Having problems with your Kodak CX6330 Digital Camera ?
The problem is all my fault. I installed alkaline
\015 The problem is all my fault. I installed alkaline batteries in my CX6330 digital camera, now the correct batteries although charged, will not make it work. It just flashes red and stops. The lens does not telescope out, nothing works. I should have checked the manual before inserting the alkaline ones it explains very clearly NOT to use Alkaline batteries in it. Can it be fixed? Is it expensive?\015
Does the cam work with alkaline batteries?
I think you installed some wrong battery to your camer....
so at now you need to get it to a repair shop......
so at now you need to get it to a repair shop......
Repair Help & Product Troubleshooting for Kodak CX6330 Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
The problem is all my fault. I installed alkaline
Does the cam work with alkaline batteries? ... Kodak CX6330 Digital Camera
Battery Life My HP Photosmart 635 Digital camera has never operated properly since I got it. The problem is battery life. When I install new alkaline batteries or fully charged nicads, the batties die after 5 minutes wether the camera is on or off. I now use it as a paper weight.
This is a typical problem with these cameras. The culprit is a failed onboard battery. The battery is for retaining the time and date while replacing the removable batteries. If you put batteries in and set the time and date- then remove the batt ... HP Photosmart 635 Digital Camera
Wenn i install the disney pix video editing software my computor gives an fatal error and restarts. After the restart it keeps showing messages it can't install the camera drivers and software. I did an format c: and new windows xp installation. The same problem again after new installation. How to solve this problem? I think there's an error in the installation cd.
I'll apriciate your website and it came up high in the google list. But i bought a new product that doesn't work. I'm not willing to pay for a solution. So i looked a bit furder and posted the problem by digital blue. Waiting for a reply.... ... Disney Pix Micro Digital Camera
Installation Problem I cannot install the driver for my Digimax S800. I even downloaded the drivers to make sure it wasn't a problem with the disk, but it still came up with the same error message: "An installation support file could not be installed, the specified module could not be found" Can anyone please help?
Try NOT using a driver.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireW ... Samsung Digimax S800 Digital Camera
Lens Error I recently had a problem with my Casio QV-R4... every time I'd turn it on, the lens would retract and I'd get a "LENS ERROR" message on the screen. I talked to customer support and they told me that Installing the new version of their firmware, v1.01 would fix this problem. I've since installed the new firmware version, but I am still receiving the lens error. Has anyone else encountered this problem? Does anyone know how to fix it? Please help!!!
As solutions 1 & 2 indicate, lubing the gears works!! This is a great camera, so I hope all of the QV-R4 owners try this. I may become a maintenance item for the camera.\015\012 \015\012I have a few a ... Casio QV-R4 Digital Camera
I have recently installed the solution disk after realizing that the computer would bot be able to upload images from the camera to the computer because of a missing PTPUSB.DLL File. The installation of photo programs did not alleviate my problem. If my Microsotf XP enabled computer does not have such a file where can I download or correct this problem to upload my pictures that I have taken? If you can give me a website or direction besides refering me to my XP Professional start up disk, I wou
Do you really need the software?The best way to upload pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB o ... Canon PowerShot SD1200 IS / Digital IXUS 95 IS Digital Camera
PROBLEM CONNECTING A jvc gz-mg334hek hard disc camcorder to my computer, Software is installed ok. When camcorder is connected and powered up my compter says 'NEW HARDWARE DECTECTED'and starts the 'FOUND NEW HARWARE WIZZARD' after a brief attempt at connection the wizzard stops and says 'There was a problem installing your hardware , The Data is invalid' This means i cannot transfer any data from the camcorder to the pc or vice versa - Is there a solution to this.!!!
Hi sixthpistolI would try deinstall the software for the camera, then reinstall it, reboot then try the camcorder again. Be sure to install the software BEFORE plugging in the gear. I am more than happy to answer any other question ... JVC Digital Cameras
Hi, my problem is that i can transfer video film from my video camcorder to my PC. I instaled the original softwear disk and conected to my PC with USB cable but the PC didnot detect the cam like new hardwear. I founded and installed canon drivers for that type of model but the problem still there. Pease help.
Please confirm your make/model and the compatibility of the video. Any transfer from a camcorder must be in the digital format recognized by the PC, if not you will need the help of a decorder to convert , compress and digit ... Digital Cameras
Hi I recently purchased Canon Powershot Sd1200 IS. I installed the Solution Disc software but when I connect the camera to my computer there is nothing that tells me I have installed new hardware - the computer makes the ringing sound when I turn camera power on and off. Only the user guides show on my computer. Before this camera I had the Canon Powershot SD1000 and was able to download my pictures with no problem. Was told at Future Shop that it might be a problem with my computer. rnEmail
Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Canon PowerShot SD1200 IS / Digital IXUS 95 IS Digital Camera
Connection Problem I hope I'm posting this in the right place. I recently bought a Kodak DX4900 & installed the software onto my computer. After taking some photos, I tried transferring the photos to my computer, but it appears that my computer just isn't seeing the camera. I've uninstalled the software & re-installed it, defragged my computer & run a scandisk & the problem still hasn't been fixed. I'm not particularly computer literate at the best of times, and am stuck. I have a new camera tha
I had the same problem with my DX4900. After reinstalling software, etc it finally turned out that the cable that connects the camera to the computer was bad. Kodak has specs for the DX4900 on the ... Kodak EasyShare DX4900 Zoom Digital Camera
Olympus model FE - 170. I have just installed Microsoft Vista and keep getting a message that the camera is not being recognised even though it is properly connected through a USB port. I have installed the Olympus setup disc (version 1.0) but this has not solved the problem. I had no problems when using the same camera and software through Windows XP. Can you help?
Try pluggin it in and go to control panel and search and add hard were and see if there is any files missing or invallid \015\012even try uninstall and reinstall ... Olympus Digital Cameras
When I install a memory card in my camera I get the message read only memory card, remove write protection to capture or write to card. The switch on the memory card is in the correct position, this is a card that I have been using with no problems until now. I also installed a brand new memory card and got the same message. I think there's a problem internally with the camera.
... Kodak EasyShare Z740 Digital Camera
Installation problem When I am going to install Chameleon Digital camera in my Windows XP SP2 the system automatically reboots and the installation process does not complete and the system asks for installation again which results rebooting again. What should be the probable solution. It works with Windows98 perfectly.
Check the drivers here you may need the update\015\012\015\012There is one Chameleon Mega link on the page it appears to be the driver (no Vista Driver),There is a user guide and a setup guide on the far right. ... Largan Chameleon Mega Digital Camera
I have had my Philips webcam for 2 years. My son gave it to me and he installed it. I was not very up on these things and I have used it for 2 years without a problem. a couple of months ago I had a virus on my computer and we had to complete un load it and my daughter reinstalled everything but the cam. Because I didn't install it in the first place I had no installing dist or any other information to reinstall without a disc. I need to know who can help me install without a disc.
Http://www.p4c.philips.com/files/d/dmvc300k_00/dmvc300k_00_dxp_eng.zipdownload and install it.. ... Digital Cameras
Hi friendsi bought Kodak c182 12 mp digital camera a day ago. I tried to download Kodak easyshare software version 8.0 from a cd that was provided. during installation I was prompted "do I want to install latest version from the web or use my cd if nothing better can be found?" I answered "yes". installation took about 10 minutes and everything seemed to be going right. however at the end the installation process halted and gave me a message that it run into a problem. "do you wan't to send
Try NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or c ... Kodak Easyshare C182 12MP Digital Camera
UI have installed Kodak easyshare Sofware when I had windows vista so then my hard drive crashed and I have had Windows 7 installed. Koda Easyshare software was accepted but now when I intal the cable to download pics onto my laptop, it says the device failed to install so as a result I cannot download photos. Please, what can I do to rectify this problem? Thanks.
Try NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the c ... Kodak EASYSHARE M1063 Digital Camera
I am unable to locate the installation CD I had with the PV-GS13 camcorder I purchased quite a few year ago. The serial number is G4IA12045. I was wondering if there is a link to your website to run the installation from? There is a problem with the camcorder as it wants to eject the tape when it shouldn't but I have a lot of movies to down load and have no way of doing so. The computer I had the download program on crashed so I have to install the program on another computer.
The software provided was Panasonic DV studio.Panasonic does not distribute the software without a camcorder, for this reason there is no software download available. The link below is just update. To get the complete suite in CD call P ... Digital Cameras
Downloading pictures When I purchased this camera I connected to the PC and it installed immediately. Never any problems until my hard drive had to be replaced and I am unable to install again. I did not get a CD for installation and can not find a solution.
There is a guy in South Carolina that I think may have your CD. I think his email is firstname.lastname@example.org ... Panasonic Lumix DMC-TZ1 Digital Camera
My pc got reformat,then the technician didnt save the files of my matrix pc camera which i lost the installer cd, my problem is.. i want to install it back but i dont have the installer cd.what will i do?
Try the manufacture of the camera's web site ... Digital Cameras
Metz 45CL-4 not firing consistently... Hi, Have a problem with a Metz 45CL-4 flashgun. I may have damaged the circuit by rapid charging from an external NiMh pack whilst trying to form the main capacitor. Have done this previously, with this and other Metz 45s and it's always been OK. I normally get a full charge in about 2.5 seconds only now I have a problem firing the flash. Have reverted to testing with 6 good alkaline AA batteries (reading 9.06v on pack) but problem persists. Symptoms: - Loo
Hi Guys!\015\012I have had the same problem on CT-1 s and CT-5s.\015\012In both cases the flash cable (called PC synch cable) was to blame. If flash fires correctly with the test button on the handle, then cleaning the cable contacts with ... Digital Cameras
Trying to install philips funcam and the install wizard says there was a problem installing. i have windows xp
Hi and welcome to FixYa.\015\012\015\012Take the disk out and restart the computer. Put the disk back in and it should try to install again. If not, let me know.\015\012\015\012Rob ... Philips FunCam DMVC300K/00 Digital Camera
Pentax problems... Hey there. I'm having problems with my pentax camera. The camera actually works great, but, I can't sync it up with my computer. The software that came with it is not working with my pc. When I hook up the usb cable to connect the two, it never recognizes the device. I have a dell inspiron that's only about 6 months old. It has windows xp on it. I've never had problems installing a device before. I tried to add the hardware manually, over and over again with no luck. I heard s
Load any software first before installing hardware ... Pentax Optio 60 Digital Camera
My name is Chris and my wife just bought a Panasonic DMC-TZ5 digital camera. I was trying to install the hardware to my computer and have the installation disc. Everything is loaded onto my computer, but my computer consistently says that the "USB Device Not Recognized". I went to troubleshoot the problem and it says that "there are no drivers installed" in my USB port. I'm currently using Microsoft XP Professional. I'm running out of options. I'm not sure if my computer is compatible with
I use a memory card reader (about $15) to retrieve photos and toss the software that comes with the camera.\015\012\015\012Another possible solution would be to go to panisonic.com and download the latest software.\015\012\015 ... Digital Cameras
My webcam i go to use my webcam and it come up error and says "this application has failed to start because kdu_v32r.dll was not found. reinstaling the application may fix this problem I cannot open my id on yahoo messenger so i did was re install the messenger but before it was completly finish it says that kdu_v32R.dll was missing and by reinstalling it again, it will fix the problem. I did as the command says but i end up with the same problem. I cannot open my webcam when im using the messe
Try posting problem in the correct area, this one is for Canon Digital Cameras. You may get the response you are looking for. ... Canon Rebel XT / EOS 350D Digital Camera
PC-CAM 300 Driver installation problem
Hi \015\012I am waseem my camera canon ixy digital 300 drivermodel no :pc 1008 problem is i search internet you solution my problem\015\012\015\012\015\012i watting your anser ... Creative Labs PC-Cam 300 Digital Camera