Having problems with your General Electric A735 Digital Camera ?

When I turn the power on a screen pops up with the words "writr protect". Can you tell me how to turn that off, its a used camera w/out a manual. Thank you, Crystol


Answers :

Hi,
\015\012
\015\012You are getting the message becuase the memory card in the camera has it's write protection on. If you take the card out you should be able to slide the tab on the card to the unlocked position. That should solve your problem.
\015\012
\015\012Hope that helps, if it does please rate my help. Thanks
Repair Help & Product Troubleshooting for General Electric A735 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

When I turn the power on a screen pops up with the words "writr protect". Can you tell me how to turn that off, its a used camera w/out a manual. Thank you, Crystol


Hi,\015\012\015\012You are getting the message becuase the memory card in the camera has it's write protection on. If you take the card out you should be able to slide the tab on the card to the unlocked position. That should solve your p ... General Electric A735 Digital Camera

When I turn on my camera in camera mode, it says memory full. I go to the middle selection to delete some photos and the camera freezes. It won't go to menu, it won't go back to camera mode or video mode. It just freezes. I can't even turn it off unless I take out the batteries. It is a Concord 4363Z model. I think it has a reset button but I am not sure how to use it. I can't find my manual for this camera. Thanks.


Go online and google search for \015\012\015\012Concord Camera Eye-Q 4363z Digital Camera owner's manual. You should be able to download a copy fro ... Concord Camera Eye-Q 4363z Digital Camera

Kodak v610 camera (easy share) My 10 year son was using our v610 camera and the following error message E45 (please see user manual) appeared on the screen. We were unable to switch the camera off and therefore the shutter remained open. The shutter will only close if I remove and replace the battery and when I turn the camera back on the shutter remains open and the same error message returns. I have checked the manual and it doesn't mention this problem. thank you jane


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is t ... Kodak EasyShare V610 Digital Camera

Lense error- can hear lense trying to open, but lense does not come out of the camera body. This is weird because the camera was not dropped/hit/damaged. I used the camera to take night images of a rising moon. It took pics fine, but about an hour later when I tried to turn the camera on to review the pics, I got the lense error as noted above. 4 days later, same problem. The manual doesn't have any troubleshooting for this problem. Any suggestions? Anyone.....? Thanks for your time!


Here is an excellent article that will give you five safe ways to help resolve the problem. I have heard the solution using canned air works well. That's solution #5 in this article.\015\012\015\012 ... Nikon COOLPIX P80 Digital Camera

Same problem "Hello pros I need help. The lens on my digimax cyber 530 will not close(retract) completely when I turn off the camera. When I turn it on it gives a 'whirr ing' sound and then auto shuts off. Out of desperation I have manually 'pulled' out the lens. it stays that way until i turn it off and it retracts only halfway. Can anyone help this senior? thank you kindly" I have the exact same problem with this person. And the solution you gave is not that useful,since I'd have to p


I had that problem too. you have done the right thing by pulling it out fully, but now you need to gently and i mean GENTLY push it back in. this should work\015\012\015\012bye ... Samsung Digimax D53 Digital Camera

My D40x is showing an error meassage when I switch the lens to autofocus. It reads; !Error Turn camera off then on again. My autofocus will NOT work with the two lenes I have for my camera,both AF-S. I have used some older lenes with this D40x on manual mode. They are for my Nikon FM. Do you have any ideas for me? Thank you.


Do you have the aperture ring turned to "A"? ... Nikon D40x Digital Camera

I have the FinePix z70. (I love it.) The manual tells how to set the date and time the first time you turn on the camera, but my kids failed to do that when they first used it. How can I change the date and time now? Thanks!


Press MENU/OK to display the menu. Highlight the left tab. Select Setup (wrench icon). Use up/down to select "Date/Time".\012\012\012It's all in the "Setup Menu" section of the manual (page 83 in my copy). ... Fuji FinePix F470 Digital Camera

White screen Hello, I have a Fuji S5000 Digital Camera that has never caused me any problems. I was using both the movie and photo functions this afternoon when, all of a sudden, the EVF/LCD screen turned white. I have removed the batteries, turned the camera on and off and have reviewed the troubleshooting information in my manual. At this point, when the camera is turned on, all I see is a white screen. If I try to take a photo, the camera will take a picure, but when I go into playback


Join the club of many s5000 users.Your CCD is faulty.No DIY repair possible because no spares from Fuji available.A Fuji repair is not worth it. ... Fuji FinePix S5000 Digital Camera

About a week ago I turned on my Lumix TZ5 and in the screen displayed this message: "please turn camera off and then on again. I have taken the battery off and I have charged, but the message still displays. When I turn the camera on, the lens extends to the maximum but when I try to use the zoom the camera doesn?t respond. Then if I turn it off the lens stays out. Any idea? Thanks in advance. P.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\012\012\012\ ... Panasonic DMC-TZ5 Digital Camera

When I try to zoom in on my camera (a Sanyo VPC-E1090), it says "Lens Error: 0x2119" It used to say something similar to this when I turned it on, but I turned it off and on many times until it corrected it. But I don't know how to correct this problem or if it can be corrected. For background information, the camera is only a couple weeks old, and it has been mainly used at a camp and ranch where it is quite dusty. Thanks for the help.


... Sanyo Digital Cameras

I cannot turn the flash back on. When I push on the lightning bolt button nothing happens, the display shows the flash turned off. Is something wrong with the camera. I have not had it that long and just use the IA mode and I know it worked before; can I reset the camera back to factory settings? I tried all the other modes and was able to use in in C1 but then I was messing around with that and now won't work in that either. Thank you for your help.


... Panasonic Lumix DMC-FZ28 Digital Camera

Blurry pictures Using a point and shoot digital camera, it was set on night mode by mistake. Pictures turned out blurry. The snapshots were taken inside at night using flash in the camera. Probably because in night mode, camera was setting depth of field wrong. So using flash and set in night mode was the problem. But can anything be done to correct the blurry pictures taken in this situation?? Any software known to correct this problem? Thank's, Angela Sapp


Adobe photoshop might help. ... Casio Exilim EX-S600 Digital Camera

My camera won't stay on. It turns on and lens goes out and adjusts and then retracts in and camera turns off. I am in the process of taking it apart to figure it out but unless it is a problem of the screws needing to be tightened I don't know what to do next. Can you help me or refer me. I bought this camera used and really like it and want to keep it if I can. I have had so much trouble keeping digital cameras working. Thanks


The problem you are facing is most likely to be lens related. Perhaps it is not able to extend fully and hence retracing and turning off. The cause may be a mechanical obstruction. However before we try anything else, remove the battery hold for 1 mi ... Pentax Optio E30 Digital Camera

I bought the camera brand new 5 days ago. I've been using the memory card to take a few photos and a few videos with no problem. Now when I turn on the camera, it says,.. "out of memory", but the memory card is in. Nothing in the manual says anything about this. Help please..! I can't use the camera at all now.


Sounds like you may have taken at least one picture on the internal memory. You need to get rid of that for your card to work properly. With no card in the camera, go into the menu and find "format" and follow the on-screen instructions to erase the ... Nikon COOLPIX L20 Digital Camera

Overexposure I have owned my Fujifilm S5000 for about 2 1/2 years. It has worked perfectly until the last couple of months. I have always used the flash when the camera told me to. Recently, the camera has been overexposing inside pictures when I use the flash. If I don't use the flash, it underexposes the picture. Any suggestions...ideas? I have moved fairly recently and can't find my manual anywhere. Thanks, Laurie


The top of your cam should have a square button with a positive and negative sign. (I have the S5200, so it shouldn't be that different.) Hold that button down while pushing the button for "Macro" (the one with the little flower. On your LCD the n ... Fuji FinePix S5000 Digital Camera

When I turn on my Sony Cyber-shot DSC-T1 all I get is a blue screen that says "no file in this folder" The camera will not go into "camera mode" I have a brand new memory stick pro duo 1.0gb. I tried to upload the firmware but when I go to setup 2 (like the manual says) it does not give me the "version" prompt on the bottom. This camera was given to me used so I looked at the manual online.


There may be the issue with the CCD (image sensor device) of the Camera.Refer this article to confirm this:http: ... Sony Cyber-Shot DSC-T1 Digital Camera

When I put the memory card in the camera it says 'cannot read' it. How do I format the card? I know it has the right 'size' memory. The memory card I am using is the same one I used a few months ago and I saved the pictures I took to a computer and erased the pictures off the card. Now as soon as I turn the camera on it says 'This card cannot be read'. Im frustrated as there is nothing in the manual that seems to get my camera working again. I have only had it for a year. Please HELP!


Do not use the computer to erase the card. This is the reason your camera no longer recognizes the card. Now you need to format the card in the camera to get it to work properly. ... Digital Cameras

I have casio exilim ex-z50. It worked fine the last time i used it. I went to use it yesterday and when i powered it on it asked for a date & time reset. after i reset the time it turned off and would not turn back on. After charging it it would turn on, but with no display. The display is completely black and when i take a picture and retrieve it from the camera the picture is also completely black. any suggestions. thanks


Your problem may be due to weak/worn out batteries or corrosion on the\015\012battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything el ... Casio Exilim EX-Z50 Digital Camera

Instruction Manual I lost the instruction manual to my camera (haven't used it in ove 2 years now) and need a replacement. Where can I go onling and download it? My camera is a Panasonic, SD Video Camera, D-Snap, 2 mega pixels, f=4.5mm Thanks, Ken


You can download the operating instructions and warrenty info as well as get and additional info needed directly from panasonic :) here is the link hope this helps ... Panasonic D-snap SV-AS10S Digital Camera

I had my hp 635 user manual in another camera bag that was stolen. How can I get another user manual without printing the whole thing off the computer? Thanks for your help....i can't use the camera without the manual...i am tech challenged!!!


You may download a copy of the manual here. If you really must have it on paper, an office-supply store or a printshop can print and bind it for you. ... HP Photosmart 635 Digital Camera

Troubleshooting problems I have a canon powershot s60. I tried to take a picture earlier and the screen is completely white. The camera turns on, the battery is fully charged and there is nothing wrong with the digital card. THe camera wasn't dropped nor did it get wet. I keep trying to turn it off and on, but all I get is a white screen. No images. But there are 900 images on the camera card and i just used it this morning. Please help. Thanks, Shannon


Take a picture with the camera and download it. If the pictures also shows up white then this probably is a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's w ... Canon PowerShot S60 Digital Camera

Hi, My name is Agus Susilo, I'm from Indonesia. A few days ago, When I start to use my camera, I found no display on my camera. So that I can't take a picture. I have tried to turn off the camera then turn on again, but the problems always occurred. Kindly please inform me, How to fix the problem? That's all from me, thank you very much for your kind help before. Best regards, Agus Susilo


... Olympus FE-180 Digital Camera

BROKEN FLASH the flash on my samsung camera wont work, it will take a photo when i turn the flasg off but the red eye ( signalling the flas function is on ) just blinks but will not take the picture ?? helpppppppp !! read the manual with camera - not much use !! i can only take pictures during the day whilst the flash is turned off .


The chip set in your camera is damaged.you want to change it. ... Samsung NV10 Digital Camera

Hi, my Mustek dig. camera is not displaying anything. Having bought this about a year ago and not really using it, I don't remember if it came with a charger or just the USB cable. Anyway, I plugged in the USB cable and turned on the cam, but nothing popped out on my PC. The power button is still on (blue light) and does not turn off. But I still can not see anything - the cam is dark. Please let me know how I can start using it again. Thank you


Hi,\015\012Just tap on the sides of camera when you switch on it . There is definitely a loose contact between the screen and circuit board inside it . You confirm it to check that you are facing this problem due to bad connector . If you still ... Digital Cameras

Panasonic Lumix DMC-LZ2 Digital Camera Manuals & Guides I lost my camera manual How can I get one ? I'd like know how to operate it for ebay. Haven;t used it for a long time & forgot how to work it. Thanks Eileen


You can download a manual at the support section of the Panasonic website. ... Panasonic Lumix DMC-LZ2 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5097 seconds