Having problems with your Kodak Digital Cameras ?

I have a Kodak M1033 and sand got inside of it. I tryed blowing all the sand out but when I try to turn it on the screen it just black or it flashes blue and says camera #E12 see user guide. The lens is also all the way out and won't go back in. Is it possible to fix?


Answers :

Fixing a Lens Error on a Digital Camera
\012
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Kodak Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Kodak M1033 and sand got inside of it. I tryed blowing all the sand out but when I try to turn it on the screen it just black or it flashes blue and says camera #E12 see user guide. The lens is also all the way out and won't go back in. Is it possible to fix?


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Kodak Digital Cameras

Camera error # e45 canot get lens to go in . Lens will not go in it says on back Camera Error # E45 sEE USERS GUIDE i CAN NOT FINE USERS GUIDE THE gUIDE i GOT ON COMPUTER IS IN gERMEN


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Kodak EasyShare LS443 Digital Camera

Hello Hi! My Kodak Easyshare V530 camera I bought about 2 years ago has been doing great, and all of a sudden after taking a pic the lens will not retract and it says "Camera Error #E45" I just moved and can't find my user's guide to see what this means. I have looked it up online and can find no answers. I leave for a trip to Honduras on Sat. and would love to have a working camera. Help please! Jessica [email protected]


Wekkkkc kvjbc dhbas jbsa \015\012\015\012\015\012pick ur nose\015\012then eat them ... Kodak EasyShare V530 Digital Camera

I turn my camera on & it says "camera error #e45 see users guide" what should i do i lost my users guide


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that you will ... Kodak EasyShare V570 Digital Camera

I have kodak ls443 get error message camera error e45 and it says see users guide. i have looked in users guide but cannot find andy info re error e45


HelloFirstly, at the link below you can download a updated softcopy of the manual for free.http:// ... Kodak EasyShare LS443 Digital Camera

I have the Kodak EasyShare V530 and every time i turn it on it gives me a message that says "camera error #E45 see user's guide" then it turns off. Unfortunately i dont have my user's guide. Is there any thing i can do to fix this?


Http://www.retrevo.com/search/v2/jsp/downloadPage.jsp?doc=21cc7420d5ae338b61a176f16d1146f3&modelid=200385&q=Kodak+V530Here is the link to download your manual.The error code indicates that there is a stuck lens issue. ... Digital Cameras

I have a kodak easysharecx7330 and and there is something wrong in the window it say camera error #e45 see user's guide and it was a gift and i don't have user guide


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Kodak EasyShare CX7300 Digital Camera

Just plugged my camera into the dock and it it says Error e45 see user guide except I dont have any information about it in the user guie


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that you will ... Kodak EasyShare LS443 Digital Camera

When I turn my camera on it says Camera error #E45 See user's guide.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed ... Kodak EasyShare One Digital Camera

Cam sayes camera error#e45 see user's guide what do i do to fix it


Solution for me: Strike the camera a few times. Error gone.Seriously - I got this error on a very humid day. The error seems related to the lens moving mechanism. My V570 is 4 years old, not really worth the expense to fix. So .. a co ... Kodak EasyShare V570 Digital Camera

It turns on and its says camera error E45 see users guide


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will hav ... Kodak EasyShare V570 Digital Camera

When i swich on it says camera error ''E45 see users guide.


E45 error code indicates the lens of your camera is already defectived. You need to contact Kodak at 1 800 235 6325 ext 12. Your camera needs repair ... Kodak EasyShare Z700 Digital Camera

Lens error i brought my camera to the beach and sand got on the camera. i got a majority of the sand out, but the camera continues to say "lens error". help!!


The very smallest piece of sand will jam any digital camera lens. You should be extremely careful to never allow sand to get anywhere near any digital camera. The gears are very small, thus the smallest piece of debris will do a lot of damage. To rem ... Nikon COOLPIX L3 Digital Camera

Lens Error When I turn camera on, green light flashes and a message comes on screen: Lens error, restart camera. The lens is permanently out. Have not dropped camera, don't know what's happened and am not very technical so don't even know how to restart camera! Can't find anything in the Basic User Guide to help me.


It is just telling you to try to turn the camera off and back on. This usually doesn't self correct and will need to be serviced. I would call Canon for support and see what the options are for service or upgrade.Hope this helps! ... Canon PowerShot A460 Digital Camera

My camera was dropped in the sand yesterday, and now when i turn it on it says lens error. I removed as much of the sand as i could reach, and blew out a good portion of it, but it still wont turn on without saying lens error. what should i do?


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Canon PowerShot SD1300 IS IXUS 105 Digital Camera

MID#0010109 Bought it last week...worked fine with the battery that came in it...put a new battery in it and now it doesn't do anything....?????? Can't see a model number on it or any of the paper work...it says Digital Camera Lens on top of the lens and 1-40 F 25 under it...it is a tiny camera, that also does video and acts as a webcam...very, very small...Please help?? Also has a sticker on the bottom that says...MID#0010109


... Digital Cameras

Today i went to a beach nad my camera fell in the sand. After taken it out when i switch on, the lens does not move at all. It is stucked because of sand and on the screen it says "lens error, restart the camera". So in order to get it fix, what should i do? for information, i bought it from best buy in houston last thanks giving.


Sorry to hear that shivamfc. You are an unfortunate Canon user with the unlucky results of digital camera + sand = dead.To make the camera to work again, you need to be sure to remove the sand that got inside the lens mechanism, unfortun ... Canon PowerShot SD880 IS Digital Camera

My Sony DSC-W80 camera displays "Turn the power off and on again" after the lens make several efforts to protrude fully. The last time I used this camera, I was under the impression the battery had died, and indeed, it was rather low. But now the battery has fully charged and it will not work. I did not bang the camera on anything or drop it. The camera case for it is kept clean of dirt, sand, etc. There is no visible debris on the visual lens themselves that I can see in the few attempts it


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Sony Cybershot DSCW80 7.2MP Digital Camera with 3x Optical Zoom and Super Steady Shot

I have an australian version of the canon digital ixus 70 camera and the bustards wont fix it cause they say it has sand in it ??they choose the easy way out this is still under waranty. Anyway the camera wont turn on on a fully charged battery the camera is just dead i cant see what sand has to do with it??? .after they take your money they dont want to know you???buy the way i am from australia any advise would be very thankfull bye


Ok try this, maybe they've got tired of taking easy money of $90 for the fix\015\012\015\012This is not a joke........\015\012Use a can of compressed air and blow around the lens while it is extended. Even if the lens wont extend st ... Digital Cameras

Will i was taking picture and my camera fell and my lens broke i turn on but it only says len erro my camera is good it just the lens that dont wole so am trying to see how much will it be to fix it


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Sanyo VPC-E760 Digital Camera

Camera is not turning on .camera error e45 see users guide apairs on screan I experienced the same problem with my c643. The camera do not turn on with fully charged batteries. All I can see is a blinking red light.


You might want to try a fresh set of energizer lithium batteries. Have found many cameras require more ma's that rechargeable batteries can supply. ... Kodak EasyShare One Digital Camera

The lense cover wont come in and it just show a message that says error #e45 see user guide i went back to the user guide and i find nothing so please help me what to do please please i relly need your help


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Kodak EasyShare V610 Digital Camera

My samsung nv24hd has had its lens stuck open, so I got it to closed carefully. Now whenever I try to turn on my camera, the lens will not open. The screen says samsung, and it freezes. I am able to see the pictures and videos on my camera, but I can't take pictures. It either beeps 3 times, or it freezes with the samsung logo on the screen. Is there anything I can do?


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Digital Cameras

Just purchased an powershot SX1 IS. I took one photo, zoomed in on it to see how clear the zoom was once taken a photo. THen it switched itself of with the lens still out. Now when turning it on it has a black screen and say lens error...restart camera. I have tried holding func. when turning on the camera and the time comes up on the screen. But as soon as I let go of func I get the error msg.


Hello if you just purchased this unit Then i advise you to take it back, this sounds like a system control issue or main board problem. Holding the function key while turning is factory reset, if this is not working right them the camera has a bad sy ... Canon PowerShot SX1 IS Digital Camera

My ge a730 camera says lens error when i turn it on. the lens comes out then goes back in, then the camera turns itself off. it could have sand in it because we are at the beach. any suggestions? thanks, stacey


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... General Electric A730 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6925 seconds