Having problems with your HP Digital Cameras ?

My camera turns on then off then it shows the code m540-33


Answers :

Repair Help & Product Troubleshooting for HP Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My camera turns on then off then it shows the code m540-33


... HP Digital Cameras

FLASHES C:13:01 When I turned the camera on, I looked at monitor to take picture and was flashing C:13:01-wouldn't take a picture. Shut camera off, turned on and got two pictures off. That was it. By shutting camera off and on was able to get to the review setting and viewed the 80 pics. stored; that was yesterday. Today I get the c:13:01 code on each camera mode and review setting only shows the 2 pics from yesterday, then blue screen, though as I push the review button the on screen picture nu


OMG!!! If you still have the camera, try this. I read in one of these forums to spray a burst of brake cleaner in there and blow dry for a few seconds and believe it or not, it worked! That's after me taking it apart to make sure the connectors weren ... Sony Cyber-Shot DSC-P200 Digital Camera

WHEN YOU TURN ON THE M540-33 CAMERA, THE LENS COMES HALF WAY OUT AND GOES BACK IN. THE SCREAN SHOWS TO FIX TURN CAMERA OFF THEN BACK ON, BUT THIS DOES NOT FIX. IT WORKS SOMETIME, BUT VERY LITTLE. PLEASE TELL ME WHAT TO DO. MY E-MAIL ADDRESS IS [email protected] THANK YOU, R.D.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... HP Photosmart M525 Digital Camera

I have a Canon PowerShot SD790 IS. The camera turns on, the lens comes out and that's it. Then it shuts down and the code E16 shows up. Can't seem to find anything on that code that tells me what the problem is. The cameras only 18 months old. Can you help me?


The error message indicates an error that involves the lens unit or lens cover.\015\012 \015\012 \015\012 \015\012This error may appear where the lens is prevented from properly\015\012extending or retracting such as, f ... Canon PowerShot SD790 IS Digital Camera

There is an error code FE E which will not allow pics to be taken. It shows up when the camera is turned on and when look thru the view finder, it also shows in the bottom.


This is a Nikon SLR error for something is broken. Here is a link. http://www.loeki.tv/log/archives/85-FEE-error-on-Nikon-DSLR-fixed.html ... Digital Cameras

I slipped over while my camera was on and dropped it, when i turn it on it shows a blury vision and then turns to a red screen saying lens error code R740 - 033, how do i get it fixed so it works properly again?


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\012\012\012\ ... HP Photosmart R742 7.0 Megapixel Digital Camera

My Canon Powershot A460 shows Card Locked. The card switch is in the unlocked position. I have another camera. the card works in it. But the card from that camera also shows as Locked in the A460. I have tried the turn camera off and remove card, then turn camera on, then turn camera off and insert card. Both cards still shows Card Locked in the A460 and both work in the other camera


There is a lock lever inside the card slot. You could try to move it with something like a toothpick. ... Digital Cameras

Camera problem Hi. I have a Pentax Optio M20 Digital Camera. When I hit the on/off button, the camera turns on, the lens zooms out for a second and then back in, then it shows the "Pentax Optio M" load screen, then it shows "Auto Picture" in the center and a green dot in the bottom left with the words "EV Compensation" next to the dot. While it's showing this last screen, it beeps 3 times right before the lens zooms out again then back in just before the camera turns off. I have changed the batt


I got it!!! on my cam i hold down the menu button at the same time power on, it will showup a " ver 1.00" and lens move a little maybe u have to do it 2 times but second time it should work ... Pentax Optio M20 Digital Camera

Cannon powershot s2is camera, lense stuck open. I get beeps when I turn it on. Shows error code 18. Shuts off.


Lens errors (E18 errors on Canons) are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preve ... Canon Digital Cameras

Lens error When I turn the camera on it says "Lens error, restart camera," and turns itself off. When I turn it back on, the same problem occurs. The lens covers aren't completely closed, and the entire lens seems to be sticking out a little bit, like it didn't retract all the way. Please help! Thanks. Turn on the camera, camera shows a canon logo, then before turns off it said lens error, restart camera


\015\012\015\012I have a solution posted in doc "nikon s5 s6 lens cover error repair.doc"  uploaded on site http://www.esnips.com/web/papputatiyasStuff&n ... Digital Cameras

My camera is less than a year old but has recently been giving problems with the battery connection - I believe. The battery shows full and the camera works perfectly, then with no indication why the camera will not turn on. When left and then turned on later it sometimes works again, without the battery being charged in the meantime and with it again showing full. As I am going on holiday in 2 weeks I have not time to send it back to cannon under guarantee. Can you suggest anything I can check?


Check if your memory slot cover is properly closed... this doesn't turn on the camera....I had tough times, later found the cause... ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

Camera screen showing E50. Turn on camera, Blue screen showing with E50 on the screen. Camera will not turn off.


I just had the same problem with a different hello kitty camerea so maybe what i did will work for you. if there is a memory card in there take it out and then take out the batteries and put them back in and then it should be ok. I believe if there i ... Spectra Hello Kitty - KT7002 Digital Camera

Started having a problem turning on. When i first bought the camera you turned it on and it was instantly ready to take a photo and instantly showed what you were looking at on the lcd. Since i connected to a computer and transfered photos when i turn it on it the lcd stays black for about 20 seconds before it shows what the camera is pointing at and allows you take a photos, Any ideas how I can rectify this? thanks


Sounds like you didn't use the"safely remove hardware" function when you disconnected the camera from the computer and caused a slight problem in the camera. If your pics are safely on the computer, go into the camera menu and find "reset" and follow ... Kodak EasyShare M530 Digital Camera

My canon sx120 digital camera shows error code E41 only when plugged into any computer. The screen on the camera blanks out showing only the code when this problem occurs. But camera functions fine otherwise.


... Canon PowerShot SX120 IS Digital Camera

Turns Off Put new batteries in, took a picture and the picture didn't show up. Then the camera turned off. This happened once before but I forgot what I did to be able to use the camera. This time before it turned off the yellow light flashed on the back of the camera then the camera turned off.


Hey MaryKing,\015\012 I would first try taking out the batteries and waiting a couple of minutes and reinserting them, and if this doesn't work I would try a new set of batteries (battery manufacturers' sometimes do m ... Kodak EasyShare Z1275 Digital Camera

My camera's LCD screen doesn't show the picture on the screen when camera is turned on, however you can see the picture once you turn the camera off and just want to view the picture. Also, the camera won't keep the picture on the screen to view past pictures, and reverts to turning the camera on and the lens zooms out.


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Sony Cyber-shot DSC-W100 Digital Camera

Blurry images I purchased about a year ago a new Panasonic DMC-TZ4. And up until this point, I was in love with this camera. However, just recently, sometimes when I turn the camera on, the screen is showing images to be out of focus and blurry. All the settings are correct. Some times it stays like this for hours. Other times, I can turn the camera off and then back on and the blurriness goes away. Twice the camera has frozen and I had to take the battery out. And some times when I turn the cam


Sounds like a lens problem. If you've ever let the camera "auto turn-off" as a power-saving measure, any button pushed will turn it back on...even if it's in a case or your pocket. This puts strain on the lens as it tries to come out...result....lens ... Panasonic DMC-TZ4 Digital Camera

Two days ago, I took pics with my Samsung NV3. Pics showed up on the display just fine. I turned camera off, put it in a case and in my purse. Yesterday, the camera would not even turn on. I fully charged the battery and put it back in the camera. Still the camera won't even turn on. What's up?


One of the solder joint (contacts) inside the camera was probably defective and is not making contact anymore, therefore the camera is not starting.\015\012\015\012Check camera warranty status. If warranty is OK, then contact Samsung and have t ... Samsung NV3 Digital Camera

My camera turns on and then right back off. wen u press the power bottom the screen comes on and shows the Kodak label like its turning on and the lense begins to open but immideatly closes and the camera turns back off. i charged my camera all night but the problem persisted. the only thing i can think of is tht the day this happened i took my camera with me to the beach and it was warm but not extremely hot.


I had the same problem. This is how I fixed mine! Turn on camera grab the lens with two fingers before it can re-tract back into the camera and shut it self down. Use compressed air around the lens housing no more the 80 PSI. Hopefully t ... Kodak EASYSHARE M1063 Digital Camera

The lens doesn't open when we turn on the camera. The camera makes the sound of turning on and the LCD monitor lights up showing standard Optio display, but the lens don't open neither the zoom. After turning on, the Off button stops working and the only way to turn of the camera is by removing the battery.


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Pentax Optio 550 Digital Camera

When I turn on my Olympus FE-190 camera it shows the "card setup" screen with two choices: Power Off (highlighted) or Format, and gives a 3-ring alert sound. (It does this no matter what is set on the program dial: auto, guide, etc.) If I press OK to "set" with Power Off highlighted, it turns off. If I highlight format and press OK of course it warns me I'll be reformatting the XD card. When I attach the usb cable the screen on the camera shows PC highlighted but when I press OK it says "one mom


Fixed it by reseating the xD card. Voila! Back to normal. ... Olympus Digital Cameras

My camera turns on by itself even with the slide in front in the closed position. The screen then shows the warning that the lens cover is closed. When I open and reclose the lens cover in 10 or so seconds the camera turns itself back on and repeats with the lens cover closed warning. The only way for me to turn the camera off at this point is to remove the battery. Help!


Most likely some dirt, dust, or other particle is jamming the lens opening gears. You can try to spray some compressed air into the lens assembly, hopefully dislodging whatever is obstructing the lens cover. If this doesn't work, the camera wil ... Sony Cyber-shot DSC-T77 Digital Camera

My Sony cyber-shot lens keeps going in and out 3 times when I turn the camera on. Then "Turn the power off and on again" shows up on the viewer. It does this every time I turn the camera on. Bill (301) 996-1252 (cell) I am a realestate agent and need my camera. Thanks


Hi,Thanks for using Fixya.To resolve this issue, try out these things:-\015\012\015\0121.Take out the batteries and replace it with new one.\015\012\015\0122.If turning the power on and off again does not res ... Sony Digital Cameras

Camera shutdown I've had my Canon Powershot A85 for around 2 years. Around a few dats ago, I was showing friends pictures from a holiday to America, when it appeared the batteries had run out, but the lens never retracted, which it usually would do. I attempted to turn the camera on again, and it turned on for a split second, but i never thought to look at the screen for an error mesage, but it just turned off again. Nothing was spilled on the camera, and it wasn't dropped, or any other


Sounds like the fuse went bad in the camera, If you have no power on camera most likely thats what happened, This has to be fixed by repair tec, they have to touble shoot power board. ... Canon PowerShot A85 Digital Camera

MEMORY CARD I bought a memory card to my camera and when I incert it the camera have a rare sound and turn off. Every time I turn on the camera, show me a window to format it and if I press yes, do the sound and one more time turn off. The memory card is a Sandisk SD 2GB CARD. Please help me. Thanks. Send me a message at [email protected] Have a nice day


It happend with me .\015\012this camera was degined to use SD card by max 32 MB or may be less.unless there is a softwear to allow the cam to accept the bigger capicty like SD 1 or 2 GB ... BenQ DC3400 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4952 seconds