Having problems with your GE Digital Cameras ?

I dropped a GE E1040 while lens barrel extended; however, once the barrel retreated into the camera, I have not been able to use. I've recharged the battery, but the only message is "lens error". What can be done short of replacing camera or costly repair which would not be practical.


Answers :

Fixing a Lens Error on a Digital Camera
\012


\012

This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart camera". Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012

The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many cameras, and NEVER use a case for this very reason.
\012

A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012

Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012

The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012

Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012

Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012

Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012

Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012

Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in "no heat" setting, or sucking the gaps with a vacuum (careful with this one).
\012

Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012

Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012

Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.

Repair Help & Product Troubleshooting for GE Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I dropped a GE E1040 while lens barrel extended; however, once the barrel retreated into the camera, I have not been able to use. I've recharged the battery, but the only message is "lens error". What can be done short of replacing camera or costly repair which would not be practical.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... GE Digital Cameras

Lens barrel is stuck in the out position on my Canon Powershot SD1100 IS. Error message reads: "Lens error, restart camera". To my knowledge the camera has not been dropped and the barrel seems to be properly aligned. Any suggestions would be greatly appreciated. Thanks


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. O ... Canon PowerShot SD1100 IS Digital Camera

Nikon Coolpix s220...Lens Error. Camera was dropped from like 5 inches. Immediately received the error message screen. The lens is stuck all the way out...I have tried to do some of the above and while twisting the lens slightly got it to take pictures again, I think it may have done more damage because its still makes a buzzing noise when I turn it on and there is black on a portion of the screen like the cover is partially stuck (inside the camera).


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Nikon Coolpix 2200 Digital Camera

Lens Stuck My Lens is stuck on my Coolpix S200 and I'm getting the Lens Error message. I tried to push it back in like I read on here and it went partly in and now its completely jammed. I've only had my camera for about 4 months. Please help!! I'm hoping to fix it myself. i dropped my camera and now the lens wont come out. Everytime i turn on the camera it tells me to turn it off then on again. I've done it multiple times and it doesnt work. I tryed to push the lens in and out but it doesnt ma


YOU CANNOT REPAIR THIS SOPHISTICATED CAMERA YOURSELF!!\015\012I guess pushing the lens inside may have made the problem worse.\015\012I follow a rule- if you drop an electronic equipment and a problem occurs- it usually takes a profession ... Sony Cyber-shot DSC-S700 Digital Camera

I have the same problem with my Lumix DMC-TZ3 lens error states "Turn off camera and then turn back on" Though my lens tries to adjust then stops. The power stays on with the error message. Til I turn it off .The lens still does not retract. Now when I turn it back on the lens will do the same thing. I don't think its the lens. How would someone repair or replace firmware. Can it be done over the net?


Of course it's the lens. Try these:\012Fixing a Lens Error on a Digital Camera\012\012This has to be THE most ... Panasonic Lumix DMC-TZ3 Digital Camera

My Nikon coolpix S10 camera was dropped and now the screen only says "lens error". If it is not touched the function returns to normal (has done so twice), but now the screen only say that one message and you can't turn it off or do anything). When it was turned off again and then turned on after a series of clicking noise the screen only said "lens error" and does not allow any other options(even turning off). Any helpful ideas would be apprecited. Thank you!


Hi,try this out it worked for most of them who had a similar problem like urs:Gently tap it twice at the end of the camera to ur plam and it will work again.just tap it very lightly against the bottom of the camera holdi ... Digital Cameras

Camera felled to floor lens tries but cannot retract camera turns on and off fine, error message "lens error, restart camera" it appears that until lens can function properly and error message is resolved camera is inoperable.


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Canon PowerShot A630 Digital Camera

Lens error, restart cameraI turn on my camera, and I get an error message stating Lens error, restart camera, the lens is open and will not retract, I have removed the battery and tried to restart. It will not go beyond the lens error message


This is probably THE most common problem with digital cameras. Try these procedures. ... Canon PowerShot SD850 IS Digital Camera

Lens error, restart cameraI turn on my camera, and I get an error message stating Lens error, restart camera, the lens is open and will not retract, I have removed the battery and tried to restart. It will not go beyond the lens error message


Try these procedures. ... Canon PowerShot SD850 IS Digital Camera

Lens error my camera model is canon powershot SD770 is digital elph i dropped my camera and a message is displayed as lens error i tried to restart my camera and again the message is displayed as lens error please give me a solution sir please


I've had similar problems with various versions of this camera. Here's \015\012the fix, if all else fails. These are step-by-step instructions to take \015\012apart and fix the camera's lens error. \015\012http://johnsmouth.wordpress.com/2010/12/01/l ... Canon PowerShot SD770 IS / IXUS 85 Digital Camera

I have a small Panasonic Lumix DMC-TZ5 camera. After fully charging the battery I am all of then sudden getting this error message :"please turn camera off and then on again." When the camer is OFF the lens is extended and open. When I move the camera to ON the lens moves in to the closed position closes, then reopens, extends, tries to focus, is unable to and the error message appears "Please turn camera off and then on again" This cycle just repeats. The lens is able to extend it is not st


Hi,Checkout this tip about digital camera error messagesLens Errorfix for Digital Cameraheatman101 ... Panasonic Lumix DMC-FZ7 Digital Camera

Hi, I have Nikon P90. From last week i am facing following problem. Whenever i switch on my camera for taking pic, everything starts but i get message on the screen " Lens Error (If lens cap is attached,turn the camera off, remove the lens cap,and the turn the camera on) The above error message is their despite i opend the shutter of the lens. Kindly help me to know the above problem.


Hi,Here is a tip that I wrote about How toget a Digital Camera Lens to work againSteps toRepair a Digital Camera Lens\012heatman101 ... Nikon D90 Digital Camera with 18-105mm lens

I keep getting the message 'lens error, restart the camera" but have done that and nothing works, camera is effectively locked. It is a Canon powershot SX20IS


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon Digital Cameras

My camera lens barrel will not come out and the lens cap will not open. I can look at pictures already taken, but cannot take any pictures. No error message shows.


Reason is lens guide pin damaged & replacing is the final solution. But before that trey these.\012\012\012\012Hi there please follow the steps and let me know the result.\012\0121. Ensure batteries are fully charged & clean ... Sony Cyber-shot DSC-N1 Digital Camera

Canon sx200 is, lens error restart camera, after taking some pics I wanted to delete them, so after deleting one picture I've got black screen and the message "lens error restart camera" and the camera turn off by itself. And there is no way to operate the camera after restart because it's showing me the same message as above mentioned.


HelloThank you for using FixYa for your problemAlways check the batteries first but if is it still giving the same fault, your camera is faulty. It should be taken to an authorized repair centre for a repair ... Canon Digital Cameras

Lens error, restart camera is the error message I get when trying to turn on the camera. The lens will not fully extend and just starts to wiggle back and forth then I get the error message when the screeen gos black. help!


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. O ... Canon PowerShot S3 IS Digital Camera

Error message my nikon D -80 is flahing an error message. When i try to take a photograph i hear it cycle, but nothing is taken. The automatic focus does not work. I think i might have turned the camera off by accident while it was writing a photo to my card *sighs* I have tried removing the battery, a new card, remove and replace the lens, remove lens and clean contact, and talking very sweetly to the camrea. Nothing worked and the same messages is displayed when i turn the camera on. Any advic


This may be due to the aperture ring in your lens. Try the following:\015\012\015\0121. Turn off your camera\015\0122. Move the aperture ring clockwise then lock\015\0123. Turn on your camera and try again.\015\012 ... Nikon D80 Digital Camera with 18-135mm Lens

I have a Canon Power Shot SX120 IS camera. I turned it on and the lens open a portion of the way and I got an error message that say, "Lens Error Restart Camera". I put fresh batteries in it this morning and have only taken about 10 pic's. I turned the camera off and removed the batteries then replaced with new ones but I still get same message. Please advise if you can.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot SX100 IS Digital Camera

Error message I have a panasonic DMC-LC33 digital. A system error message would show the minute I turned it on. The lens would come out. Then within 4 seconds the lens would go back in. I tried the on/off several time but the results were the same. I put the camera away for later. When I tried it the other day, it would not even turn on. The batteries are fully charged. Help!!!!!! I need my camera for my work. hi expert i m suffring in this error on my panasonic DMC-LC33 when i switched on


Try \015\012\015\012Klomtrix trick this worked with my camera\015\012thanks klomtrix ... Panasonic Lumix DMC-LC33 Digital Camera

Lens error message on nikon coolpix L18 I purchased my Nikon L18 Cool Pix camera last September ('08). Last week when I turned it on, the lens extended fully, then retracted fully as I got a "lens error" message.'' PLEASE HELP! I don't want to replace this camera so soon.


Hi,When system control does not get lens initialize signal while extending it, then it try again by folding it and extending and still no required initialize signal then generate error and stop further functions.Please remove batter ... Nikon COOLPIX L18 Digital Camera

Upon turning on my camera the message 'lens error restart camera' appears against black screen. I've turned off the camera and have tried turning on again. Still same message. Prior to the above message, my camera displayed a message 'memory card error card locked' and I was not able to see view my photos. I took out the card to see if it was in a locked position to which it was not. Please help as I have vacation photos on this memory card!


Can't help with the camera- sounds like it has a fault.The photos, however, should be recoverable by putting the memory card into a card reader on a computer. ... Canon PowerShot SD1000 Digital Camera

Lens error, restart camera telephoto lens is stuck in zoom position and won't retract, so when i turn on camera, screens says "lens error, restart camera", but it won't restart...just keep coming up with same error message


Hello mnickoliThis is a fairly common error especially with the A560.This either means that something is jamming the lens , or that the\015\012lens sensor is faulty. This is a very , if not the most common problem\015\012with modern digit ... Canon PowerShot A560 Digital Camera

Lens error My zoom will not work. I can take pictures if I don't zoom, but as soon as I try to zoom in, the screen goes black, the camera beeps a few times and a message that says "lens error, restart camera". However, upon restarting the camera, nothing changes - it still won't zoom!. Also, when turning on the camera, when the lens first comes out...it sounds funny, like it is puttering. Help?


Powershot S3 IS: lens error message, lens juddering on startup but not \015\012coming out. Tried all tricks on internet without success, so decided to \015\012dismantle camera. Localised fault to optical position encoder on first \015\012transfer gea ... Canon PowerShot S3 IS Digital Camera

Lens error When the camera is switched on the lens does not open out and the lens cover does not open. The camera then displays a "lens error" message and suggests that the camera be restarted ten switches off. This happens repeatedly.


This is probably THE most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Canon PowerShot SD750 / IXUS 75 Digital Camera

Lens error CoolPix L11. I switch on the camera The lens comes out. A picture is shown for about 1 second. Then the message Lens Error is displayed. The lens is retracted. After 15 seconds or so the camera switches itself off. The camera was bought in USA as a gift for a friend in Sri Lanka. Not so easy to get a local repair - if this is at all possible anyway. What is your advice? Thanks James


Try the procedures in this tip. ... Nikon Coolpix 5700 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4636 seconds