get message on the screen " Lens Error (If lens cap is attached,turn the camera off, remove the lens cap,and the turn the camera on) The above error message is their despite i opend the shutter of the lens. Kindly help me to know the above problem.


Hi,Here is a tip that I wrote about How toget a Digital Camera Lens to work againSteps toRepair a Digital Camera Lens\012heatman101 ... Nikon D90 Digital Camera with 18-105mm lens

Optio M20 Camera: Press on/off button to power up camera, the camera opens the lens cover, turns on a red led inside the lens, cycles the lens out and back in,then makes about 5 little popping noises. The back screen shows Pentax Optio screen for a second, then then the screen displays the word Auto Picture in the center of the screen and Green Mode at the bottom and at the same time it cycles the lens out and in. And for a brief moment in the back ground of the screen you can see the picture st


I got it!!! on my cam i hold down the menu button at the same time power on, it will showup a " ver 1.00" and lens move a little maybe u have to do it 2 times but second time it should work ... Pentax Optio M20 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4475 seconds