Having problems with your Jazz JDC64 Digital Camera ?

My jazz Jdc64 keeps saying I need a formated card for camera to function , I installed a SD 2gb sd card and it does not seem to reconigze it


Answers :

You need to format the card in the camera.
Repair Help & Product Troubleshooting for Jazz JDC64 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My jazz Jdc64 keeps saying I need a formated card for camera to function , I installed a SD 2gb sd card and it does not seem to reconigze it


You need to format the card in the camera. ... Jazz JDC64 Digital Camera

256mb Card I have a Camedia Digital Camera C-5050 ZOOM. I have 3 xD cards for it, a 32mb, a 256mb and a 2gb card. The first two work with out any problems, but when i use the 2gb and it asks me to format it I keep getting a message that says there is a card error. This seems to happen with any card size higher than 256mb. Is there anything I can do to fix this?


Maximum card size supported for C5050 is 2GB (CF/Microdrive slot) and 512mb (XD card slot) ... Olympus Camedia C-5050 Zoom Digital Camera

Firmware install on Pentax ist DS. Had Ver2.0 & everything worked fine. Simply wanted to upgrade to V2.02 to used SDHC cards. User Power AC and install ran approx 90 secs and displayed showed half way thru Phase 2/2 and then LCD went blank. No 'Complete' displayed. Now camera operates but no back LCD monitor display (top small LCD seems to work) and card seems not to read or write. Camera does release shutter but otherwise camera is not useable, Help!


You need to go to the support section of the Pentax website and engage in a live chat with a service tech using your computer or even a phone conversation to resolve your problem. ... Pentax *ist DS Digital Camera

Nikon D300 constant flashing of CF lamp My D300 CF lamphas recently started flashing continiously when the camera is switched on or off. The battery power is completely drained within 12hours, despite having switched the camera off. I have three Compact flash cards that seemed to be working ok without a glitch. I have tried reformatting the cards in the camera but no luck. I hvae the following cards. (SanDisk extreme III 2GB, Lexar Professiional UDMA 300x speed 4GB& 2GB). The camera is


Did u do a hard reset? ... Nikon Digital Cameras

Do I use the orange or the black adapter card to insert a memory card into my olympus stylus 840 camera? I bought the camera last night. The lady also said I'd need a PNY 2GB microsd memory card. Well I've tried inserting the tiny black card into the larger black card AND the orange card and neither one seem to fit in the camera. Am I inserting wrong or is it just not compatible??


Try inserting it without either adapter card. ... Olympus Stylus 840 Digital Camera

New sd card will not allow me to select format. Wanting to install new SD card. Removed current 1GB card and installed new 4GB. Then went to format and it doesn't seem to reconize the new card. It states "Memoray card error" but I tried two new cards with same result. It sees the old card just fine. suggestions on how to format the new card or is it the camera.


This camera was manufactured before the SDHC protocol was developed for SD cards. A 'standard' SD card protocol is 2GB maximum, and that is what the camera is compatible with. I'm pretty sure the cards you are trying to use say SDHC on them, right? ... Canon PowerShot A520 Digital Camera

Hi, my name is Mathew I have a sony cybershot digital camera, when i switch on the camera, it shows as format error and a memory card like picture keeps blinking on the top right side of the screen, but when the memory card is taken out, the camera seems to be working fine. Can u please tell me if the memory card is corrupted, if so is there any possible way to rectify it and collect the data from it? Thanks.


You need to format the card in the camera. This will erase it so download any pictures first using a card reader if necessary. ... Sony Cyber-shot DSC-W100 Digital Camera

Panasonic DMC - F3. Attempting to load photos from camera to PC. Software provided has been installed. Camera has been connected to the PC via provided USB cable. PC does not seem to recognise camera. Camera is saying " connecting to PC " NO copy to PC screen appears. Copy to PC function within PhotoFunStudio5.0 does not work.No source drive can be selected. Next button is greyed out and selection box is empty. PC seems to not recognise camera


Consider NOT connecting the camera to the computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to th ... Panasonic Lumix DMC F3 Digital Camera

MEMORY CARD ERROR PLEASE CHECK THE CARD A complete picture taking lockout save for internal memory which functions just fine. There is the same problem on 3 existing and two new 2Gb SD cards from SanDisk. The internal connectors in the card slot are all in position. We have cleaned the card connectors and tried two different and fully charged batteries We do not have access to an AC adapter. We have had the camera for 'years' and this is the first problem - is the camera 'totalled'. Time for a


HelloI am glad to hear that we could be of help. Thanks for using Fixya, and be sure to come back again.Kind regardsLock123 ... Panasonic Lumix DMC-TZ3 Digital Camera

We just received our brand new canon t3i in the mail. We formatted the card (a 2GB 700X Professional High Speed Error Free (SD) Memory Card Class 10) and immediately started shooting to test out the camera. Everything seemed to work fine until we tried to apply a filter to one of the photos. The entire camera froze. We even tried turning the camera off and it would not shut off. We ended up having to take the battery out and put it back in. When we did and turned the camera back on we received a


Sounds like there was an error while the camera was writing information to the card. You can try reformatting the card using a computer and a card reader, then replace it in the camera and format it from the menu. If that doesn't work and the camera ... Canon EOS 600D Rebel T3i Digital Camera

I have instersted a memory card for my kodak c160 digital camera but the camera tells me I have to format it. I go through the steps but keeps taking me back to the original screen where it asks me to format the card. The card is and SD 2gb card.


Hi#1 Insert your memory card into your computer's reader if you have one. If not, you can purchase a multi-format USB Memory Card reader from Amazon.com or Buy.com# 2 Open up 'My Computer'. You should see it under the list of available dr ... Kodak EasyShare C160 Digital Camera

Have a new Canon Camera with 2gb SD card. Card was OK at first but now comes up as card locked. Installed in a different camera with same results. Lock switch on card is in unlock pos.


Hello. your SD card has a tiny switch on the card itself which locks the card in one position and unlocks it in the other. The purpose of the lock is to prevent anyone from formating it and losing it's contents. Check your card and I believe you w ... Canon Rebel XT / EOS 350D Digital Camera

My Kodak C190 will not read the card. I cannot format it in the camera because IT WON'T READ IT IN THE CAMERA. I keep seeing the same answer - "format in the camera" - but it can't read it. Now what ? I have I tried three other cards of varying sizes - 2gb, 4gb, 8gb, and 16gb - none were able to be read. The camera works fine with its internal memory, but that doesn't hold much at all. Any help would be great - Thanks


Can`t you format it on your PC ... Kodak Easyshare C190 12MP Digital Camera with 5x Optical Zoom and 2.7-inch LCD

I have Bonica 5.0 Mega Pixel Digital Camera (the one that has the waterproof glove, and fits inside the Snapper XP underwater case). Problem: I have been unable to find any SD memory card compatible with this camera. Have tried PNY 4 GB--no good. Tried PNY 2GB--no good. Trying PNY 1 GB.. and it just keeps "formating". While on vacation last fall, a friend let me try some other brand of SD card, 1GB..no good. I am very disappointed and need to know how to get a memory card to work wit


Try formatting the card inside the camera, that should work.If\015\012after formatting from camera menu the camera still does not read the\015\012card, then test the camera with a different SD card, a defective card\015\012can still be re ... Digital Cameras

Camera will power on lens works but the screen won't show any image but still shows menu options etc. but no pictures. I got an E18 once but the lens seems normal. The camera seems to function normally but won't record pictures.The cf card is in normally also.


Test ... Canon PowerShot A75 Digital Camera

KBuonamici: I got a Jazz digital camera for christmas. Lost my instructions, put new SD Card in it but it will not let me take pictures. Keeps saying camera needs a formatted card to function.


Look through the menu on your camera and there should be an option for formatting the card to be used on your camera ... Digital Cameras

Vivitar New vivitar 3720 camera for my child, can not get 2gb SD card to function with camera. How do we correct this problem ? Or is the card the problem ?


I have done exactly the same as you mate, 2gb SD maxell card, dosent function, however when we where at a family get togther i swaped cards with a mate, so i gave him my 2gb card to put into his camera which wan not a vivitar and gave me his 64mb sd ... Vivitar ViviCam 3720 Digital Camera

How do I add pictures onto my computer with the Olympus u tough 3005? I have tried taking the memory card and putting it into this little slot in my printer for digital camera memory cards, and usually that works to upload pictured, but with this one the camera symbol keeps blinking red meaning there's a problem, and the manual doesn't seem to explain how you do it... please help!


The cause of this is probably an incompatibility between your memory card and the card reader in your printer. Your camera is fairly new, and you probably have a memory card of 4Gb or more, which is going to be SDHC. Your printer is probably older, a ... Olympus TOUGH3000 Digital Camera

After Installing new camera card XD 2GB type M+ the Olympus Camera model D-395 only says card error and I would like to know what the problem is


Hi, There could be several reasons for this. Though I am quite confident it is because the camera can only handle a 16mb-512mb card as recommended in the manual. ... Digital Cameras

Dsc w50 sony keeps coming up on screen re-install memory card even with card in camera therfore cannot use camera, what could the problem be.


Could be a bad memory card or the card connector board. I hope this helps ... Sony Cyber-shot DSC-W50 Digital Camera

I have an older Vivitar Camera Model ViviCam 6385U. I tried two different memory cards and neither one seems to work. The first Memory Card I purchased was a newer HD card which I realized was the problem. I then went and purchased an older 2GB SD made by PNY. This card goes through the initialization process but no pictures are written to the card.


... Vivitar ViviCam 3746 Digital Camera

My camera won't accept new 2GB SD card. Keep


Do you have pics on the internal memory? You must format the internal memory with no card in the camera. Then, format the card. ... Kodak EasyShare C310 Digital Camera

I have a Casio EZ-Z1050 10.1 megapixel digital camera and am very pleased with it. I use a 2Gb memory chip with it, however, some snaps have gotten into the cameras on board memory and I cannot seem to delete them. If I look via the camera it displays a No files message but if I download via USB all the pictures I don't want keep re-appearing. Advice as to how to delete from on the camera's on board memory would be very gratefully received. Thank you. Ron Bernstein.


... Digital Cameras

I can't transfer pictures i have taken on my camera to my laptop, i've installed what seems to be the correct disc and have clicked "camera and memory card" then "browse and download images" yet every time i do so a box pops up saying "no camera found" what am i doing wrong? obviously i have the camera plugged in via usb cable and then switched on so i really have no idea what the problem is. assistance would be nice. thanks, amy.


You could try a different USB port if you have one available but the real solution to your problem is to use a card reader instead of the camera. ... Canon PowerShot A85 Digital Camera

I keep getting the error card not recognized when trying to use an Olympus M+ xd 2gb memory card. How large of a memory card will this camera support?


From what i know and i own a Fuji FinePixA360.According to the Manual 1gb is the highest amount of memory listed.Also you can not put a M+ (high speed) card in the camera will read error.Bascially the Fuji is an older camera and was designed for 1gb ... Fuji FinePix A360 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5608 seconds