Having problems with your GE A730 Digital Camera ?

HOW CAN I CONNECT MY A730 TO MY LAPTOP, IT SAY'S HERE I HAVE TO INSTALL THE HARDWARE FIRST?


Answers :

Connecting to a PC
\015\012By using the USB cable, you can transfer the aptured photos and videos to a PC.
\015\012
Follow the steps below to connect the camera to a PC.
1. Make sure both the camera and PC are turned on.
2. Connect one end of the supplied USB cable to the USB/AV OUT port on your camera.
3. Connect the other end of the cable to an available USB port on your PC.
\015\012b2cfabe.png\015\012
\015\012
\015\012Setting the USB mode
\015\012
Since the camera’s USB port can be set to
connect with either a PC or a Printer, the
following steps will allow you to ensure that the camera is correctly configured to connect
with a PC.
1. Press the menu button and use the Up/Down navigation buttons to select USB Connect, and then press the Right navigation button.
2. Use the Up/Down navigation buttons to select PC.
3. Press the func ok button to confirm the setting.
\015\012
\015\012a882c13.png\015\012Transferring files to your PC
\015\012The computer will automatically detect the camera as a removable drive. Double-click My Computer icon on the desktop to locate the removable drive and to copy the folders and files in the drive to a directory on
your PC as you would copy any typical folder.
Repair Help & Product Troubleshooting for GE A730 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

HOW CAN I CONNECT MY A730 TO MY LAPTOP, IT SAY'S HERE I HAVE TO INSTALL THE HARDWARE FIRST?


Connecting to a PC\015\012By using the USB cable, you can transfer the aptured photos and videos to a PC. \015\012Follow the steps below to connect the camera to a PC.1. Make sure both the camera and PC are turned on.2. ... GE A730 Digital Camera

PROBLEM CONNECTING A jvc gz-mg334hek hard disc camcorder to my computer, Software is installed ok. When camcorder is connected and powered up my compter says 'NEW HARDWARE DECTECTED'and starts the 'FOUND NEW HARWARE WIZZARD' after a brief attempt at connection the wizzard stops and says 'There was a problem installing your hardware , The Data is invalid' This means i cannot transfer any data from the camcorder to the pc or vice versa - Is there a solution to this.!!!


Hi sixthpistolI would try deinstall the software for the camera, then reinstall it, reboot then try the camcorder again. Be sure to install the software BEFORE plugging in the gear. I am more than happy to answer any other question ... JVC Digital Cameras

My camera will not connect to my laptop. I have had the camera for about 9 months and not had any problems with it before! Every time I plug the usb cable into the laptop the camera say " processing - computer connecting and then connection fail. I have un-installed and re-installed the software but to no avail. It simply doesn't seem to recognise the camera anymore. I have no idea why this is happening and it simply will not work. It is very frustrating. The troubleshooting section of the manua


Most of the time, Windows update is at fault. Pros avoid this problem by using a card reader for downloading their pics.\012 ... Pentax Optio M85 Digital Camera

Hi there. I am having a problem connecting my Canon Powershot A630 camera to my computer. My computer is running Windows XP and I have installed the software that came with the camera. When I connect the camera to the computer via USB cable the computer says "Found new hardware - Canon Digital Camera" and then the "Welcome to the Found New Hardware Wizard" opens up. It says Windows will search for current and updated software and then tells me to insert the Compact Disk labeled Windows XP Profes


Hi there,If\015\012 you want to download the pictures on your camera, try plugging it into \015\012the usb port of your computer using the usb cable. Then turn on the \015\012camera and make sure it is set to REVIEW MODE. Usually, ... Canon PowerShot A630 Digital Camera

I am trying to upload photos onto my laptop i have installed the disc and connected the usb to camera but it just says connecting computer - the green light is flashing but wont connect?


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Digital Cameras

I have a BENQ DC E800 camera and i've installed the driver in my BENQ Laptop but every time i hook my digital camera to my laptop it says unknown format and cannot be recognized and on my camera screen "connection failed".. please help.


When you installed the driver do you have connect the camera to laptop, if the laptop cant't find the camera be connect to laptop when you installed the driver it will failed.\015\012Else, as to save life of your camera, suggest that to use card read ... BenQ DC E300 Digital Camera

Any time I connect the usb cable camera to computer, the notice: "New hardware found.." appear on screen. After install, some times the computer freezes but mostly nothig happens: No camera, no usb disk (from My PC), nothing. At Control Panel-> System-> Hardware says USB Still Digital Camera with interrogation mark. When I try to reinstall the driver, the program don't find ANY driver, even at Camera intallation CD or at folder with the downloaded driver from Digital Blue. At the little screen o


Please get it here :\012www.drivershq.com/driver-update/digital-camera/disney/\012\012\012Regards, ... Disney Pix Micro Digital Camera

Hi i have a nikon coolpix L11 dg cam.. when i connect the camera to the comp.. i get a msg new hardware found... but later during the installation it says, drivers not found... and also i have downloaded the picture project cd completely on the system.. on picture project when i click transfer.. it shows not connected.. pls help me.. i have so many pics to transfer.


If you are using Windows 7 then that itself the problem. There is a work around though. You can remove the card from the camera and plug it into the card reader slot on your laptop so that you can just copy the pics like you do from a USB drive. Atle ... Nikon Coolpix L11 Digital Camera

Downloading Photos Im having problems downloading photos from my camera to my laptop. i have used the usb cord between laptop and camera and it seems to connect ok. I cant open Olympus media at all so i have tried opening by using explorer. It seems to pick up my first 20 or so photos but will not show the other 200 of them. I havent been able to transfer them accross at all i have even tried copy and paste but an error message keeps coming up saying that its the worng file name. The only thing


Remove the Olympus software.Let Windows find them with the Camera/Scanner Wizard.It is likely the laptop has not the memory resources to receive all the photos in one hit so try in batches of 10 or s ... Olympus Stylus 770 SW Digital Camera

Camera fufifilmF40fd connects to computer but computer cannot access pictures -Device manager Code 19 says cannot start this hardware device because its configuration information in the registry is incomplete or damaged, could not load driver software. It says when i check the driver that the best software driver is installed and up to date. problem code 00000013 date 21.6.06, 6.0.6001.18000. Any solutions?


Two things need to be done :\015\012\015\0121. Uninstall all the drivers of your camera installed by windows, from the device manager. After doing that use a registry defragmenting software to rectify the errors in the registry. ... Digital Cameras

I have a C-3030ZOOM. Had a HD failure and re-instaled CM 2.01 and updated to V2.3 that is running MS OS XP Pro. The computer is unable to recognize camera. When I connect the camer to PC via USB - I do not hear the "Bong" sound when new device is added. Going to Contol Panel to add devise, it says that drivers for device not installed (Code 28). Hardware update wizard cannot locate drivers. Loaded W2000 drivers. Rebooted PC. Started Olympus Master V2.3 and went to file to upload images from c


Presumably you downloaded this, extracted files and right clicked inf file and clicked install?\012Did you then reboot and try to connect the camera? Connect then switch camera on? ... Olympus Camedia C-3030 Zoom Digital Camera

I am using a USB cable, that came with the anon camera. I have connected the cable onto the connector (DC IN DIGITAL) and the other point onto my laptop. Do i need to first install the drivers?


First install the drivers, but in any case I strongly suggest to use a memory reader also because so you save the battery of the camera and you are not stuck with the camera software.Also... DC IN is only for the power and not to transfer data. ... Canon PowerShot A460 Digital Camera

I am unable to transfer pictures from my digital camera casio exilim ex-z700 to my laptop. Firstly it says, the USB is not recognised as it has malfunctioned and the camera displays connection problems. I have been able to transfer pictures with ease before. I am clueless now. Please help!


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Digital Cameras

I bought the Power Shot A580 Canon camera in Italy. I am actually in Ghana. I tried to download my photos on my Ghanaian laptop and it says it does not recognise the camera. I understand it must be installed first using the CD provided with the camera but I left the box, Cd and whatever else in Italy. Is there any chance to solve the problem without waiting to go back to Italy? tks.


Do what the pros do....use a separate card reader for downloading photos instead of the camera. Then, you don't need the software.\012 ... Canon PowerShot A580 Digital Camera

I have a new laptop that has vista on it. In the past I have used a desktop with no problems it used windows xp. I have installed software for my digital canon rebel xt and can go to those programs. When I connect my camera to download pictures I get the message "Found New Hardware". When I try to manually go to zoombrowser ex it will not allow me to download pictures. HELP


... Canon Digital Cameras

HP E327 camera is not responding when usb cable is connected. My WIA is stared and working, but nothing will read that my camera is connected, neither in Windows or Picasa or Photosmart Essential. When I try to install the E327 camera disc it won't let me install saying something is missing to complete install. Haven't a clue.


Some files r not able to get copied from your camera installation disc so the installation does not get completed.u will have to download the necessary software online to get it installed properly. ... HP Digital Cameras

Connection Error I'm having a hard time connecting my A730 Digital Camera to my PC. I tried the arcsoft installer as well as installing the is730 enu (an OS camera driver for Windows 98, 2000, and XP) and yet the camera is not being recognized by the PC. I also followed the instructions posted in the GE support website (including the FAQs and technical support advisory) and yet it still fails the connection. Please help... Thank you.


The Arcsoft CD will not help you as it is not a driver disc. No driver disc is needed. Sometimes the camera gives a false connection error message. The easiest way to tell if it is connected is to go to My Computer and see if any Removable Discs s ... GE A730 Digital Camera

My name is Chris and my wife just bought a Panasonic DMC-TZ5 digital camera. I was trying to install the hardware to my computer and have the installation disc. Everything is loaded onto my computer, but my computer consistently says that the "USB Device Not Recognized". I went to troubleshoot the problem and it says that "there are no drivers installed" in my USB port. I'm currently using Microsoft XP Professional. I'm running out of options. I'm not sure if my computer is compatible with


I use a memory card reader (about $15) to retrieve photos and toss the software that comes with the camera.\015\012\015\012Another possible solution would be to go to panisonic.com and download the latest software.\015\012\015 ... Digital Cameras

I cannot connect to my camera. I have installed the software but when i plug my camera in it says check the connection. This is the second camera i've tried, both say the same thing. My usb port is working properly.


Connect the camera and the push the switch by which u see the photos on the camera screen ... Canon Powershot A480 - Silver Digital Camera

Hi, I've just purchased a Pentax Optio S12 as a second camera (my first camera is a Pentax Optio S40). I'm trying to install the ACDsee software that came with the camera. I am familiar with this software as the 1st camera uses it (I already have a version on my computer) When I try to install it, I get an error message saying "Epson Scan cannot be started - do you want to open the troubleshooting assistant" If I say yes, the troubleshooting assistant opens (but there doesn't seem to be anything


... Aqua Pentax Optio S12 Digital Camera

(kadian) camera will not transfer pictures to my laptop . state not connected though camera is properly connected and installed. (laptop-windows vista)


I would never use my camera to transfer pix to computer. I would buy a (usb or other) card reader and save wear and tear on camera.\015\012~Thomas~ ... Nikon COOLPIX L3 Digital Camera

Connecting to my laptop


Here are the steps to take.1. Establish whether or not you have\015\012a connection between your camera/computer by going to your start\015\012button, control panel, system, hardware\015\012tab and device manager. The camera must be power ... Canon PowerShot S5 IS Digital Camera

Connecting to my laptop


Here are the steps to take.1. Establish whether or not you have\015\012a connection between your camera/computer by going to your start\015\012button, control panel, system, hardware\015\012tab and device manager. The camera must be power ... Canon PowerShot S51S Digital Camera

I have a sony handycam dcr-TRV70 and I have installed the the installation disk ver.1.5 image mixer and winASPI for win XP. I HAVE winXP,sp3.When i turn on the cam selector switch to VCR,WINxp "FOUND NEW HARDWARE" APPEARS but it doesn't recognize or complete installation since it can not find file:sony dv-vcr then it aborts and error message:can not install".I have the i-link IEEE 1395 CABLE CONNECTED BETWEEN THE CAM AND THE COMPUTER.i recently HAD A COMPUTER CRASH AND RESTORED-IMAGED to THE A


Http://www.tomshardware.com/forum/53160-5-vista-sony-handycam-firewire-problem\012\012\012When you downloaded SON ... Digital Cameras

Software Installation I recently went out and bought a Pentax Optio SV. It has 5.0 megapixels, and 4.0x zoom. Camera works fine, all that jazz, BUT its the connectivity issue. Pentax has a software that comes along with it that is obviously outdated by a longshot, and when i go to install this ACDSee for Pentax, I try to install but it just says I need Windows Media Player 7.1 or higher to continue, but i have windows media 10.0. Then, I thought i might be tricky and just insert the SD card into


Pentax camera creates an own folder at each inserted SD card. So, try to find your image and video files in the folder named 100PENTX.\015\012\015\012For example, my camera saves the shot images into folder:\015\012\015\012SD card:\\DCIM\\100PENTX. ... Pentax Optio SV Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1444 seconds