Having problems with your JVC Digital Cameras ?

I have a JVC GR-DVL 160 Digital Video Camera My Battery & Mains Lead are working ok but the Camcorder is not receiving power from Battery or mains, so it will not switch on at all.



Answers :

Repair Help & Product Troubleshooting for JVC Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a JVC GR-DVL 160 Digital Video Camera My Battery & Mains Lead are working ok but the Camcorder is not receiving power from Battery or mains, so it will not switch on at all.


... JVC Digital Cameras

I have a JVC Everio HDD camcorder, model number gz-mg330rex which is approx 2 years old. The camera has had little use, been well looked after and carefully stored. Recently I went to use the camera using battery power and the camera would not switch on, so I tried the camera with the mains lead and it worked fine. I assumed there was a problem with the battery , so I bought a new battery from JVC. When I tried the new battery the camera would still not turn on. Do you have any ideas what could


Please check battery connector terminals in camcorder that might be clogged or corrosion on it. Clean it and try.If problem still remain, most probably internal fuse is blew off on main board of camcorder. Qualified camera tech is required to r ... JVC Digital Cameras

JVC Everio GZ-MC500 Camcorder. Video camera was left on unintentionally in the bag, and recorded around 1.3 GB of video. When this was discovered, the machine was switched off, and then back on again to capture video, at this point, the camera switched itself off. I thought it had just run out of battery power, but later found out that it would not switch on with a new battery, or with the mains adapter. Can you give me any advice on what may have happened, and whether it may be easily fix


... Digital Cameras

My S9600 was left unused [batteries left in camera] for several months. Now it will work fine with the mains adaptor, but is completely dead when on battery power. Have tried new batteries [rechargeable and 'ordinary'] - camera dead; have left on mains power for a few minutes, then switched to batteries, same result. Grateful for any suggestions...


Sounds like corrosion on the battery contacts. I have seen battery contacts with a thin, transparent coating that came from leaking rechargeable batteries- doesn't look like the usual green crud, but it stops electricity from getting through. Try giv ... Fuji Finepix S9600 Digital Camera

I have a SVP T-100 camcorder which all of a sudden stopped working. What is happening is it keeps showing a red light indicating there is no power in the battery and when you connect to the mains it turns green but when you try switching on it goes red again and stays this way!! I have tried a new battery in it and the same thing...the fact that it wont even work from the mains indicates something wrong with the powering getting to the battery or camcorder... Please help. Thanks Maxine xx


... Digital Cameras

Olympus e10 problem. Even with new batteries, could only take a couple of shots before the low battery icon came up & camera shut down. Would work fine using mains supply. Fixed by buying new battery holder. Now 3 weeks later doesn't work again - low battery then switch off both using batteries or mains power supply. Any ideas appreciated as it's a great camera when working. Thanks


You didn't say what type of batteries you are using. Best are CR-V3 lithium which should give 500 shots. 2300 mAh Ni-MH rechargeable batteries should give 200 shots. Worst are alkalines which Olympus do not recommend. Have you checked the co ... Olympus Digital Cameras

A Canon A570IS will power on and and everything works with external power (3.5-3.7V, 2A. 3rd party) but is dead with batteries (two fresh alkaline or NIMH AAs). I have used parts (from junk 570s) and have replaced the main board, button board, flexicable that includes on/off switch & shutter, leds, etc.. Again, lens, flash, storage, LCD, etc. work with external power, but not with batteries. I am at a loss. Any suggestions?


Since the external power works, we need to know, first off, if the battery terminals have continuity with the external power supply contacts. That will tell us an important part of this puzzle. The one hard thing about this problem, is that what ... Canon PowerShot A570 IS Digital Camera

No power my powershot a70 was working great for 3yrs, then all of a sudden it would not switch on, neither with fully charged batteries or mains power, it has never been abused or dropped, it just will not switch on at all completely dead.


Here are some simple things to try first for a camera that won't power on:\015\012http://camerarepair.blogspot.com/200 ... Canon PowerShot A70 Digital Camera

I have a sony HDR-HC1e camcorder. It works perfectly until I change the battery or switch between mains and battery, it then refuses to start. Not even a hard reset will start it. Leaving it with no power for a hour results in it restarting correctly when battery reinserted although sometimes loses clock setting. I've checked the internal cell and it reads about 3V.


Hi,\015\012\015\012First try with new batteries as power received will be less as the batteries gets older and so camcorder might not be working well. Clean the metal contacts of the battery holder properly with dry cloth and then insert ... Digital Cameras

JVC GZ-MG330HEK When connecting a data battery and switching on, camera powers up but then displays 'Communicating Error' with graphics indicating that it's a communicating error with the battery that's the problem. Have tried other batteries, all with same result, presumably meaning that the problem is in the camera. Any ideas?


Hi,Just found a workaround for the "cheap battery" problem. The problem is\015\012that there is some circuitry in the more expensive JVC batteries that\015\012the generics don't have. When this isn't detected by the camcorder, it\015\012w ... JVC Digital Cameras

When reconnecting my Sony ccd-f375e camcorder using the mains adaptor it initially worked. However when I switched of and on again it has failed to work. The light on the mains adaptor is on which suggests that power is going thru. I have tried to cleaning the terminals on the adaptors connectors to the camera but this also failed. Any thoughts? I have ordered a new battery just in case it is the mains adaptor.


Hi,Sony CCD-F375E is pretty old model camcorder that was launched in July 1991 This type of camcorders got known problem of leaky surface mount capacitors and solution was to replace these leaky capacitors carefully with proper soldering ... Digital Cameras

Canon SD1100 digital camera is completely dead. Nothing happens when I press the power button. Battery is good. Battery door switch is in good working order. I need to check for bad (blown) fuses on main board but where ? If you are not familiar with this camera and know how to fix it, please don't respond.


... Canon PowerShot SD1100 IS Digital Camera

Camera will not switch on, when put in cradle to charge the red light flashs continiously i've taken the battery out and replaced it as it says in the manual but no joy. the camera functions perfect when sat in cradle and is powered off the mains. thanks for any help you can give


HelloThank you for using FixYa for your problemAlways check the batteries first (check that the voltage is correct with a volt meter) but if is it still giving the same fault, your camera is faulty. It shoul ... Casio Exilim EX-S600 Digital Camera

Received a new SD990 IS today. Charged battery, inserted and switched on. Blue Canon screen appears but no request to set date and time, and none of the buttons have any effect. After about 30 seconds it powers down again. Seems to me it must have been damaged in transit. Any advice about things to try would be welcome, but I guess I may just have to send it back. Alistair. (Edinburgh) [email protected]


Best bet is to send it back for a new one. ... Canon PowerShot SD990 IS / Digital IXUS 980 IS Digital Camera

I have purchased a jvc camcorder in grand canaria,spain.It is jvc gz-mg330AE.i am led to believe by the sales person that it is a new recent model on the range.Is this so?.Also a more powerful battery pack-for BN-VF808U,7.2V 12800mAh.The standered battery on this cam which came with it is BN-VF808U,DC7.2-730mAH.Is the former battery pack(VF808U)a more powerful battery although it bears the same model as the standard pack stronger? -


Hi,GZ-MG330 is new series of camcorder with 30GB HDDRegarding battery, BN-VF808U, if its slim and supplied with camcorder then its OK and other longer life battery must be double then slim battery and of course, model number would be chan ... JVC Digital Cameras

I have old Olympus C-840L. After connect battery power 6V and switch ON camera or display electronic then nothing does not started. It seems that problem is in power switching circuit. Battery supply 6V DC is not connected to electronic due to some part is broken. I need schematic of power supply. Please, answer me if you can help me to my e-mail. Thank you.


... Olympus Camedia C-840L Digital Camera

Power problem I was charging camera using 4.5 DC volt socket on Camera, next I switch on camera so Lens head came out, accidentally power pin came off from camera and lens will not go back. Now nothing happening to camera when power cord connected or with battery, camera will not switch on at all including power lite does not come on with power cord connected. Look like it may have blown fuse in camera or something else serious. Any solution which I can try? I'm a very handy man with good too


I sounds like coincidently something in the camera failed. I doubt very much that simply pulling the power from the camera would cause damage. \015\012\015\012In anycase, if you were to open the camera, you would see that all the circuit ... Olympus FE-220 Digital Camera

I changed the batteries in my Power Shot A720 IS recently when the low battery warning flashed, and had taken only two photos when the warning flashed again. I moved the mode switch to playback and the screen went dark "Change batteries now" appeared. I turned off the camera, set the mode switch to shooting, turned the camera back on and was able to take two more photos before the low battery warning returned and prevented any more picture taking. I purchased and installed new batteries and f


Hi, 1st you must use alkline bat or minimum 800 mhp bat....and if problem is not solved then cheak the bat cap and connection clean with aomthing,,,,If any thing else contact [email protected] ... Canon PowerShot A720 IS Digital Camera

Power issues. Just recently I've encountered a problem with my camera. After plugging it into my computer (And not noticing the power surge notification on the desktop while doing so). It locked up and powered itself off. I tried turning it back on, and it turned on for a split second then shut off without retracting the lense. I switched batteries and it retracted the lense, but I tried powering it on and the lense only came halfway out and it powered off. I've tried 4 fresh sets of batteries a


You sdaid power surge on the laptop.\015\012Thus suggests that this may have affected the camrera.\015\012I would think a 'repair' if such is possible will be near the cost of replacement.\015\012Only Olympus can advise ... Olympus FE-115 Digital Camera

No power Canon XTi was working properly this morning. This afternoon there is zero power or it will not switch on. Took camera to one camera shop their answer was take it to the battery place and have it tested. We knew the batteries were properly charged and in working order but took them anyway. There are two different batteries and both tested full and in proper working order. Any suggestions? We have taken the battery out and let it sit.


Camera is dead i think it p fuse gone from md board. \012or camera is making battery drain everytime whe you insert battery.\012There could be main pcb or md baord or battery box unit.\012take it to canon repaire centre and tell the ... Canon EOS Digital Rebel XTI Digital Camera

Power switch The powers switch on my nikon d80 does not seem to be working. Battery is charged, making contact. Switch seems to be rotating smoothly. Internal circutry problem?


Make sure you are using a fully charged Nikon battery. Problems may sometimes happen with generic batteries. If you are using a Nikon batt, then seems you may need to bring this in for servicing\015\012\015\012NOTE: Please rate our hel ... Nikon D80 Digital Camera with 18-135mm Lens

No power I purchased a Canon 400D about a year ago and shortly afterwards the camera suddenly gave up on me. I took a couple of photos and then nothing. The battery was fully charged and the power light came on when the camera was switched on and remained on even when the camera was switched off. I was going to take the camera in to a service centre a few weeks later for repairs but when I switched the cameraon again, the problem seemed to have disappeared. Since then I have been taking photos w


This definitely looks like an issue with the Camera. I suggest contacting the Camera Tech Support immediately and request them to send the Camera to the service center. There are more Canon Rebel XTi owners, including me have experienced no-power iss ... Canon EOS 400D / Rebel XTi Digital Camera

Hi , My Fuji S9600 has just refused to power-up using batteries, although it still powers-up and operates correctly when i attach the mains PSU adapter. I wonder if this is a common occurrence on this model and how easy it is to get sorted. I have used rechargeable batteries since the camera was new (approx 3 yrs) and have tested the batteries as V.good. So i'm assuming that the problem is with the camera somewhere. Do you think if i reset the camera in the menu that would cure the problem , or


A few things here may cause the problem you have First the rechargeable batteries don't hold their charge like alkaline and will drop to zero or near zero voltage in just a few weeks. They may tun on a light but won't have enough power to operate a c ... Fuji Finepix S9600 Digital Camera

Samsung l380 digital camera. When power is switched on two beeps sound (the camera is out of focus)and you cannot turn off the power without removing the battery. New battery tried, but same result.


... Digital Cameras

I had my kodak camera, when i try to used it i didnt noticed that my wife put the battery not in a proper way or she put it inaccurately and the battery is full charge. so when i forced to switch it on, it on for a couple of seconds then the powers gone after that. so i try to ask what will i do to fix my camera it wont power anymore? pls help. thank you


Hi,Please run through the link below, and maybe they can help you with your warranties or on how to repair you camera. ... HP Photosmart 435 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1867 seconds