Having problems with your HP Photosmart R707 Digital Camera ?

I have replaced the battery in my R707 (twice) but it won't take pictures. The message says "charging flash" and locks up the camera. The only way I can turn it off is to attach it to the computer and then turn it off. We have a big wedding upcoming and I need the camera to work. Please advise what the problem is and how or where to have it fixed. Thanks in advance. Susan Gillen


Answers :

Here is a link to the HP support site, which you may already have read, but it gives specific instructions for performing a power reset of your camera, which is their preferred method for solving a problem such as the lock up you are experiencing...(click here)
If you have tried this, please try the camera without a memory card, and then with an alternate memory card if you have one available, rather than attempting to format the card you have been using.
Report back on the results with a comment to this post, please....
1.switch the camera off
2.take the battery and any memory cards out
3.press the end of a paperclip into a small hole (which you can see with the battery compartment open)
4.remove the paperclip after 10 seconds
5.put the battery and memory card back in and the problem should be sorted.

(HP TECHNITION)

Doing this will reset the camera.

If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!
Repair Help & Product Troubleshooting for HP Photosmart R707 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have replaced the battery in my R707 (twice) but it won't take pictures. The message says "charging flash" and locks up the camera. The only way I can turn it off is to attach it to the computer and then turn it off. We have a big wedding upcoming and I need the camera to work. Please advise what the problem is and how or where to have it fixed. Thanks in advance. Susan Gillen


Here is a link to the HP support site, which you may already have read, but it gives specific instructions for performing a power reset of your camera, which is their preferred method for solving a problem such as the lock up you are experiencing... ... HP Photosmart R707 Digital Camera

E18? Hi, folks!  I have an old Canon PowerShop s100 that displays the message "E18" when I try to turn it on.  Thoughts?  I'm going abroad tomorrow and really need a working camera!! Less pressingly, I no longer have the software that came with the camera, and I have a new Dell with Vista. I've been trying to download photos off my camera, but when I attach the camera to the computer, I'm asked to install driver software that I don't have.  Can you suggest a site to download Vista-compatible dri


E18 means that the lense is not coming out all the way it is a internal error it is going to have to be taken apart and the internal workings cleaned. for drivers sorry have know idea. ... Canon PowerShot S100 Digital Camera

Carnt download any pictures from my camera to the computer do i need to load the software for the camera to the computer or do i need to turn the wheel on the camera to a sertain setting the computer finds the camera but only a few pictures show up then just comes up error when you try and copy them


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster t ... Fuji FinePix A805 Digital Camera

The website says that all you need is a usb chord to connect your camcorder to your computer. But I don't have a usb chord that can attach from my JVC GR-SXM161 to the computer. Is there one that is sold somewhere? I really need to get a video file into computer or digital form to hand out in disks to participants.


There are many of these that sell fairly cheap. Check ebay and amazon.com or newegg.comYou can also use an sd card and transfer from camera to pc. ... Digital Cameras

Do I need a driver for my sanyo vpc 5885 digital camera because it won't download pictures to my computer via USB anymore. It turns on and then as soon as I push "set" for the PC the lense goes in and it shuts off. My computer had to be fixed and maybe this is why it won't work anymore? Do I need to install or download a new driver? Is there a driver via online or was there a CD that came with the camera?


... Digital Cameras

When turned on lense would only retract partially and then turn off. took it apart. I have it to where the camera will now go on, am able to take a photo (all normal) except I cannot get the lense to "attach" to the camera properly. Cylindrical lense. three screws protruding from it. not sure if the lense mounts on a black ring on the front or under the ring. The "in out" mechanism works but it will not grab the lense (cover?) to move out then retract. Seems to need to attach under the ring but


Good day,This is a common problem and sometimes can be fixed.Please see details on my tip on how to fix this error here:http://www.fixya.com ... HP Photosmart M415 Digital Camera

Ok this is really turning into a nightmare! i am trying to transfer my photos and videos from my camcorder to my computer. i was told to go by some cable connector and all my problems would be solved. my computer WILL NOT read my camera!! i need to know what it is that im doing wrong and what i need to do besides throw this camera out the window please! i will try and describe my camera as best as i can, JVC digital video camera mini dv. 32x optical zoom. MODEL# GR-D350U. any info would be great


Http://static.tigerdirect.com/pdf/jvc-grd350-manual.pdfRefer to page 33 of the manual. You will still need the correct software. I assume you ... JVC Digital Cameras

When I plug in my camera to the computer, instead of getting the two toned alert that indicates that the computer has recognized that new hardware has been attached to the computer, it makes a three tone alert. When I go to "my computer" the camera doesn't show up. But if I turn the camera off, the computer makes the two tone alert indicating that it recognizes that the hardware is uninstalled. What does this mean? I have been able to plug my camera in with no problems for the last four years s


If your goal is to get your pictures, try NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a ... Canon PowerShot A75 Digital Camera

I have a Nikon finepix s6000. I just got it for Christmas as a present. A week a go I turned the camera on and it turned itself off with the lens still sticking out. I googled and ordered a new battery, a fujifilm np-50 as recommended. My camera when the new battery was placed inside, turned on an worked but said it needed to be charged. It will not charge with my wall plug or the computer. I have tried different outlets. If I try to turn it on, the light turns blue, says USB then promptly low b


You should still be covered under the Nikon Factory Warranty. You can stop paying to try to fix this yourself by simply contacting Nikon and let the solve the problem for you. That is what they are paid to do - and this service is built int ... Digital Cameras

I want to connect to my computer. Kodak is installed. I attach by the proper cord and it will not turn on. As soon as I remove the cord the camera turns on


Consider NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer ... Kodak EasyShare M863 Digital Camera

I downloaded my pics into the computer and then it said battery needed so i put new batterys in and it would not turn on. so i put in 2 more batteries and they did not work. so i charged my batteries again and put them in it would not turn on , i checked to make sure i put the batteries in correct and i did. it will not turn on at all


Hi Kallie, I'll try to help you with this. It's possible that the battery terminals inside the camera are slightly oxidized, and not making good contact. This could also be the case with the on/off switch, but not likely. You can try to clean t ... Nikon COOLPIX L12 Digital Camera

Turn the power off and on again....this is what appeared after i download some pictures to my computer for the first time. When I do this the same words appear on the screen and I am unable to take any pictures When I turn on my Cybershot DCS W90, A message sayes 'turn the power off and on again' the lens does not open and I can't take photos but can see photos stored on memory card.... what do I need to do to fix this?


I have a Sony P32. Found the answer on another board'\015\012Hit the front of the camera where the lens is on carpet a couple of times. I jars the problem loose ... Sony Cyber-shot DSC-W100 Digital Camera

My camera is conected with a cable but when i turn it on my computer screen goes black and a lot of words come up as big as the computer screen then my computer restarts it self.can you tell me the problem as i can not ues my camera this as not appened before.many thanks


It's very hard to troubleshoot software problems online, and it likely is a software issue. But why put up with the headaches of bad software in the first place? Please see the following blog article, as it describes the use of a card reader as a muc ... Digital Cameras

I have a Panasonic DMC-FS20 and the joystick part has broken so I cannot view any pictures taken but more importantly cannot view any once I have attached the camera to my computer as you need to press it to allow the computer to recognise the USB connection. Is there any way to get around it so that I can still view my pictures on the computer without the use of the joystick?


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Panasonic Lumix DMC-FS20S Digital Camera

My camera, i think i was turning it off. And i was maybe holding the lense. Then it said lense errror. And now, everytime i try to turn it on, it says lens error restart camera, i try turning it on and of, but it doesnt work. And i need it on to upload photos on the computer.


Reset camera, take out battery, try manual repair ... Canon PowerShot A560 Digital Camera

Uploead Pictures I Upload Photos To My Computer From My Kodak Camera. When I Attach The UBS Cord Up To The Computer From My Camera, The Computer Notes That The Ubs Cord Is Not Recognized And That I Need To Reconnect It, But When I Do The Same Thing Happens. What Should I Do?


Try NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or c ... Kodak EasyShare Z710 Digital Camera

When I use the ArcSoft Photo Impression Program and attach the camera to the computer with the USB extension cable it shows no pictures available. When I turn on the camera the pictures are there. How do I get it to release the pictures to the computer. I tried My Computer as the instructions stated but I do not have a Removable Disc selection after that to select.


Get a card reader and use it to download to a folder you create on your desktop. ... Digital Cameras

I am logging into finepix and i want to transfer pics onto my computer and i plug in the usb and then the camera and then turn on and then it makes the noise that the computer registers the device but doesnt think or say anything and wont bring up the pics. do i need to update the system to access pics. even though the program is already on my computer and it has worked before?


... Fuji FinePix J12 Digital Camera

My camera was working fine and i turned it on it said low battery shut it self off no big deal then i put brand new batteries in it and the green light just blinks at me it won't turn on anymore i even tried hooking it up to my computer and it just won't turn on at all


Is this a new camera? Even though you have a new set of batteries, it will be viewed as low if the contacts are not really good.Try to clean the battery contacts with a qtip or cotton bud. Do not touch the battery ends as oily fingers might contamin ... Samsung S860 Digital Camera

My D80 is suddenly dead. I was uploading photos to my computer yesterday. After most of them were uploaded, an error message popped up saying an error kept it from uploading the next one. It kept popping up and none of the remaining photos were transferred. After that, the camera will no longer turn on at all. I made sure then lens was firmly attached, checked the SD card, and changed the batteries, but it will not turn on or respond in any way. No lights, no display readout, nothing. It is tot


This is why the pros always use a card reader instead of the camera. When you disconnected the camera, did you remember to use the "safely remove hardware" function? The computer was obviously still trying to write and communicate with the camera and ... Nikon D80 Digital Camera

I was Importing some pictures to my computer from my Canon sd 1300 is powershot digital camera , When the Battery died , I was not in the room at the time , So I came back in and attempted to turn the camera on and it said "Please change the battery pack" which means I need to charge the battery , and When the camera shut off , The lens did not close . SO I charged my battery , and the next day , I put the battery back in the camera like normal and I turned it on , and on the screen it said "Len


Since your camera is new the priviledge of your warranty claims must not be lost. So do not tamper to lose this benefit but call up the call centre of Canon for registeration/advice. What you can do is to remove the battery and keep if off . Since th ... Canon PowerShot SD1300 IS IXUS 105 Digital Camera

CABLE CONNECTION IN PREPARATION FOR DOWNLOADING PICS I ATTACH THE CABLE FROM CAMERA TO COMPUTER---TODAY THE COMPUTER DOESN'T RECOGNIZE IT! WOULD YOU SAY IT'S A CABLE PROBLEM AND IF SO CAN I USE AN O.E.M. CABLE OR DO I NEED SOMETHING SPECIAL?


Use a card reader instead of your camera. ... Canon PowerShot A620 Digital Camera

Cyperpix s-555v my mercury cyberpix S-555V camera worked well for a couple of weeks, but once when i tried to attached it to my computer it stopped working. ever since every time i try to turn it on, the red light turns on for a few seconds indicating busy, but then it goes off, and nothing happens. neither the lens opens nor does it repond to any kind of gentle pats. i've tried new batteries too, but all in vain.. what do i do?


Dear,If your camera is in warranty period then please visit the nearest service station.Regards,Rakesh KumarNetwork Support Engineer ... Mercury Electronics CyberPix S-550V Digital Camera

My kodak M1063 digital camera was working great with no problem, my husband started useing it but the batterie was low and needed charging he didnt want to wait so he took out the batterie and put a batterie from a used kodak that we nolonger had but kept the batterie. when he put it he turned it on took a couple of picture and the pluged the usb cord to the laptop to trasfer the pictures to the computer and then the camera completely shut off and nolonger turned on we tryed pluging in to charge


The old used battery was probably not used for a long time and in time, completely discharged and died. It can't be brought back. I don't know why your camera won't turn on with the original battery. ... Kodak EASYSHARE M1063 Digital Camera

Cyberpix s-555v my mercury cyberpix S-555V camera worked well for a couple of weeks, but once when i tried to attached it to my computer it stopped working. ever since every time i try to turn it on, the red light turns on for a few seconds indicating busy, but then it goes off, and nothing happens. neither the lens opens nor does it repond to any kind of gentle pats. i've tried new batteries too, but all in vain.. what do i do?


Sounds like a problem with the usb cord and you need to write the company and they are really good about sending out another one,same thing happened to me too. ... Mercury Electronics CyberPix S-550V Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4125 seconds