Having problems with your General Electric W1200 Digital Camera ?

When powered on the lens activates but doesn't open. Viewing screen dark. Able to adjust all setting except taking a picture.


Answers :

Fixing a Lens Error on a Digital Camera
\012


\012

This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart camera". Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012

The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012

A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012

Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012

The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012

Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012

Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012

Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012

Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012

Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in "no heat" setting, or sucking the gaps with a vacuum (careful with this one).
\012

Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012

Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012

Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.

Repair Help & Product Troubleshooting for General Electric W1200 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

When powered on the lens activates but doesn't open. Viewing screen dark. Able to adjust all setting except taking a picture.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... General Electric W1200 Digital Camera

Canon SD600 I used my camera to take pictures of fireworks and I noticed that afterwards, all the photos I was taking outside in daylight were turning white. If I take pictures in the dark, they turn out perfect, and low light pictures are fairly normal except anywhere where there is a light source (lamp, window, etc) the color is streaky and orange. This particular camera has no way to adjust the aperture settings and I am considering taking it to a shop to have it looked at. Is there anything


It sounds like you may be in a low light mode. Put the camera in record mode, and then press the set button (in the middle of the up down left right keys). You probably want the camera to be in automatic mode (or A). If this doesn't solve the prob ... Canon PowerShot SD600 Digital Camera

Lcd problems When I turn the camera on, the screen is very dark. I have tried all the settings on the camera to make it brighter but that hasn't worked. I am still able to take pictures and when I transfer them to the computer, they come out normal. I noticed earlier that the screen went brighter for a second and then turned dark again. I think there may be a problem with connection.


Hey amb151,\015\012 From how you describe the problem it sounds like you probably do have a connection problem, but the only way to really know is to have the camera looked at by an authorized service technician such as bringing the cam ... Kodak V803 Digital Camera

I have a Canon 1000d and it appears to take great pictures when viewed on the lcd screen or computer but when I get photos developed they appear to be a bit dark. The pictures are taken in auto mode. I have read somewhere that the factory settings need adjusting and it needs to be sent back. It is no longer under warranty. Has anyone else had this problem?


Reset the menus to factory setting or default settings. You can also try this: remove the battery and let it sit for at least 24 hours. This should reset all setting to default.Also you can adjust the settings in the menus to darken the pictures slig ... Canon Rebel XS / Eos 1000D Digital Camera with EF-S 18-55mm f& EF 75-300mm f Lens

I changed the batteries in my Power Shot A720 IS recently when the low battery warning flashed, and had taken only two photos when the warning flashed again. I moved the mode switch to playback and the screen went dark "Change batteries now" appeared. I turned off the camera, set the mode switch to shooting, turned the camera back on and was able to take two more photos before the low battery warning returned and prevented any more picture taking. I purchased and installed new batteries and f


Hi, 1st you must use alkline bat or minimum 800 mhp bat....and if problem is not solved then cheak the bat cap and connection clean with aomthing,,,,If any thing else contact [email protected] ... Canon PowerShot A720 IS Digital Camera

FLASHES C:13:01 When I turned the camera on, I looked at monitor to take picture and was flashing C:13:01-wouldn't take a picture. Shut camera off, turned on and got two pictures off. That was it. By shutting camera off and on was able to get to the review setting and viewed the 80 pics. stored; that was yesterday. Today I get the c:13:01 code on each camera mode and review setting only shows the 2 pics from yesterday, then blue screen, though as I push the review button the on screen picture nu


OMG!!! If you still have the camera, try this. I read in one of these forums to spray a burst of brake cleaner in there and blow dry for a few seconds and believe it or not, it worked! That's after me taking it apart to make sure the connectors weren ... Sony Cyber-Shot DSC-P200 Digital Camera

My screen is black on all setting EXCEPT "Digital Macro","Color accent," "Color swap." While the screen in black on these other settings, I can still take a picture. I just can't see what I'm trying to take a picture of when taking it. Please help.


... Canon PowerShot SD1100 IS Digital Camera

I am using a sony DSC-T1, when in the camera mode the screen is dark except for the numbers and dots that appear for camera operations. I can not take a picture of anything. I can review photos, when I do take a picture with the screen dark and I review I just get darkness.


CCD imager chip is defective in your Sony DSC-T1 camera that is why you see no image in lcd screen.Replace ccd imager chip to fix the camera problem. Local camera repair shop will help you to replace bad part if you have no experience of electr ... Sony Cyber-Shot DSC-T1 Digital Camera

Horizontal lines I have a Sony Cyber-shot DSC-W80.  When I look at the screen to take a picture, everything looks fine.  Video setting works fine too.  But, when I take a picture, there are horizontal lines all the way across the whole screen on every picture on every setting except the video as I already stated.  Please let me know what this means.  Thanks for your help.


HiIt sounds like the aperture in your lens is stuck open and the pictures are overexposed. Try a lower light setting, do the pictures look alright? If so it's the aperture, and the lens will need to be replaced. If the camera is still in ... Sony Cyber-shot DSC-W80 Digital Camera

Dark LCD I have an A70, about a year old. The problem is the LCD screen is very dark. It is almost completely black unless I point the camera dirrectly at light. If I take a picture with the viewfinder the picture is exactly what the LCD screen looks like. This happened as we were using the camera. I also cannot view any of the pictures in the camera. I no the display is not completly out because it works to access the menu screen. It wasn't droped or anything. I can't find any setting to change


I have a sony cybershot dsc w730 , since a year. The problem is that over 2-3 months the LCD screen has become very dark. It is almost completely black unless I point the camera dirrectly at light. If I take a picture, the picture is exactly what the ... Canon PowerShot A70 Digital Camera

Hello ,regarding my dx4530 camera , the camera turns on fine but the view screen is dark, almost as if the lens cap was on , the picture number along with the flash settings show on the screen but dark the background is dark. I can review old pictures. If I take a picture now they show up as blank. Any suggestions? Thanks in advance for any comments or solutions


You are having problem with the lens... you need to change the lens to get a bright picture... ... Kodak EasyShare DX4530 Digital Camera

I'm having problems with the settings on my Canon EOS 400D. When I take pictures in AV mode I can get quality pictures but in TV or M modes the pictures always come out so dark even when taking them outside in daylight. They are not coming back with a completely blank screen as I can see the outlines of the image. Even when I try different settings nothing improves the image.


You need to understand the relationship and teractivity of aperture, shutter speed and iso. In Av mod, you choose the aperture and the camera makes thw shutter speed agjustment, In Tv mode, you set the shutter speed and the camera makes the aperture ... Canon EOS 400D / Rebel XTi Digital Camera

When i turn the camera to take a photo, no image appears in the LCD or the eyepiece. this just happened all the sudden. I am able to view pictures that I've already taken in the LCD and the LCD will also give me the menus, picture count, everything that you would expect to see except the image that you want to take a picture of. i tried to take a picture, but the screen was just black as well. any and all help will be appreciated! thanks, mark


Just this week-end, i experienced something similar with my s5000. the playback function works correctly, however when you switch to'shoot' mode, the lens does not extend & there is no image on the screen. could this be a damaged CCD as well, or poss ... Fuji FinePix S5000 Digital Camera

Black screen Hi, I have Nikon coolpix S1 camera. Till last month, I was able to take pictures, but today, when I tried to take one, it showed black screen. The lens opens properly. I am able to see the images which were captured earlier, but, now, I am unable to capture any image because, everything is seen black. I reset all the settings, charged the battery fully, but no change.


Click here to read the web page for solution. It's free to fix. You need to scroll down the page, as it has many re ... Nikon Coolpix S1 Digital Camera

Canon Powershot A610 digital camera--LCD screen shows icons, but otherwise is blank--there is no visible movement in the lens when I take a picture without flash--have tried setting it on TV setting and taking a picture, then opening the battery cover for a few seconds after waiting 7 seconds or so, but no images on the LCD except the camera's icons--ideas? probably a stuck shutter, or is it still possibly the CCD sensor even though there's no visible movement in the lens? Ideas? Thanks!


Much more likely that it's a stuck shutter, especially for your model camera. How many tries did you give the fix? Some people stated that it took at least 15 repeated tries before the shutter opened:\015\012\015\012\015\012 ... Canon PowerShot A610 Digital Camera

Grainy Pictures I received this camera as a Christmas gift, this past Christmas, and I have not been able to get a decent photo from it yet. The indoor photos are very grainy with a bubble sometimes in the photo. Outdoor photos are too light and also grainy, especially when the zoom is used. I have tried adjusting the image quality and the ISO setting but neither of these adjustments have improved the quality of the pictures. The printed pictures look worse than the images on the LCD screen. I c


This camera with the ISO set to 100 ASA, the electronic zoom turned off, and with the mode on Automatic "A", should take very good pictures. \015\012\015\012I would give the camera to the manufacture for service, and include some samples ... Olympus Stylus 820 Digital Camera

COBRA DC6550 Cobra DC 6550 i JUST PURCHASED THIS CAMERA WHEN i GO TO SNAP A PICTURE ITS SO DARK i CANT FIGURE OUT IF IM EVEN TAKING A GOOD PICTURE , IS THERE SOME WAY TO ADJUST THE LIGHTING ON IT FOR INDOORS SO YOU CAN SEE WHAT YOU TAKING? I have had the same problems and did the same things the others did and I like the size of it and how simple it is but I hate not being able to see what I am taking a pic of and also how do you get it to save time and date. I always have to do all of that bef


Hi ill have a look now for you and let you know what you need to do ok bare with me for few minutes ok ... Cobra Digital DC6550 Digital Camera

My LCD screen is dark only when I am about to take a picture. I can not see what I am taking on the screen. All other settings, the screen works just fine. Help! Cannon PowerShot A80


Go to Settings and find "Preview" switch to "ON" ... Digital Cameras

When I use my SD790 in bright light the picture comes out dark now.. when I push the button to take the picture the screen goes from normal to dark. That is what the image ends up looking like ..DARK!! This is on Auto setting as well as manual. :( I love my camera but this is horrible! Missed a lot of good shots at Disneyland because it just would not work!!


... Canon PowerShot SD790 IS Digital Camera

Camera will not take pictures. Button at top of camera that you push will not activate the camera to take a picture. Is there a setting on the menu that might be able to fix this problem?


If there's no sign of life at all, either the batteries are dead or the camera is dead. ... Digital Cameras

I have an olympus U 740 model digital camera( 7.1 mega pixels, 5x optical zoom) the problem i face is that the screen becomes really dark when i take pictures during day light to the extent i have to guess and take the picture. However at night time i face no problem. Can u pls provide the solution to this. Do i need to change settings


SCREEN PROTECTORScreen Protector for Portable Devices Estimated Price: Under $10.00.\015\012The original use was for hand held portable gaming system however you can use this on digital camera LCD screens as well.You can't keep your ... Olympus Digital Cameras

My viewfinder went dark on me while taking pictures last night. The camera still takes pictures fine, but I can not see anything in the viewfinder. I see an 1842 on the screen when I first turn on the camera. Did a setting get changed when I swapped out the battery?


Think that you might have accidentally pressed the DISP or DISPLAY button on the back of your camera. This manually turns the LCD display on and off to save batteries. You would then use the optical viewfinder in its place. To turn the screen back on ... Canon PowerShot SD1000 Digital Camera

My Canon A75 cannot take pictures. Intially, a blurry purplish image would occur when taking a picture, now nothing comes into the image screen, except when the video setting is selected. In that case, a mostly white-purple image is seen.


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. ... Canon PowerShot A75 Digital Camera

My viewfinder went dark on me while taking pictures last night. The camera still takes pictures fine, but I can not see anything in the viewfinder. I see an 1842 on the screen when I first turn on the camera. Did a setting get changed when I swapped out the battery?


Have you tried pressing the DISP or DISPLAY button on the back of your camera. This manually turns the LCD display on and off to save batteries. You would then use the optical viewfinder in its place. To turn the screen back on, just press the DISP b ... Canon PowerShot SD1000 Digital Camera

White Screen Upon startup lens emerges but when screen appears it is white whereas it normally displays whatever the lens sees. When the shutter button is pressed the camera will focus and take a white picture which can be deleted. The camera does not flash although flash is set to automatic and photo taken in a dark room. Camera flashes (weakly) with flash set to manual on. Lens is unobstructed and appears to be perfectly normal. Camera was not dropped. Batteries have been changed.


\015\012Upon startup lens emerges but when screen appears it is white whereas it normally displays whatever the lens sees. When the shutter button is pressed the camera will focus and take a white pictur ... Pentax Optio E10 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3775 seconds