Having problems with your iSonic Snapbox DC-520 Digital Camera ?

My flash won't turn on for my iSonic digital video camera. The instructions say to press the "up" arrow on the camera in the capture mode. I do this, I hear a beep, the tint of the screen changes, but it doesn't flash in any mode. I either see a "no flash" symbol, or nothing, and either way it still doesn't flash.


Answers :

Repair Help & Product Troubleshooting for iSonic Snapbox DC-520 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My flash won't turn on for my iSonic digital video camera. The instructions say to press the "up" arrow on the camera in the capture mode. I do this, I hear a beep, the tint of the screen changes, but it doesn't flash in any mode. I either see a "no flash" symbol, or nothing, and either way it still doesn't flash.


... iSonic Snapbox DC-520 Digital Camera

I have a sony cybershot DSC-W210 and just recently the flash wont work when its on any mode to take a picture it has the flash symbol on the screen flashing and the code E:91:01 underneath also flashing its takin pictures as normal just without the flash it wont let me change the settings of the flash at all. Apart from this the camera lens shutter seems to be sticking when i turn on the camera it doesnt always open i have tried cleaning the lens but it doesnt seem to make any difference!


I have a sony cybershot DSC-W210 and just recently the flash wont work when its on any mode to take a picture it has the flash symbol on the screen flashing and the code E:91:01 underneath also flashing its takin pictures as normal just without the f ... Sony Cyber-shot DSC-W70 Digital Camera

I have a Canon sd630.The camera works great except that it won't remember its settings. Upon turning on the camera,it would say it's in manual mode, but if I change it to automatic and then turn it off. It would be back in manual mode again. I have reset the camera and even taken apart to replaced the internal battery. Still no luck. Appreciate any help. f.y.i I have tried looking for a firmware update, but no luck either. I was wondering if I could flash my camera with the sd500 firmware? I ju


Try to follow the route up the circuit from the battery on the motherboard.\015\012maybe the battery is ok but the power not rich to the mother board or memory chip.\015\012take more attention on the connectors. ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

Intermittent problem The camera works fine for awhile then the 4-way selector suddenly will not change the menu. Or it gets stuck on full flash or no flash. The selections may get mixed up. The review won't activate except for the last shot sometimes. Then if you leave the camera for a couple of days it seems to fix itself. Everything is fine then suddenly all the troubles come back. Although it gets messed up like this you can still take photos with it and you can use the other modes usually to


Sometimes, by changing the swithces of the control panel solves the problem ... Sony Cyber-Shot DSC-S85 Digital Camera

I am having problems with the flash working on my camera. It does not seem to matter if it is in automatic or manual modes. When I take a picture in either mode, when a flash is needed, the flash icon just blinks on the display. The camera will not take any photo when this is happening. The only way I can get my camera to take a photo is manually set the flash to off. Why is this happening?


Please reset camera through Reset option in Menu. This will set camera on default settings and any glitch in settings will be removed.Thanks. ... Canon PowerShot SD870 IS Digital Camera

I changed the batteries in my Power Shot A720 IS recently when the low battery warning flashed, and had taken only two photos when the warning flashed again. I moved the mode switch to playback and the screen went dark "Change batteries now" appeared. I turned off the camera, set the mode switch to shooting, turned the camera back on and was able to take two more photos before the low battery warning returned and prevented any more picture taking. I purchased and installed new batteries and f


Hi, 1st you must use alkline bat or minimum 800 mhp bat....and if problem is not solved then cheak the bat cap and connection clean with aomthing,,,,If any thing else contact [email protected] ... Canon PowerShot A720 IS Digital Camera

Hi, My D80 has suddenly developed a fault, where it registers the flash as open and in use even when its shut. This has the effect of syncing the shutter speed and limiting it to 1 200th in all modes. In addition, whilst the flash button will still change the flash mode using the command dials, it won't open the flash- almost like the camera thinks the flash is already open. I have tried prising open the flash, and it still doesn't fire even when open. There was no indication of a problem previ


Hi dave_lankest. My suggestion is to do a factory reset on the camera. This is found on page 129 of the manual. Open the rubber flap on the left side of the camera then you will see below the USB port a small button, that is the reset switch. If that ... Nikon D80 Digital Camera with 18-135mm Lens

The flash on my Nikon D3000 won't pop up (regardless of the setting) and when I go into "Shoot" (from the guide menue) and then into "Easy Operation" the camera is set at No Flash but I'm not given the option to change the setting and says "The camera is now on "Auto No Flash Mode" but doesn't give me an option to change the setting there either. Can you help?


... Nikon D3000 Digital Camera

I can not get the auto flash to work The screen shows on the left: iso auto, a box, M1 on the right the flash symbol A, auto, steady hand symbol, 1375 I try to take a picture and the camera won't take unless I turn off the flash. I have tried to change many settings in the function area, but I can not figure out what I accidentally changed in the first place. please help me to get my camera to work in the auto mode again


I have this same exact problem. When you say "repair it," how? ... Canon PowerShot A720 IS Digital Camera

The flash no longer works. In "auto" and in either the "auto flash" mode or "forced flash" mode no flash occurs. It is not in "suppressed flash" in the "portrait" screen position mode. The batteries are good. The shutter button is pressed after the charging is completed. The camera is not in "continuous shooting."


Hi there, \012Well first of all try to reset your camera, remove the battery from your camera for 4 hours and then insert them again, it helps you to do a hard reset in your camera. if further you have the same problem then there mus ... Fuji FinePix 3800 Digital Camera

When I turn on my camera, all I see on my screen is a blank white screen with two large black blobs running from upper left to lower right. The same screen appears when I try to preview past shots. My menu won't work either. Any clues as to what's wrong? I carried my camera in my right back pocket before this happened and I may have sat on the screen without knowing it. Is there any way to find out if my camera is still workable? Thanks. Bob Jenks [email protected] 561.694.8326


Dear Bob\015\012\015\012From what your telling and how your explaining in detail here it looks like you need a new lcd display. These are not what we call cheap but it can be repaired at a camera shop, I have seen people repa ... Canon PowerShot SD750 / IXUS 75 Digital Camera

I receive the E:61:00 error on screen, and the screen will not focus. I shook the camera around (per forums) and the screen focused for a minute, but would not zoom in out out. When I tried to zoom either way it would make a whirling sound. I opened my camera to have a tiny little piece, with "C 805" inscribed on it, to fall out. I do not know where this belongs, and still can not get my camera to focus. Help!


Hi,The E:61:00 error code displayed on the Camera screen indicates that a Camera malfunction that you cannot reverse has occurred. This seems to be an internal malfunction of the Camera. You may try power resetting the ... Digital Cameras

Camera jam Ricoh Caplio R5 - tried to switch it on to take a picture, and lens came out part way but the camera then switched off. Flat battery perhaps, so charged battery overnight and tried again with similar results. Lens still part way out, maybe some whirring noises, screen flashes but then camera switches off. Any ideas? Dead battery / broken charger? - or problem with camera? And how to check (I only have the one battery)


All the R series Ricohs have a pretty complicated lens system employing 2 swing-out lenses which can get stuck pretty easily, or worse, broken. If you are very good at taking things to bits you might have a go at fixing it (I've done several that wer ... Ricoh Caplio R5 Digital Camera

I have a Canon Powershot S3 IS and I was looking at picture I had taken and the lens was retracted. I switched to the camera mode and the lens started to come out and hit my leg and stopped half way. The lens went dark. I turned it off to retract the lens and then turned it back on. The lens came all the way out but the screen is still black and I could feel the camera and just barely hear it making the noise it makes when the lens is coming out but it was already all the way out. I switche


Format ur memory card ....and replace the cells.....might work...contact the customer care for help ..they mightr be able to fix it ... ... Digital Cameras

Black screen when on camera or record mode, the screen is black. It'll take a picture and/or record but all in black. I thought the camera needed charging but that didn't change anything. I tried to view/change all the settings but still nothing. Any solution? Could it be defective? Please advise on how to fix or if it's even possible at this point. Thanks!


Hi,\015\012Your DSC-T1 has problem with CCD Imager and Sony will repair it free of cost. Please click ... Sony Cyber-Shot DSC-T1 Digital Camera

Hi, I have a Canon T2i Rebel. When i put the camera in "M" (totally manual), the image doesnt appear in the LCD screen. Everything else works fine in the monitor, but it is as if the lens where covered with the cap. But it´s not, and acutally all the other modes work fine. Only in the manual mode the image doesnt show, and the pictures also appear completely black. The menu shows sometimes something as if the exposure were less than -2, but even though i change the values for everything hig


That's great news, so let's write it up as a solution so that other people who search on here find the right information!So it appears that the Canon T2i when in manual mode (M) remembers whatever settings you play with, and that these se ... Canon EOS 550D Rebel T2i Digital Camera

When the Camera Is In Manual Mode, It will not Change Focus... I spin the wheel and nothing happens. Also i have just discovered in this mode, if i take a photo without the flash on, it will come out black, even with very good lighting, and when the flash is on, its still rather dark and its only the immediate area, (you can't see the background) What is going on???


I don't know about your camera, but when mine is in manual mode, it allows me to set the aperture and shutter speed but does not affect the autofocus. To make the focus manual, I have to move a switch next to the lens. When in manual mode, are you se ... Fuji FinePix S9500 Zoom Digital Camera

My Samsung s630 digital camera has a totally white screen when turned on. I changed batteries, repeatedly turned on and off, switched modes, but screen still only white. The camera is taking pictures OK, because I can access memory card using usb cable, and pictures are saved. Any help? Thanks.


Possible fault with the display unit. The display unit is not processing the video image and could be defective in this circuit.\012Since the camera is working fine I would advice that you use the camera fully than to open to tamper. But if you ... Samsung Digimax S630 Digital Camera

I cannot see anything when in camera, film, or view mode. When I snap a photo, it sounds like a picture was taken and the flash still goes off, but nothing is displayed on the screen. Only when I attempted to upload my photos onto my PC was I able to see that my camera was in fact still taking pictures!


Does it show pictures on the computer or is it black images, if they are black, your cameras lens cover could be stuck, it opens up when the lens is fully open, dirt-sand and dust or old grease causes the problem. otherwise your LCD on the camera cou ... Canon PowerShot SD600 Digital Camera

My Canon SI/IS Power Shot digital camera is not able to bring up image on normal operating picture modes. It does however still show stored pictures when I change back to images already stored in camera. In picture mode all I get is a dark screen and lines. What's up?


Definitely sounds like you have a bad CCD. The good news is, this camera is under recall for that exact issue. Canon will repair your camera OR possibly replace it with an S5IS even! Free of charge of course.From Canon website: " ... Digital Cameras

My camera will also show pics that I have already taken so I know the screen is still good but won't go into camera mode. I changed the batteries, even the card and still have the problem. I have been using fuji s5600 for three years now and it's the first time i encountered such problem


If it won't go into camera mode then maybe the micro switch underneath the swtich is damaged. It's on a small pcb with 2 micro switches for either of the 2 functions. play back and camera ... Fuji FinePix S5200 / S5600 Digital Camera

I've recently noticed a wide dark horizontal line approx 1/4 of the way down from the top of my screen display. The camera is kept in my home office, has not been dropped, gotten wet or exposed to extreme temps or humidity. The still photos come out fine but the videos I take have the line going through them. I played with it this evening and notice that the line moves down to about 1/4 of the way up from the bottom of the screen when I press the shutter in picture mode and stays there while


... Canon PowerShot A95 Digital Camera

HI! the flash of my canon sx130 stops working. I tried pressing the flash button but it would not change to the "flash on" mode, the icon always says that the flash is off. I tried different camera setting but still not working. Thanks!


... Canon PowerShot SX130 IS Digital Camera

I have a Panasonic DMC-LX2 digital camera, I'm based in the UK. Has worked fine for a couple of years, but 2 weeks ago, when powered up, none of the buttons work. Screen is illuminated, lens emerges OK, mode-select dial still rotates and switches between modes, on/off switch and aspect switches OK, but shoot button, all 5 'menu group buttons, anti-shake button, display/LCD mode button, waste basket buttons', zoom in/out control and 4-way direction button all 100% non-functional. Card is being ac


I just got identical situation today, and I have no clue at all. However, I figure that the camera is actually working busy like someone is holding the "UP" button continuously. To see this, power on your camera at any mode except the "Scene mode". A ... Digital Cameras

Fuzzy pictures My camera does not take clear pictures, no matter what I do. All the pictures are fuzzy and not sharp. Is there a tip you can recommend or a way I can reset the camera to original settings. Even if the camera is on auto focus, auto flash, and normal mode...they are still fuzzy. help!!! Amanda


Go back to film. Digital SUCKS. ... Casio Exilim EX-Z50 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6003 seconds