Having problems with your HP Photosmart R707 Digital Camera ?

No Flash The flash will not fire although the camera self diagnostic does not detect a fault.

Answers :

Probably you need to change strobe.
Repair Help & Product Troubleshooting for HP Photosmart R707 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

No Flash The flash will not fire although the camera self diagnostic does not detect a fault.

Probably you need to change strobe. ... HP Photosmart R707 Digital Camera

Hi, My D80 has suddenly developed a fault, where it registers the flash as open and in use even when its shut. This has the effect of syncing the shutter speed and limiting it to 1 200th in all modes. In addition, whilst the flash button will still change the flash mode using the command dials, it won't open the flash- almost like the camera thinks the flash is already open. I have tried prising open the flash, and it still doesn't fire even when open. There was no indication of a problem previ

Hi dave_lankest. My suggestion is to do a factory reset on the camera. This is found on page 129 of the manual. Open the rubber flap on the left side of the camera then you will see below the USB port a small button, that is the reset switch. If that ... Nikon D80 Digital Camera with 18-135mm Lens

My Minolta x31 camera has a fault. Cannot record a photo (black screen) can playback photos stored on SD card. Flash & monitor work as per normal.When in photo mode monitor is nearly black all over.Flash fires & appears to record photo. Nothing recorded.Please help

Sounds like the image sensor may be gone. You should check with Minolta for service or the vendor where purchased. ... Digital Cameras

I was taking test photos around the house with my new camera and the flash won't fire properly (the flash pops up out of the camera but it makes little sparking sounds and flickering on and off). I've tried various modes including auto night etc but it won't stop flickering (just sparking sounds and a flickering flash like a light bulbs does just before it blows).also I have tried taking images using the basic auto mode in a low lit area and the flash pops up but does not fire.

I think top cover is faulty it s giveing error 05. if poop up and giving err99\015\012then flash pcb faulty other wise need to replace top cover. ... Canon EOS Rebel XSi Digital Camera

White Screen Upon startup lens emerges but when screen appears it is white whereas it normally displays whatever the lens sees. When the shutter button is pressed the camera will focus and take a white picture which can be deleted. The camera does not flash although flash is set to automatic and photo taken in a dark room. Camera flashes (weakly) with flash set to manual on. Lens is unobstructed and appears to be perfectly normal. Camera was not dropped. Batteries have been changed.

\015\012Upon startup lens emerges but when screen appears it is white whereas it normally displays whatever the lens sees. When the shutter button is pressed the camera will focus and take a white pictur ... Pentax Optio E10 Digital Camera

I have a Nikon D90 with 18-105 mm lens. Lately, the onboard flash has not been firing even when I try to enforce it by having the flash popped up. It will only fire if I do one of the following: 1) unmount the lens from the camera body and then re-mount it back on, which the flash will fire maybe once or twice and that's it!, or 2) switch on a different lens which definitely works with the flash firing every single time. What needs to be done? I purchased this lens last December (2009). Is

Sounds like a dodgy electrical contact, possibly between the lens mount and the camera body. The lens ought to still be in warranty, but that would depend on what warranty the manufacturer or seller offer in your part of the world (in the UK, the sel ... Nikon D90 Digital Camera with 18-105mm lens

Hi there, I have a nikon D50 camera and the inbuilt flash unit does not work any more.... it pops up in dark conditions bu tthen fails to fire. The camera will adjust the shutter speed as if the flash was turned off, and the flash doesn't work in any flash mode or any function mode. Could it be the bulb perhaps? I have reset the camera as well to no avail. please help! thanks :)

Hello, and welcome to Fixya.. This is a very common and known issue with the D50 camera by Nikon. Some buyers flash only works once and then quits. Its due to the speed of which the flash pops up, it literally breaks ... Digital Cameras

My nikon d40 built in flash is not working suddenly. the camera didn't fall. my son took some pictures with it then suddenly the flash stopped firing. everything is ok except the built in flash.the flash lever keeps on clicking everytime i make a shot but the flash is not firing.

... Nikon D40x Digital Camera

Dropped camera on floor and now the flash symbol constantly flashes up on screen but the flash does not work. The camera appears to be working ok apart from this annoying fault.

The fall could have damaged the pcb or lines to the circuit. This is triggering the display to show the indiction. I would suggest that you ignore this as the camerra is working in good condition. If you would like to probe and think you can confiden ... Sony Cyber-shot DSC-W30 Digital Camera

Sony DSC-WX100 I have a flash error E:91:01 on my WX100. I have tried to initilize the camera but the fault remains. I have found a replacement flash board from a working camera but the service manual says I should clear the flash error before installing the new board?

... Digital Cameras

Camera does not fire external flash

Also be certain that the flash is screwed onto the shoe as tightly as possible. ... Canon Rebel XT / EOS 350D Digital Camera

My EOS 400D flash sometimes pops up in bright daylight in full auto mode. I sent it back to Cannon who returned it saying no fault found. I then began to think that the problem was the way I held the camera and that I may be obscuring the (light?) sensor near the grip with my hand. After not using the camera for a while I am now taking shots again and the flash pop up problem has re-appeared. I am now sure I am not blocking the sensor. Any ideas?

In full auto mode, the camera tries to use fill flash, when it detects a backlit scene (e.g. a person in front of a window). So this is not a bug, it's a feature!If you don't want the flash to fire, you can push it down and still take the shot. ... Canon EOS 400D / Rebel XTi Digital Camera with 18-55mm Lens

Nikon D40 pictures taken but too dark even in AUTO mode with flash on a bright day. also, some days ago I had the Shutter release error message while taking some photos. After that, the camera is acting weird, pictures sometimes are taken but the picture is always dark, although flash is used and AUTO mode selected. I do not see the error message anymore, but the camera simply do not take pictures properly. I tried formatting, etc with no result.

Make sure flash is on your flash on cam is sticking. ... Nikon D40 Digital Camera with G-II 18-55mm Lens

No Flash Hi The flash has stopped working on my pentax optio w10 camera. Is this a known fault, is it repairable or do I need a new camera, thanks G

Hello. \015\012\015\012that is repairable, however only the expert on pentax camera can do the task. You can contact your vendor maybe they can cater the issue about the camera. best regards, melnavz ... Digital Cameras

Intermittent problem The camera works fine for awhile then the 4-way selector suddenly will not change the menu. Or it gets stuck on full flash or no flash. The selections may get mixed up. The review won't activate except for the last shot sometimes. Then if you leave the camera for a couple of days it seems to fix itself. Everything is fine then suddenly all the troubles come back. Although it gets messed up like this you can still take photos with it and you can use the other modes usually to

Sometimes, by changing the swithces of the control panel solves the problem ... Sony Cyber-Shot DSC-S85 Digital Camera

Hello! When I attach the flash on my Nikon D200, it fires even while I'm focusing or just when I touch the trigger button. Any ideas? The flash is not firing like that while not on the camera.

The flash on the camera is being used to throw light for the lens to focus, unless the flash has a setting / the camera has a setting to fix this.... I would assume this as a normal behaviour.\015\012\015\012Just to be sure that i'm think ... Nikon D200 Body Only Digital Camera

Hi, I've just recieved my nikon d90 back from a repair and service, and although everything appears to be working fine, whenever I want to change shooting modes,( auto, P, M, flash off etc), they only work once I have selected them, and then turned the camera off and back on. In other words I cannot be shooting in the Auto mode and then switch to "flash off auto"....all that happens is that the auto focus works but the shutter will not operate. If I switch the camera off and on however, I can t

I'm going to assume at this point that the camera has been serviced correctly. What I'd suggest is that you look in your manual and find where you can reset your camera back to the factory default settings. Okay here are a few thoughts that might be ... Nikon D90 Digital Camera with 18-105mm lens

Warning massage I am getting a warning message in the screen a soon as I turn on the camera E91-01. Also the flash will not operate. My Cyber-shot display screen suddenly started flashing E61:00.  I know this is the self-diagnosis display, but can't find any explanations for this code.  Also, today my computer doesn't recognize my camera when I try to import new pics.

I am having the same problem as well. The error message E:91:01 comes up and the flash will not operate. ... Sony Cyber-shot DSC-W90 Digital Camera

Flash How can I force the Canon S3IS built in flash to fire every time I take a photo? When I have backlight it will not fire in the auto mode. My old Kodak digital had an easily set option but I can't work out how to do it this camera. Thanks

Thanks, I reckon I'll just have to change from auto exposure to one of the preset ones. ... Canon PowerShot S3 IS Digital Camera

Canon 300d flash won't fire. Pops up ok but display just reads "busy" and camera locks up. Must turn on/off to get camera working. External flash works ok.

This may sound obvious, but have you tried to make surer the battery is fully charged and then see'ing if it still does this? The reason I suggest this is that I had a similar problem and when I fully charged the battery this problem went away. I te ... Canon Digital Rebel / EOS-300D Digital Camera with EF-S 18-55mm Lens

When I plug in the usp port cord to my computer and turn on the camera the camera will first flash on then try to connect to the computer, then flash on again and disconnect from the computer before any pictures can be detected.

Try NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the c ... Nikon COOLPIX S630 Digital Camera

I have a SX20IS. Purchased a Speedlite 430EX. It fires manually, but I cannot get it to flash with any camera setting. Manual says slave and master must be on the same channel. I see how to do this, but what channel do I set it to and is camera the master and the flash attachment the slave?

... Digital Cameras

My G7 PC1210(#4231208129)first declared a memory card fault. The card was unreadable with any means available to me. With a another card the camera was OK but now after a few days the auto flash is non functional. Setting the camera to no flash is still fine. What do you think?

I think that you can easily upgrade the firmware available from the Canon website.Reference the Memory google for the Memory recovery format tool by Panasonic and you can reformat any memory card.Regards Paolo ... Canon PowerShot G7 Digital Camera

I have a Minolta Maxxum 7000i with a 3200i flash unit. The flash is not working. The batteries are fresh and inserted properly. The control lights on the flash unit light up when I am ready to shoot but the flash does not fire. I have the camera in "P" mode and the flash is turned on. Can you help?

Can you fire the flash manually? there might be a red button on the flash for you to do this. If you can operate the flash manually, then take an eraser and clean the contacts on both the camera, and flash, then take a Q tip, and a little rubbing ... Digital Cameras

My Samsung S630 Digital Camera doesn't flash after a series of picture taking. Now it fails to flash although I set in Manual mode and selected Flash manuall, but still t doesn't flash. What should I do? Thank you.

Hi there remove the memory card and reset the camera. Now turn on the camera with out the memory card and make the camera flash light ON mode and take a snap. If the flash not working after this setting, then you need to replace the flash tube. The f ... Samsung Digimax S630 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5260 seconds