Having problems with your Genius Digital Cameras ?

Pc Cam How can I use my G-shotp611 as a webcam? It is not get installed on my pc,although its disk storage mode is working properly.


Answers :

This link may help u for this problem...http://www.techdigital.co.za/ProductInfo.aspx?productid=P611
Repair Help & Product Troubleshooting for Genius Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Pc Cam How can I use my G-shotp611 as a webcam? It is not get installed on my pc,although its disk storage mode is working properly.


This link may help u for this problem...http://www.techdigital.co.za/ProductInfo.aspx?productid=P611 ... Genius Digital Cameras

The usb port on the camera no longer works. I believe I unplugged it "hot". I've used it regularly for years but ever since unplugging it without ensuring it was properly "stopped" using the computer's "safely remove hardware" function three days ago, the camera is no longer recognized when I plug it in. The usb port still works on other detached items.I've tried to upgrade from the net and to reinstall the camera's usb driver from my install disk and in both instances I get the message it doesn


Hi there,\012Well you done most of the solutions......... anyway problem is most likely in your camera, you can try a last solution before going to repair it, remove the battery from your camera and turn it off for 24 hours (it helps you ... Olympus Camedia C-4000 Zoom Digital Camera

Hi.I use a mercury cyberpix S555V digicam(5 megapixel).I have windows 7 on my pc.I want 2 use it as a webcam on my pc & it supports the feature too.But even after installing its driver from the CD provided in the box,it does not detect the driver.Error message is "THE DRIVERS FOR THIS DEVICE ARE NOT INSTALLED ERROR CODE 28.My USB cable is perfectly fine as it works well while 'Mass Storage".Pl help me connect it as a webcam.It works as a webcam on XP but not on windows 7.Pl help.


Hello, please get the driver here :\012 Support">www.mercury-pc.com > Support \012\012www.opendrive ... Mercury Electronics CyberPix S-555V Digital Camera

My canon TX1 is about two years old. I recently went to use it and its not working properly. I can put it in play back mode manual mode or scn mode. As soon as I turn it to auto which I normally use the screen goes black and the power goes off although the lens does not retract. The battery is fully charged. Any suggestions?


... Canon PowerShot TX1 Digital Camera

I have a Konica Minolta Dimage Z6. The camera worked fine for a year. Got a System Error and now the Mode Button does not work. Can not shoot using the viewfinder and can not place the mode Button to look at photo's. Also am not able to format disk in camera.


I fixed my problem by removing the BATTERY then the MEMORY CARD which I replaced with an empty formatted memory card and replaced battery then connected Camera to my LAPTOP and on the LCD it was saying setting USB connection then with mode switch s ... Konica Minolta DiMAGE Z6 Digital Camera

I am having SONY DSC W80 7.2 MP camera. since long back it was not in operation. now to day when i using it its flash not working properly. sometimes flash works sometimes not, some times photo comes dark sometimes very bright even if it flash is on auto mode or in always on mode. kindly advise is it any setting problem or technical problem.


There is problem with flash unit.you have to replaced flash unit.if you know that how replaced then buy from your near service center and replaced by opening your camera.if do not know then best to replaced by sony service center. ... Sony Cyber-shot DSC-W80 Digital Camera

Have Nikon Coolpix 885 dig. camera, bought in 2000, still works OK. I had been transferring the photos to my old computer using "Nikon View" 5 version 5.0.0 software that came with the camera and my Windows XP operating system with no problems. I now have a new computer using Windows 7. This is my question: Will it be OK to install the original "Nikon View" 5 disk with Windows 7 or is there a newer "Nikon View" software to work with Windows 7 and my old Coolpix 885?


Nikon View has been superceded by Nikon Transfer and Nikon ViewNX (the transfer and cataloging/viewing\302\240functions have been separated). You can download\302\240the\302\240current versions of all (free) Nikon\302\240software fromhttp://su ... Nikon Digital Cameras

When I try to take a picture, it says memory full. But, when I try to look at the memory it says no file. I tried using the disk, installing software, formatting it.. Nothing works. The SD memory card is used, but has no pictures on it. Its driving me insane.


Format the SD card make sure the camera is set to place the new files on the SD card and not go to the internal memory. What I fully expect is the camera has defaulted to using the internal memory which is now full of files/pictures and needs to be s ... Vivitar ViviCam 8025 Digital Camera

I want to install a Picture project to transfer all of my picture from my camera to my computer..but the problem is i'm using windows seven and i cant use my Picture project disk coz its not working in windows seven. can u give a site or where i can find a driver of picture project that suits to my computer windows sevens...tahnks i will wait for the answers


Picture Project was retired years ago, replaced by Nikon Transfer and Nikon ViewNX. You can download the current versions of all (free) Nikon software from\012\012\012http://support.nikontech.com/app/answers/detail/a_id/61You might ... Nikon Coolpix L11 Digital Camera

HI I am using Intex IT 305 WC webcam and I lost the drivers. I have the install the same again. I am downloading from Brothersoft and rapidshare and even from Intex also. But after downloading, I am getting an error saying Video Capture hardware not found. I installed even Cam splitter also but of no use.So can anybody help me regarding this pls in getting my webcam working properly..Even mail can be sent on [email protected]


... Digital Cameras

I've switched from a PC to a Mac and have installed the G9 Solution Disk on my Mac, however it doesn't seem to be working, I can't download photos to my MacbookPro, nothing happens when I connect the camera to the computer. I have checked and the camera is in playback mode. The software looks like it installed successfully however when I try to run CameraWindow it runs forever basically doesn't start.


Use a card reader to download the pics to a folder you create on your desktop. From there, you should be able to import them to any program you wish...even iPhoto. ... Canon PowerShot G9 Digital Camera

Iam using KODAK EASY SHARE C43.When I inserted a 2GB micro SD memory card for the first time,it is saying 'Memory Card requires formatting' as usual.While clicking OK, It shows 'formatting.....' and then it says 'Memory Card requires formatting' again and again as before.....(I think the formatting function is not working properly in my camera).I cannot use an external storage space for the best experiance.What should I do ? Please help me....


The best thing would be to borrow a laptop or PC with a card slot, and format it there. \012If it continues to show error when formatting, the card is defective and should be replaced. (Returned?) \012Out of 5 memory devices I have bough ... Kodak EasyShare One Digital Camera

I bought a Shepr V001 clock camera and unable to use it as webcam. Inserted the CD in pc to install. No response I see on monitor neither mycomputer displays the pc camera option. It is working properly if I use it to see the recorded movies through USB from its memory card. Any solution for webcam usage please?


I have the driver files, can send them to you if you send me your email address ([email protected]). IN the meantime if you could tell me how to use the motion detect camera in the first place, i'd be grateful! I'm pressing the 'VidCamera' button but th ... Digital Cameras

I need help. I've used my memory card many times with no problems. Now I put it in my laptop and absolutely nothing happens. It shows under "Devices and Removable Storage" but nothing happens. Under its "Properties" it says "the device is working properly". The AutoPlay is set "Use AutoPlay for all media and devices" I've even tried-- •Follow these steps: 1.Click the Start button , click All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator.


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster t ... HP Photosmart M425 Digital Camera

Hello: My Fuji F30 recently started taking pics at 240 F2.8 regardless of light situations (with no flash selected) causing very overexposed pics. If flash is used, the pictures are correct. Also, it works properly in movie mode. Thanks for any advise, Ethan


What is the auto mode doing? could be a setting that you selected within the Menu? ... Fuji FinePix F30 Digital Camera

I have a powershot S410, new computer, newly installed canon digital camera solution disk ver. 17.1. when i try to open zoombrowserEx, get error: "cannot locate camera" or something similar. same program is in 2nd computer and use same USB cable to connect to camera and it all works perfectly. what to do?


Hi,Pls download and install WIA Driver 6.2.5 R4 for Windows XP WIP625.exeAdditionally, likewise download and install ZoomBrowser EX 6.1.1a Updater zb611upd-en.exe and ... Canon Digital Cameras

I am using windows xp and a logitech web cam ,with no install cd . How can I get the camera to work properly? It is Logitech Messenger V-UBC40 Quickcam?


Go to the support section of the Logitech website and download the software to your computer. ... Digital Cameras

I am using Canon 1000D dslr for more than 18months, it was working fine until last Sunday. I went outside and started taking few shots... it was not focusing properly (or should I say not at all!) and pictures are coming blurred. When I press the shutter button half, it should run the motor (in autofocus mode) and focus, but it is not doing anything (i.e. no red dots are coming)... what could be the problem? Thanks for any help.................


The autofocus motor could be be broken, or the lens may not be communicating correctly with the camera. One thing that can help if it's not communicating correctly is to clean the lens contacts. If you take the lens off, you should see some gold plat ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

Download Problems Have had my camera for just over a year and had no problems downloading my photos onto my PC using Windows XP until recently. When I connect the USB cable to the camera the message USB Mode Mass Storage no longer appears on the camera and nothing happens on PC. Have followed all advise in manual, changing the USB connection, disconnecting everything else on PC etc. Havre tried other cameras on PC and they are still working OK, have tried another lead but no difference, have


I HAVE THIS SAME PROBLEM WITH THE CAMERA! This happened to me after getting a new pc with windows xp -- I wasn't on xp before. ... Sony Cyber-shot DSC-W50 Digital Camera

- I can't use my C195 camera with Vista. I tried to download the software; a Kodak icon appeared on the C Drive but I can't download my pictures to the computer. - I try to download the Kodak software for the C195 camera on another computer which has the XP operating system, but it doesn't work either. My other camera of the Z series from Kodak is much more handy, because it has an installation disk and it's easy to download my pictures from that camera. Now. what shall I do with the C195 - Vi


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Kodak Digital Cameras

On my D50 the COMMAND DIAL has stopped working so shutter and apertrure cannot be set - but - normal photographs cxan be taken using 'AUTO' or MODE settings on the MODE DIAL. Only P,A,S,M modes cannot be used. Otherwise all functions of the camera work well and photo results are good. The camera has NOT been dropped or jarred.


I have the same issues. Let me know if you got an answer.\015\012Thanks, [email protected] ... Nikon D50 Digital Camera

I cannot turn the flash back on. When I push on the lightning bolt button nothing happens, the display shows the flash turned off. Is something wrong with the camera. I have not had it that long and just use the IA mode and I know it worked before; can I reset the camera back to factory settings? I tried all the other modes and was able to use in in C1 but then I was messing around with that and now won't work in that either. Thank you for your help.


... Panasonic Lumix DMC-FZ28 Digital Camera

I am new to the video world and just purchased a Canon HF S200 from a guy here locally it is used but looked to be in great condition and working properly. But less than 15 minutes after the purchase and only transporting the camera in my car, when I powered the camera on everthing seemed to work properly except the rotating LCD screen would not come on unless you turn it 180 degrees counter clockwise it comes on and works properly. If you start to turn it back it goes off again. When I turn the


Have you got the user manual? If not, you can download it from www.iusermanual.com.I am not familiar with you videocam but the mannual shows all of the buttons and functio ... Digital Cameras

I had purchased canon sx20is sevn days ago.it gives good services but one day a typical problems are arrised. zooming lever were not worked, menu optionn,set,display are not worked and also modes are not properly worked, in auto mode movie mode are activated. so i would like to get your sugession to solve these problem.


If this is a new camera and you are having so many problems in the first week, try to return it or, at least use the warranty to get the company to fix it. ... Canon PowerShot SX20 IS Digital Camera

Hi, I have a Pentax Optio WPI and using ACDC viewer. After upgrading on my computer at home it now says that the memory disk is not formatted and I cannot view pictures on my computer. I try to format the disk and it tries and then says it cannot. I put the card in a reader and it will not work either. The camera, disk and reader all work on my computer at work. I contacted Pentax and they said it was not a problem with the camera. Any thoughts on how to fix this on my home computer? Please hel


It is quite possible that your home system does have a virus in the system causing a registry issue. If possible use a good anti virus as the one at your work place and doa scan to trace out any malwares in the PC. You can also down load a registry c ... Pentax Optio S5i Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3674 seconds