Having problems with your Kodak Digital Cameras ?

I have a Kodak EasyShare C143 serial number KCGMU03223587 and this is my second one since August of this year. I had the same problem with both. The first one I was able to exchange, but the second one I can't since I haven't been able to find my receipt for it. The problem is I go to turn on the camera and the lens goes out so far and that is it. No screen or anything. If the screen does happen to come on it is on for like 2 seconds and it goes off. I take the batteries out and exchange them wi

Answers :

Fixing a Lens Error on a Digital Camera


This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart camera". Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.

The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many cameras, and NEVER use a case for this very reason.

A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.

Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.

The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:

Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.

Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.

Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.

Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.

Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in "no heat" setting, or sucking the gaps with a vacuum (careful with this one).

Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.

Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.

Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.

Repair Help & Product Troubleshooting for Kodak Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Kodak EasyShare C143 serial number KCGMU03223587 and this is my second one since August of this year. I had the same problem with both. The first one I was able to exchange, but the second one I can't since I haven't been able to find my receipt for it. The problem is I go to turn on the camera and the lens goes out so far and that is it. No screen or anything. If the screen does happen to come on it is on for like 2 seconds and it goes off. I take the batteries out and exchange them wi

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Kodak Digital Cameras

E18 my canon powershot A150, got the whole E18 problem, it turns on with the blue canon screen, but then two seconds after it turns into a faded black with E18 in the bottom left hand corner. i seriously dont know whats wrong, and it hasnt even been a year since i got the camera, is there any way i can fix this problem? because at the moment buying a camera, my parents would not be too pleased :| it turns on with blue screen then it goes black and it says e18

E18 is the canon fault number for lens error. Is the lens stuck out? does it click when the camera is switched on? Try lightly tapping the lens on a hard surface. This sometimes resets the lens. If all this fails take it to bits! (but watch the flash ... Canon PowerShot A400 Digital Camera

My L730 was knocked off the table and seems to have now jammed, when I turn it on it makes 3 loud beeps then the screen goes blank. The power light stays on but it doesn't seem to be attempting to do anything. The lens is still out. I've tried removing the battery and waiting before replacing it then turning it back on and I've also tried gently manually moving the lens but the problem persists. Very Infuriating as I recommended this camera to others, 2 of which have bought one since !! Can anyb

Hello.Your brand of camera has very little to do with your problem. This has to be one of the top digital camera problems of all time. There is a very good solution here on fixya click the link below.And please give the author thumbs up,he's explaine ... Samsung Digimax L730 Digital Camera

After every picture I take the screen goes black for a couple of minutes so I cant take more than one photo at a time. I have to power the camera off and turn it back on to take a second pic. The battery is fully charged and the camera is fairly new and lightly used. Any idea how to correct the problem?

Are you using a cheap card? Is the card full with a large number of pictures? ... Nikon COOLPIX S10 Digital Camera

When i turn the camera on, it immediately shuts down after showing the picture on the screen for about one second. The lense first comes out and then rapidly goes back to the case of the camera. What is the problem here?

Low battery ... Casio Exilim EX-S600 Digital Camera

Lcd problems When I turn the camera on, the screen is very dark. I have tried all the settings on the camera to make it brighter but that hasn't worked. I am still able to take pictures and when I transfer them to the computer, they come out normal. I noticed earlier that the screen went brighter for a second and then turned dark again. I think there may be a problem with connection.

Hey amb151,\015\012 From how you describe the problem it sounds like you probably do have a connection problem, but the only way to really know is to have the camera looked at by an authorized service technician such as bringing the cam ... Kodak V803 Digital Camera

I hit the power button and it turns green for a second but then goes out. The camera and LCD screen do nothing. So I have some sort of power problem. When I put the battery in the charger the charger light comes on for about a 10seconds but then goes out (suggesting that the battery is fully charged). Is this a battery problem (not charging or holding a charge) or a camera problem? I don't want to buy a new battery if the camera itself is dead... Thanks!

Hi i have struggled with this within few months of buying the camera.\015\012Both the charger and camera are not making a good connection with the battery. i clean with alcohol, this usually helps with the charger. When powering up in camera i ... Sony Cyber-shot DSC-W120 Digital Camera

Hi, I am having S2 IS camera.... Haven't used it for the past 6 months....now facing one problem. I brought new rechargable batteries, charged them properly for about 9 hours and then tried to turn the camera on. Although the Camera turned on, only a blank screen came and nothing was visible. After just 10 seconds, it started showing the message "Change the batteries". Please help me in understanding the problem

First, are the batteries inserted correctly? Try cleaning the battery contacts in the camera with a cotton swab lightly dampened with rubbing alcohol. ... Canon PowerShot S2 IS Digital Camera

Pretty much constant but sometimes intermittant problem of the camera fe-210 screen goes black. all functions appear to be normal but it does not see through the lens. So everything is black on the pictures taken. It's like the opening is shut. Sometimes it will work when first turned on for one or maybe two exposures. then it goes black and may stay that way even if turned on and off or changing any of the settings.

Hi,Would you be able to View Recorded images / Video's ?If\015\012\015\012\015\012 yes, this is a Faulty CCD Sensor. This is a Common Problem on almost \015\012all the Brands like Sony, Kodak, Canon. There were Certain Recalls ... Olympus FE-210 Digital Camera

Black screen Hi, I have a Powershot S1iS (CANNON), and it worked just fine for about 2 years now. Last week - suddenly the screen went black, and I can not see anything. When I switch to see the pictures I've taken before, I am able to do that, and I do see them. When I try to take a picture - I'm able to, but the picture is black. Can it be a memory card problem (since it's a new one, and I didn't swap it, to verify that). Thanks - Shlomi [email protected]

Someone else posted that Canon fixed it for free. \015\012\015\012Here's a link to the Canon service site that explains their take on the problem. Yes they will fix it if it is indeed a CCD issue.\015\012\015\012 ... Canon PowerShot S1 IS Digital Camera

Black Screen I have taken really good care of my camera and it has never been dropped. I went on a Cruise a few months ago and one day into the cruise the screen wouldn't show anything. It was just a black screen. When I took pictures they turned out black too. I am still able to navigate the menus and see pictures on my SD card. Even after returning to Colorado, a dry climate, the screen is always black and taking black pictures. Is there something I can do to fix this problem or should I just

... Nikon COOLPIX L18 Digital Camera

My sony I just got a DSC-S40 from a friend. I actually swoped my previous camera for this one. When I switch it on, the lens seems to get stuck and not come out all the way. I makes a grinding noise and does not show any picture on the screen. The flash goes off when I push the button, and the little guide dots on the lcd screen shows, but the the screen stays black. I am able to view the photo's that are on the camera taken before this problem, but am unable to take any photo's now. The shutter

I can fix your camera, it is not an easy thing to post because the post would be forever long....$20 and it would be good as new. ... Sony Cyber-Shot DSC-S40 Digital Camera

Hi there, I have a Canon Powershot S3IS and just lately when you try to turn it on it comes up with a message that says E24. I have looked through the manual and cannot find anything resembling this message. It turns on for a few seconds and then the screen goes black and displays the E24 message. I was taking photos during a recent wedding I attended and then it cut out suddenly and displayed the E24 and since then will not turn on. Please help me as my brother and his family are arriving soon

... Digital Cameras

My sony digital camera won't fully turn on. when you push power the screen stays black but it says access and the lenses repetitively goes in and out with a 3 second pause between. then finally it stops and says to turn the camera off then back one. but this keeps occuring and it won't fully turn on. HELP!

There is some problem with your sensor in lens so only you are getting this problem .......so better check the sensor..... ... Digital Cameras

I am able to transfer images to my computer, but when I try to turn the M893 camera on when it's not connected to my laptop, the screen comes on for a second or two, lens comes out, green light is on and then blinks and turns red and blinks and then lens goes back in and camera turns off. I've tried removing the battery, wiping it off, putting it back in, camera also wont charge. It's never gotten wet or been exposed to extreme heat

It has problem on the lens. Lens doesn't extend when transferring pictures that's why it works. Kodak cameras are designed to automatically shut-off when the lens is struggling to go in or out.Follow step-by-step solution and repair on ww ... Kodak Easyshare M893 Digital Camera

Fuji s9000 problem, it won't turn on with the ac supply at all. The last time I used my camera I put in some rechargeable batteries (new ones) while the camera had the ac adapter connected, I was just seeing if the new batteries had charge on them or not. Well, after a while I came back to my photo booth and my camera had a white screen (lcd) and so I unplugged it at that time thinking maybe it was charging the batteries or something. Well today around a week later I am not able to turn my ca

... Fuji FinePix S9000 Zoom Digital Camera

I have purchased two Kodak C143 Digital Cameras since August of this year. The first one, only had for a couple of weeks, worked great at first and then when I would turn it on the lens would come out but there would be no screen at times. At other times the screen would disappear after a couple of seconds, but the lens would not close. I tried taking the batteries out and putting back in, but that did't help. I then took it to K-mart where it was purchased and they told me that it must be the c

... Kodak C143 Digital Camera

When I turn on the camera, for few seconds it shows the image trough the lense, but inmediately it seems to turn off, and this legend apears on the screen: D5 f 08 5 f 0a 5e02 5 f 085 e02 the battery is ok, the memory stick appears to be ok, so I assume is a software problem. how can i solve this? I do not have the disk of the camera since my son lost it.

The error is a lens motor error. The lens is not able to properly move and the camera then gives the error message. Sometimes dirt can be stuck in the lens or it could just be a mechanical problem that needs repairs. If you point the camera lens towa ... Olympus Stylus 710 Digital Camera

I have a SONY Cybershot DSC W150. When I turn it on the lens goes kut and comes back in several times, then I get the error message "Turn the Power Off and On Again", but doing that does not change anything. This is one of four digicams I own (also a Nikon D90, SONY DSC F717, and a Canon) and I like the W150 for some purposes because it is compact and has a viewfinder, not just a screen. I have been unable to find a similar camera. What can I do to fix the problem? Gerry Meisels [email protected]

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\01 ... Agfa Cyber-shot DSC-W150 Digital Camera

When i turn my camera on the screen looks like a black blob with lots of rays shoting from it. this is the second camera that has done this to me. when the first one did this i thought it had been dropped. i threw it away and bought another. now it has happened to this one. what is the problem? dian

... Kodak EasyShare C613 Digital Camera

Zoom Error Just bought an Olympus SP550 Ultra Zoom for my daughter. In less than 24 hours the cam developed a problem. When she turns it on, the zoom lens goes part way out, a message "zoom error" shows on the screen, and it powers itself off. We thought it might just be the batteries, but new ones didn't help. Similar problem with SP-560UZ On power up lens clicks & sticks when zooms out. Then get "zoom error" & powers off. Tried new batteries, helping lens out. Leaving batteries out. Could not

I think a grain of sand was blocking the zoom tubes. This will not work if the camera has been dropped & the zoom apparatus is bent. It is entirely at your own risk & may invalidate any guarantee but they may charge anyway if you have got san ... Digital Cameras

Lens stuck I have had this problem twice with this camera, the first time I exchanged the camera for a new one. The second time the batteries went dead and the lens was out. It won't turn on and makes this beeping noise when I do try to turn it on. I tried changing out the batteries, but nothing seems to help.

Here is how I fixed this problem. I grasped the lens around the base (larger part) like you would if you were going take off a beer bottle cap. Very gently while sliding my thumb and index finger around the lens, I rocked it back and fort ... Polaroid I533P Digital Camera

Access Message Whenever I turn the DSC-W70 on it displays a black screen and the word "Access." At the same time the lens extends and retracts, however unlike some of the other problems people are having, the lens is not getting stuck. Also I also notice a faint clicking/buzzing sound from within the camera when the lens is still and not retracting/extending. After about 10 seconds it begins to beep and displays the message "Turn the power off and on again." I am able to view previously taken ph

Could not believe it but it worked for me as well. First time I see that a good smack makes it work ... Sony Cyber-shot DSC-W70 Digital Camera

I have an Olympus tough 3000 wich seems to turn on and off when I try to power it on. the screen goes on and off every second. Not possible to take pictures. (this happens every time unless it have been connected to a computer. read further down) I wondered if a hard reset, installing the firmware once again could solve the problem. I have no problems in connecting the camera to mac computer. It can read whatever that is inside the memory card. If I disconnect the camera after it has been con

Hi,I'm sorry to know that the Camera is turning off and on again. I'll be glad to assist you with this. Please make sure that the battery in the Camera is fully charged and is holding the charge for making the Camera to turn on. You ... Olympus ? Tough 3000 / Stylus Tough 3000 Digital Camera

Access Message Whenever I turn the DSC-W70 on it displays a black screen and the word "Access." At the same time the lens extends and retracts, however unlike some of the other problems people are having, the lens is not getting stuck. Also I also notice a faint clicking/buzzing sound from within the camera when the lens is still and not retracting/extending. After about 10 seconds it begins to beep and displays the message "Turn the power off and on again." I am able to view previously taken ph

This is a hardware problem. Your simptons is tipical of a lens position sensor being faulty.\015\012\015\012There is however nothing you can do yourself. Contact your nearest Sony dealer and take the camera to a Sony service centre. ... Sony Cyber-shot DSC-W50 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4184 seconds