Having problems with your HP Photosmart R727 Digital Camera ?

Camera will not say on and the power will only come on when the power cord is connected.


Answers :

Your camera's battery is dead and is not charging. Please purchase a new battery and replace the old one. It is a standard Lithium cell that you can order from HP(recommended).
You can order it online from
http://h10025.www1.hp.com/ewfrf/wc/siteHome?lc=en&dlc=en&cc=us

Repair Help & Product Troubleshooting for HP Photosmart R727 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Power problem I was charging camera using 4.5 DC volt socket on Camera, next I switch on camera so Lens head came out, accidentally power pin came off from camera and lens will not go back. Now nothing happening to camera when power cord connected or with battery, camera will not switch on at all including power lite does not come on with power cord connected. Look like it may have blown fuse in camera or something else serious. Any solution which I can try? I'm a very handy man with good too


I sounds like coincidently something in the camera failed. I doubt very much that simply pulling the power from the camera would cause damage. \015\012\015\012In anycase, if you were to open the camera, you would see that all the circuit ... Olympus FE-220 Digital Camera

Uploading pics my camera won't upload pics to my computer...the screen says that it's not plugged in and to check power and connections but i have? Same problem. Camera is about 9 months old and hardly used. Computer doesn't detect camera when it is plugged in. Set USB to : Mass Storage (USB Direct Print) as stated in instructions but green light doesn't come on when camera is turned back on as directed to do in instructions. Cord looks like new but I guess I can try and find another one if nob


When you plug in your camera go to my computers and under documents and stuff you will find your camera is recognized ... Casio Exilim EX-Z750 Digital Camera

Camera will not say on and the power will only come on when the power cord is connected.


Your camera's battery is dead and is not charging. Please purchase a new battery and replace the old one. It is a standard Lithium cell that you can order from HP(recommended). You can order it online from ... HP Photosmart R727 Digital Camera

Samsung S73 Hi I connected the usb cord to my computer and then to the camera to download my pictures. Now the light on the camera will come on, but the screen is black and my zoom will not come out and lens will not open. I am also having a problem powering it off. The only way I can power it off is by taking out the batteries. Can you please help?


If you don’t find a solution you may want to try [email protected] He was able to give me some great advice and he has used parts in good co ... Samsung Digimax S730 Digital Camera

Camera works fine with power supply cord connected. It will also charge the battery if connected to camera and power supply connected to ac outlet. Checked battery and it has 8.32 Volts stored in it after charge, however the camera will not power on with fully charged battery. Checked DC connection plug where power supply connects to camera and battery voltage present at connecting port with charged battery connected. Checked 3 Spring pins where battery connects on camera and voltage present whe


Your charger is probibly the problem i had a friend of mine that had the same problem but different camera i told him to get a new charger he did and it worked so yoyu do the same goodluck:) please rate this solution... ... Digital Cameras

Transferring pictures I am having an issue with transferring pictures from the camera. An error message has come up at the end of the transfer. It says:An error occured while saving images. Check your image capture device connection and try again.By that, it means the USB cord connection. So I have checked that. Then, I tried uninstalling the program and reinstalling. That didn't work either. I don't know what to do.Please help.Thank you.


Hi,A couple of things you can try:1. Insert the Camera's USB cord to another USB port of your PC;2. While disconnected from the PC, verify that the pictures are still inside the camera's memory;3. Reset the camera (power ... Digital Cameras

When I connect the USB cord from my Kodak camera to the pc and i press the power button on the camera a window pops up that says "Microsoft Document Scanning does not support this type of device" There is nothing else it lets me do and i woul really like to upload pics and videos. Please sugest what i need to do.


Consider NOT using the USB connection.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or ... Kodak EasyShare One Digital Camera

Downloading Photos Im having problems downloading photos from my camera to my laptop. i have used the usb cord between laptop and camera and it seems to connect ok. I cant open Olympus media at all so i have tried opening by using explorer. It seems to pick up my first 20 or so photos but will not show the other 200 of them. I havent been able to transfer them accross at all i have even tried copy and paste but an error message keeps coming up saying that its the worng file name. The only thing


Remove the Olympus software.Let Windows find them with the Camera/Scanner Wizard.It is likely the laptop has not the memory resources to receive all the photos in one hit so try in batches of 10 or s ... Olympus Stylus 770 SW Digital Camera

My panasonic lumix dmc-fs3 will not connect to my pc so I can upload pictures. It is not my usb port because I can plug other things into it and works fine. This happens with any usb cord I try to use. Also when I try to connect it I get a message that says picture is displayed for 4:3 tv for a 16:9 setup and even though i've reset all the settings on my camera it still comes up


Start using a card reader instead of your camera. ... Panasonic Lumix DMC-LZ2 Digital Camera

Uploading pictures whenever i go to hook up my camera to the computer it comes up saying connecting to pictbridge device then a minute later says enable printer to connect and underneath says switch on menu then i do that and all it does is come up with usb connect......do i need to change it from pictbridge to ptp or mass storage or what? i dont know what just happened..its worked fine for me every other time


Mass storage is easier, in my opinion. In that mode, when you hook the camera up to the computer, it will show up as a device in My Computer. Then you can just access your pictures there. ... Sony Cyber-Shot DSC-S500 Digital Camera

USB cord I recently got a kodak easyshare digital camera-c533,and im not sure if i received a USB cord to fit the camera so that i could upload pictures from my camera to the computer.Since I do not have a cord that fits the camera,I have tried to got to Walmart and buy one but they say they needed the cord size.I am looking for the cord size now online so that I can go to the store again and see if that works.Please help. we are missing the USB connection cord to our Panasonic Lumix DMC-FX8 d


Try out the normal usb exten cord which is used for I-Pods, this will work out ... Panasonic Lumix DMC-FX8 Digital Camera

I've just purchased this camera and plugged it into a usb port in my computer, as the instructions say to do, in order to set the camera up. My computer does not come up with anything that allows me to set it up. It comes up with a dialogue box on the computer that says 'camera connected - select the program to launch for this action' but there is nothing to select. I have Windows XP SP3 so I have the required system requirements.


As a work-around, you should try using Picasa to download the pictures off of your camera.\015\012\015\012\015\012Picasa is a free download from Google and has many cutting-edge features for picture management. I think that you'll like i ... Olympus SP600UZ Digital Camera

I cannot down load my photos from my digital camera on to the computer. I have connected the cord to the camera, switched it on, connected the cord to the computer USB outlet and no message comes up. I go into My Computer to click onto camera or similar icon, but there is nothing foreign registering. Where am I going wrong ?


I just experienced this problem and went round in circles for a few hours before stumbling on the solution. My camera, a Sony Cybershot, has 4 USB Connect modes in the Setup menu: PictBridge, PTP, Mass Storage, and Auto. The only mode that would work ... Digital Cameras

Can't connect to pc through the usb port. I used to be able to connect the camera to any pc by connecting with the cord to an usb port - all I did was connect and switch on the camera and it gave me the option of 'computer' and then it would give me the option to open the files and download onto the pc, but now when i plug it into the usb port and switch the power on the camera just switches on and does not show up in the computer at all so my photo's cannot be downloaded onto my pc


Hi, ... Casio Exilim Pro EX-F1 Digital Camera

Power surge Hi, Everytime I connect my camera to my computer, the computer gives an error message saying a power surge has occurred on the USB port and so it disconnects the USB port. I bought a new cable to connect the camera thinking that might be the problem but I still got the same error message. Hope you can help!


... Pentax Optio S40 Digital Camera

How do I establish a connection from my camera to my computer. When I use my USB cord I get no reaction from my computer, but my camera tries to connect and then says no devices are connected to the camera dock.


Do what the pros do...use a card reader. ... HP Photosmart M447 Digital Camera

Hi guys..... i was given this camera yesterday by my mom as a present, she has had it now for a while and it was working fine. i received the camera in working order....connected it to my pc and took all of her pics off the camera....thought i would charge up the battery so that i could start playing with the camera and trying out all the different settings....... Well i plugged the battery back into the camera and pushed the power button....the power luight comes on for a 10th of a second and g


Now you can try this:Try taking the battery out of the camera again, and carefully putting it in, again. Make sure the camera will turn on, to check that the battery is well seated.Then connect the proper charger. If there are ... Sony Cyber-shot DSC-W70 Digital Camera

I have just downloaded the camera on to iphoto and have cleared the camera memory . I clicked the eject icon on iphoto and once cleared unplugged the USB download cable . I have just pushed the power button to turn the camera on and firstly get the message on the camera screen "Access" then a message comes up saying "turn the power off then on again " When I do this the same process repeats itself . The lenses wont open and protrude out of the camera ready to take photos. The battery has ju


Sounds like you did two things wrong...you deleted/erased/or formatted the camera using the computer. You disconnected the camera without using the "safely remove hardware" function. ... Sony Cyber-shot DSC-W50 Digital Camera

Unable to download cards from camera. Consistently gives error message that is unable to connect to camera. USB tested successfully with another camera, card tested successfully with another camera. When camera powered up after connection goes to Busy mode and then blanks screen and utility comes up with only one option (Manage files) available.


Oh, reinstalling the software you got, or try another software like Windows Photo Gallery, or another video editing software and 'Import from Camera'.\015\012\015\012Or, you can buy a USB adapter and directly remove the memory stick and manuall ... Digital Cameras

When I connect the camera to the computer it says there's no camera detected. I try to turn the camera on and the welcome screen comes on and turns off immediately. Its completely charged... works fine when the camera isn't connected to the computer.


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Kodak EasyShare M530 Digital Camera

My laptop turns off after connecting camera, i have an asus laptop, and after connecting the cord from camera to laptop the laptop shuts down and i have to disconnect and then reconnect everything to revive computer. i have downloaded pictures off my camera before onto this computer so i don't understand what the problem is. I recharged the battery of the camera so was at full power also.


Your laptop has to work harder when when things are connected to it thus getting hotter. it's more than likely going into thermal shutdown because the fan is dirty and blocking the cooling exhaust hence no cold air circulation.have this cleaned ... Fuji Finepix Z20fd Digital Camera

I have a Canon E80 that I bought several years ago. I connect the power supply from the electrical outlet to the camera and the power light comes on but the camera does not work ( I can not charge the tape the video camera does not work). What I can do it?. The main purpose to run the camera is transfer the videotapes to dvd and I can not do it. I would appreciate your support to transfer the 8mm tapes to dvd.


... Digital Cameras

MY Sony CyberShot will not connect to the computer. I've connected it succesfully before and now, when I hooked the cord up and turn the camera on to upload, the camera says "USB Mode Connecting...Switch on to [MENU]" and I tried all three to enable it to connect and it won't.


Try NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or c ... Sony Cyber-shot DSC-W55 Digital Camera

Still nothin'! Thank you so much for trying to help me. I know you must be a littletired of me. I may just be a long lost cause. This is what is going on.I have downloaded the driver. The driver shows up on my desktop.The battery and memory card are in the camera. I turn the camera on andinsert the usb cord, nothing. The camera is set up exactly like how thebook says. The VistaQuest picture comes on and stays in and so does thegreenlight. Once this comes on the camera's screen, you can hit any b


Hey thereLet try this before you go to Rite Aidthis I took from the camera manual, so make sure you flow the stepsFor Windows 98/me customers:Please install camera drive before connecting.1. Turn the camera and computer ... VistaQuest VQ-5010 Digital Camera

Until recently my canon powershot SX10 IS connected just fine to my mac. Now when I connect it to turn it on the camera says connection error. I have tried two connection cords. Do I need to take my camera in for a repair?


Try using a card reader to download your pics to a folder you create on your desktop. ... Canon PowerShot SX10 IS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5704 seconds