Having problems with your General Electric A835 Digital Camera ?

Every time I turn on my ge A835 camera it says the battery is exhausted and automatically turns off. I have replaced it with two sets of batteries. Still does the same thing. Help


Answers :

Hi. Try using fully charged NiMh batteries. This batteries are recommended when using digital cameras.
Repair Help & Product Troubleshooting for General Electric A835 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Every time I turn on my ge A835 camera it says the battery is exhausted and automatically turns off. I have replaced it with two sets of batteries. Still does the same thing. Help


Hi. Try using fully charged NiMh batteries. This batteries are recommended when using digital cameras. ... General Electric A835 Digital Camera

Kodak easyshare z712IS. sounds like a typical problem but...I try to turn it on, lens only comes out a little bit, then it turns off. I replace the batteries and the set time and date comes on...I set time and date camera turns off. I CAN in fact view pictures in the gallery but as far as taking pictures....nothing.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Kodak EasyShare Z712 Digital Camera

I have a Canon G5 and am on my third set of rechargeable batteries (I bought an extra Canon rechargeable battery when I purchased the camera and then 2 Canon brand replacement batteries when the first 2 failed and then 2 off brand replacement batteries when the 2 Canon replacements would not work). The following has happened with each set of batteries: The original two Canon batteries. After about a year or so of perfect performance a day came, after getting a fully charged indication on b


Thank you for such a detailed description, wishing others would take your lead. To the problem camera designated batteries (other then AA rechargeable) have always been a bit of a sore spot for me because the user is compelled to purchase a specific ... Canon PowerShot G5 Digital Camera

FLASHES C:13:01 When I turned the camera on, I looked at monitor to take picture and was flashing C:13:01-wouldn't take a picture. Shut camera off, turned on and got two pictures off. That was it. By shutting camera off and on was able to get to the review setting and viewed the 80 pics. stored; that was yesterday. Today I get the c:13:01 code on each camera mode and review setting only shows the 2 pics from yesterday, then blue screen, though as I push the review button the on screen picture nu


OMG!!! If you still have the camera, try this. I read in one of these forums to spray a burst of brake cleaner in there and blow dry for a few seconds and believe it or not, it worked! That's after me taking it apart to make sure the connectors weren ... Sony Cyber-Shot DSC-P200 Digital Camera

Joystick not working. The cam turns on and prompts for date and time to be set. The only thing I can get it to do id to move the curser up and down. I can't slect anything to continue to set the date & time. I opened the cam and found that I can replace the button if I can find a replacement. Thank you.


To reset the date connect Camera to PC. Open Easyshare Software, Go to Tools and Select SYNC. This will usually set the Camera Time/Date to the PC Time and Date. I have the same problem,(DX7630) cannot Move to the Right or use the Enter on Joy Stick ... Kodak EasyShare DX7630 Digital Camera

When I turn on my Olympus FE-190 camera it shows the "card setup" screen with two choices: Power Off (highlighted) or Format, and gives a 3-ring alert sound. (It does this no matter what is set on the program dial: auto, guide, etc.) If I press OK to "set" with Power Off highlighted, it turns off. If I highlight format and press OK of course it warns me I'll be reformatting the XD card. When I attach the usb cable the screen on the camera shows PC highlighted but when I press OK it says "one mom


Fixed it by reseating the xD card. Voila! Back to normal. ... Olympus Digital Cameras

I changed the batteries in my Power Shot A720 IS recently when the low battery warning flashed, and had taken only two photos when the warning flashed again. I moved the mode switch to playback and the screen went dark "Change batteries now" appeared. I turned off the camera, set the mode switch to shooting, turned the camera back on and was able to take two more photos before the low battery warning returned and prevented any more picture taking. I purchased and installed new batteries and f


Hi, 1st you must use alkline bat or minimum 800 mhp bat....and if problem is not solved then cheak the bat cap and connection clean with aomthing,,,,If any thing else contact [email protected] ... Canon PowerShot A720 IS Digital Camera

Camera Frozen When I turn on my DMC-FX07 none of the buttons work. The zoom doesn't work, the menu button doesn't work, the flash settings dont work. It won't switch from current picture when in viewing mode. I have tried all the picture wheel settings and every one is frozen. I have trie pushing and holding every button and removing and replacing and recharging the battery several times. When I replace the battery the autofocus works but then it freezes (when in heart mode) with the backli


Hi,I tried Option No.1 successfully when my Panasonic DMC-FZ7K froze once:Option No1:1. Try turning the camera on with the battery inserted.2. Now remove the battery while the camera is on. ... Panasonic DMC-FX07 Digital Camera

Just opened a dxg538. i noticed when i turn the power off it does not come back on until i take out the 2 AAA batteries and put them back. according to the user manual when you replace worn out batteries the camera retains the date/time for three minutes but no matter how quickly i replace the AAA batteries i lose the time/date settings. can i replace the memory battery?


Hello there, that battery can definitely be replaced. However it is something that the manufacturer usually has to do. I am having a hard time locating the type of battery used internally, but please give DXG a call and they will tell you if it's p ... Digital Cameras

Drained Batteries I am having a battery problem with my A75, which is my first digital camera. The camera has gone through 2 sets of brand new alkaline batteries since I've had it. I have taken only two photos. I've mostly only turned it on a few times to fool around with it and to try to learn the different functions. The most recent batteries where drained after sitting in the camera for two weeks and taking no photos. Basically, brand new batteries drained after two weeks of no use. The Ca


I use professional $70k cameras for work and it's the same type of thing. If you're not using it, take the batteries out.\015\012\015\012With my A75 I have some energizer 2200mpa rechargeable AA's and the seem to last about a month or so. If I happ ... Canon PowerShot A75 Digital Camera

My Canon A460 says the Card is locked. The lock switch on the card is set to unlock. I have another camera with a similar card. Both cards work in the other camera. neither card will work in the A460 both say Card Locked. It must be something in the camera. I have tried the turn off remove card turn on take picture. No card message. Turn off replace either card and see Card Locked.


Back up your data first,thenyou reformat the memory card in the camera.i guess you have formatted the memory card in another device.canon cameras generally do not accept cards that have been formatted in another device.then sitch off the camera and r ... Canon PowerShot A75 Digital Camera

My V603 instantly shuts off after I turn it on. The lens expands out then automatically goes in and the camera turns off. I replaced the battery and I can set the date & time & review my favorites but as soon as I try to take a picture - it turns off. Any suggestions?


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Kodak EasyShare V603 Digital Camera

Blurred pictures My old batteries were replaced with two new sets of rechargeables. Both sets aren't up to speed. I take blurred pictures.


If this is digital camera then the batteries have nothing to do with blurry pictures, however replacing them could cause all of your settings to be changed back to factory default. Make sure you are in the camera's auto mode, this can be a switch of ... Canon PowerShot A60 Digital Camera

My Canon 5D mkI turns on ok, will focus, displays top and back, but it will not take a shot. I have two batteries, both which I have charged to full and tried (display shows full charge). I have also tried two seperate CF cards. I have tried cleaning all contacts. Still it won't take a photo. The shutter will work when I use the "clean sensor" function though. Also, I have reset all settings on the camera. Anyone know why the camera isn't firing off a shot?


Hicould you tell me the amount of shot number when you put memory card in? If yes, please move to manual position from auto on the side of lens. And try to press release button.there is other one thing you have to chack selftime release working or n ... Canon EOS-5D Digital Camera

Every time I want to take a picture, I have to set the date or it goes back to 01-01-80. I replaced the (date) battery with CR1220 as instructed and put in the correct date. When I shut it off and turn it back on I have to set the date. HELP!


Ah-h-h, January 1, 1980....I remember that day. Whoops, I started to slip away!. Try pressing menu/set twice after you set the date and see if it sticks around this time. ... Canon PowerShot A400 Digital Camera

Pretty much constant but sometimes intermittant problem of the camera fe-210 screen goes black. all functions appear to be normal but it does not see through the lens. So everything is black on the pictures taken. It's like the opening is shut. Sometimes it will work when first turned on for one or maybe two exposures. then it goes black and may stay that way even if turned on and off or changing any of the settings.


Hi,Would you be able to View Recorded images / Video's ?If\015\012\015\012\015\012 yes, this is a Faulty CCD Sensor. This is a Common Problem on almost \015\012all the Brands like Sony, Kodak, Canon. There were Certain Recalls ... Olympus FE-210 Digital Camera

My new C182 camera downloaded our first set of photos okay, now I cannot get it to download our second set of photos ( taken a week later). I plug in the port to computer and camera, then turn on camera, nothing happens. Replaced the batteries with new ones.


If, after the first time you downloaded, you didn't use the "safely remove hardware"' function before disconnecting the camera, you may have corrupted the connection. You can always use a card reader for downloading. They work better anyway. ... Kodak Digital Cameras

Viewing panel I have a new Cybershot, (birthday present in May 06)and I have only used it on two occassions. However, I tried to use it a few days ago and came across a problem to wich I have yet to find a solution. Since, I turned the camera on the very first time everything has been set to the manufacture's suggestion and to automatic settings. This has never been changed! However, when I took a photo the other day the resulting image on the veiwing panel was so small I could not reall


Lies all lies!. first turn on your camera and check what resolution the images are set to record at. turn your camera to picture taking mode and press the trash button once. then you will see the available resolutions you can shoot at. i recomend 4M ... Sony Cyber-Shot DSC-S40 Digital Camera

Lcd screen is very light blue on one half and white on the other.Dividing the two sides is a black spot at the top of the screen and a fine verticle line. Also two fine blue horazontal lines near the bottom of white side. The camera was not dropped banged or left in extreme temps. It was working fine, was set down for about an hour and did not work the next time it was turned on.


... Fuji Digital Cameras

I'm not sure what is relevant and what isn't but... Two days ago I tried taking a picture on my timer and all of them came out blurry. I wasn't sure why this was so I started poking around on the camera and decided to reset all factory settings. Then that evening I tried to upload my pictures to my computer as usual. The software (Picasa) locked up. I tried taking the camera out of the cradle and turning it on but it wouldn't turn on. I rebooted my computer and tried turing the camera on


Sometimes a camera software upgrade will help, but it is hard to find software online. I first would look on manufacture's website to see if there is any driver updates you can download to your pc, then do the same with picasa software. Also make sur ... Digital Cameras

My D40 does not shut off properly, and sometimes turns on by itself. It seems to be getting worse, and sometimes I can only get it to turn off by putting the on/off switch in between the two settings. Also, sometimes if the camera gets left on I have trouble taking pictures the next time I go to use it (even if the battery is still charged).


Obviously something is wrong with the on-off switch. I would have it serviced. ... Nikon D40 Digital Camera with G-II 18-55mm Lens

With our panasonic DMC-LZ5, first we got a message saying replace batteries, which we did (with new ones). Now, the screen is all white with a message saying please turn camera off and then on again. We've tried several sets of batteries, and turned it off and on again. The picture of the battery is all in white, with a line through the middle. Any ideas on how to reset?


Http://www.fixya.com/support/t1100571-lumix_dmc_lz5_replace_battery ... Panasonic Digital Cameras

I have a Canon sd630.The camera works great except that it won't remember its settings. Upon turning on the camera,it would say it's in manual mode, but if I change it to automatic and then turn it off. It would be back in manual mode again. I have reset the camera and even taken apart to replaced the internal battery. Still no luck. Appreciate any help. f.y.i I have tried looking for a firmware update, but no luck either. I was wondering if I could flash my camera with the sd500 firmware? I ju


Try to follow the route up the circuit from the battery on the motherboard.\015\012maybe the battery is ok but the power not rich to the mother board or memory chip.\015\012take more attention on the connectors. ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

FujiFilm S5500 When I turn on camera all my settings are gone, presumably defaulted to factory setting. I guess the camera's internal battery is flat or otherwise dead. can I replace same, what is it. I have all manner of soldering irons, and drivers etc to fit almost anything with a screw. I appreciate it could be a ticklish job, but have spent years as an elec engineer with Fisons Scientific, so shouldn't be a problem. regards, chris catton


I'm sorry for the difficulties you're experiencing in using the Camera. According to the information available from the manufacturer, it appears that there is no such battery available to keep the date and time and other settings. Hence it is ... Digital Cameras

My Nikon Cool Pix L810 is brand new. Placed batteries in camera (that it came with) and it would not turn on after pushing on/off button. Replaced batteries with a new set and my camera still will not


I suggest you return the camera to the shop where you bought the camera for a replacement or warranty repair. If you try to fix it yourself you may void your warranty. ... Nikon COOLPIX Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2548 seconds