Having problems with your Kodak EasyShare C160 Digital Camera ?

Kodak EasyShare C160 is detected and shows up in MyComputer for WindowsXP but does not for Windows 7. When plugged in, a connection sound is made but the device doesn't show up in MyComputer. How to fix? What's wrong?


Answers :

You PROBABLY need the correct drivers to recognise the Camera.

Go to Kodak and see if they have upgraded drivers for Win 7
Repair Help & Product Troubleshooting for Kodak EasyShare C160 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Kodak EasyShare C160 is detected and shows up in MyComputer for WindowsXP but does not for Windows 7. When plugged in, a connection sound is made but the device doesn't show up in MyComputer. How to fix? What's wrong?


You PROBABLY need the correct drivers to recognise the Camera.Go to Kodak and see if they have upgraded drivers for Win 7 ... Kodak EasyShare C160 Digital Camera

Screen my camera turns on fine, but nothing shows on the screen. i fully charged the battery and it still doesn't show anything on the screen. you can take a picture, but the screen is still blank. when i tried to connect my camera to my computer it said connection fail!...does anyone know how to fix this?? or what's wrong at least?


The screen can be switched off to save power! Make sure screen is set to on position ... Sanyo VPC-E760 Digital Camera

I have a coolpis L18 camera and when I connect to the pc it show that is connected but doesn't show pictures and appear i/o device error


Consider NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer ... Nikon COOLPIX L18 Digital Camera

My camera it's connected with the pc but don't show the pictures or the videos(connected in mass storage) and in Scanner camera it shows, what's wrong?


Try NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or c ... Sony Cyber-Shot DSC-W530 Digital Camera

I go into setup on the camera to turn on the shutter sound how-ever when i switch back to the men u it doesnt show that i have turned it on, and when taking a picture it doesnt work. Is there another option i have to turn on the make the shutter sound work when taking a picture?


You Can not have Continuous Shot, Or BBC on if you choose to have a shutter sound. Both must be shut off in order to achieve shutter sound. ... Nikon Digital Cameras

I have lumix dmc-lz7. Tonight I put a 2 gig sd card into my built in card reader , Dell pc and it didn't work and did not even show the drive on computer. Then, to check it out, I connected camera to usb port and it then worked with the reader and showed the drive on the comp. Why doesnt card work alone in reader?


Maybe the card reader is not SD/SD HC compatible, the same problem occurs wiith the Memory Stick Pro/Duo of sizes 2GB or above in my Desktop Computer (Compaq) and not in my Notebook (Compaq) the card reader and the machine are newest and are compatib ... Panasonic Lumix DMC-LZ7 Digital Camera

I have a Polaroid i533, when I plug the USB cord into my computer, connect it to the camera, turn the camera on, no mass storage device is showing. Windows XP supposed to be plug and play. I bought a card reader, and when I plug that into my USB port, and insert the 2.0 GB SD card, it shows drive F on MY COMPUTER, but says there is nothing on it, insert a disk into drive F. What the heck? How do I get this card reader to work? Thanks!


... Digital Cameras

I'm trying to upload pics from my Z8612 IS digital Kodak camera and am continually getting the following message: "Camera is in use Please try again later" Not sure what I'm doing wrong. Camera is connected to my computer and icon shows up but when I go to get pics is when the error message shows p


Use a card reader to download your pictures to a folder you create on your desktop. ... Kodak Easyshare Z8612 IS Digital Camera

I have a C-3030ZOOM. Had a HD failure and re-instaled CM 2.01 and updated to V2.3 that is running MS OS XP Pro. The computer is unable to recognize camera. When I connect the camer to PC via USB - I do not hear the "Bong" sound when new device is added. Going to Contol Panel to add devise, it says that drivers for device not installed (Code 28). Hardware update wizard cannot locate drivers. Loaded W2000 drivers. Rebooted PC. Started Olympus Master V2.3 and went to file to upload images from c


Presumably you downloaded this, extracted files and right clicked inf file and clicked install?\012Did you then reboot and try to connect the camera? Connect then switch camera on? ... Olympus Camedia C-3030 Zoom Digital Camera

I have a Samsung Miniket VP-MS15 digital camera, i cant seem to transfer only the pictures to my computer cause when i connect the camera through a cable the picture folder (DC..) doesnt show but the folder that contains recorded movie show.... please explain how i can transfer pictures to my windows 7.


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Samsung Miniket VP-MS15 Digital Camera

Fujifilm S1800 camera, 4GB card, over 2 GB full. Windows XP. When trying to download pictures, neither the Adobe nor Windows program will fetch pictures. I get a "device not connected or busy" message. Tried on another computer running 7. The folder shows up and can get to the DCIM but then it shows as 999_Fuji and 0 items. Have not tried/do not have a card reader. Any help??? Thanks!


Boss u ahve viruses in yr mem card.\015\012just use nero burn cd rec.soft to explore yr card in its menu\015\012\015\012or\015\012\015\012in the winxp address bar type the name of yr pic.folder it will open\015\012\015\012or\015\01 ... Fuji Finepix J20 Digital Camera

I wanted to get my pictures on my computer and i followed the instructions on how to connect the software so my pictures will show up but a dialog box doesnt pop up and its not even under my computer when i connect my Nikon Coolpix S8000 to my computer


Do what the pros do...use a card reader. ... Nikon COOLPIX S8000 Digital Camera

I can't get photos to upload from my Canon S500. Always in the past I just made the USB connection and I got a dialog screen telling me what to do. Now I have a new computer (running Vista, just got my Windows 7 upgrade and haven't loaded it yet), and it gave me a short message about "driver installed and then nothing--no icon, no nothing. It does make a sound when I connect and disconnect the camera. I went to the Canon site and they say there's no special software to download for this.


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Canon PowerShot S500 IXUS 500 Digital Camera

I have a Canon IXUS 960 IS. The screen shows no image when taking a photo yet shows menu information and works fine for playback. Is this a fault or have I accidently made a wrong setting somewhere. Any ideas. Thanks NC


Try pressing "DISP." which is the small button on the bottom left under the thumb-wheel. That turns on or off the LCD in shooting mode. In Playback mode, it shows shooting information etc. ... Canon IXUS 960 IS Digital Camera

I cannot transfer from my camera to the computer all the time because it doesn't always sinc up. The icon on the bottom left doesn't show up showing the camera connection and easyshare message says no device located but sometimes it does work. Thoughts?


I never use the stupid docks and stuff like that I find them as useless as you have just described. I just take out the memory card and place it into a memory card reader and then it acts like those usb dives showing up as another drive and you can g ... Kodak EASYSHARE CD33 & Printer Dock Series 3 (Pack) Digital Camera

Hi, I have an Ixus 870 but my computer cannot detect the device when I connect it with the wire provided. Can you advise what can be wrong? At first I didn't install zoombrowser (which I thought I did not need), but now even after installing, the device cannot be detected. THanks!


First thing will be to download or update the driver. You can get it for free on manufacture's website and sometimes other sites as well. Then after it is dowloaded, then double-click on the file so it installs into your registry. After it installs i ... Canon Digital Cameras

Hello my camera was working fine when i plugged it into the computer. now all of a sudden when i connect it- zoombrowser does pop up and the camera doesnt connect. i am not sure what i did wrong. in the process of cleaning up my computer- i may have accidently erased something i needed !! HELP


I would go out to canon usa and click on download updates and find your camera and download the software there. This should help you. ... Canon PowerShot SD600 Digital Camera

I try to connect Usb but it won't connect and doesnt show up?


... Konica E-Mini Digital Camera

Sir, My computer is showing me an error when i try to open the camera. Shown error by the computer is "Creation of the video preview failed. Please check the device connection and make sure that the device is not being used by another application or user." Sir i request u to please solve my problem.. Your sincerely Sumit kumar singh


That means that another program or device is using the camera or video. try to unplug the camera then plug it back in. also make sure you have other windows close, like a video viewer, other programs. ... Digital Cameras

When I plug in my camera, I get a Windows message that it does not recognize the device. The camera does not show up in "My Computer" as a storage device and there is no way to select the camera to acquire the pictures. I think my 3-year old unplugged the camera when it was connected.


Change your usb cable This error comes when most of bed usb cable.Also try your camera in another usb ports.Right click on my computer icon then click on property then click on hardware ->device manager.Then uninstall all usb dri ... Panasonic DMC-TZ5 Digital Camera

Hi, I have a Sony Cybershot T200, i droped it camera stoped showing anything else on screen. I mean it looks like lens cover closed, everything is working, its taking photos and video but they are all blank.Zoom is also working, i can see that zoom symbol is moving on left upper side of screen. I checked the connections but nothing seemed wrong to me. What should i do to fix it. Thanks for your help.


... Sony Cybershot DSC-T200 Digital Camera

My Samsung S1060 digital camera is malfunctioning when i turn it on. The green light turns on for a few seconds and the screen remains blank, this is then followed by three odd-sounding beeps and then the camera turns off. It seems as though the shutters on the camera cannot open. I have tried replacing the batteries and connecting it to the computer and it made no difference, please help.


Hello. I want you to turn on the camera and find the reset function in the menu. Push reset and and reset your camera to factory settings, like the day you got it. IF that doesn't solve the problem you may have dust in the shutter mechanism which ... Digital Cameras

Hi there. I've just bought a remote shutter/controller JJC JR Series Infrared Controller,for my Panasonic DMC FZ50,but it doesn't work at all. I don't know if I'm doing something wrong or if is the gadget that is faulty. I don't know if the light on top of the receiver should be on,because is always off(no light); I don't know if I have to program something in the camera before connecting the device; I don't understand why even if I do everything as the instructions say,nothing ha


Hi,\015\012\015\012With this camera you need to activate the power save mode or the remote will not operate.\015\012\015\012To activate it do the following\015\012\015\0121) Press menu set and then press the left a ... Digital Cameras

When connecting to computer shows up as usb devices malfunctioned remove and replace


Use a card reader instead of your camera. ... Fuji FinePix F810 Digital Camera

My kodak m1063 digital camera, is coming up with the error Unrecognised file format when i try to review pictures.It is the same memory card i have had in it since this time last year and no problems till recently.When i try to put memory card into computer to get files off so i can format, it doesnt show up as connected yet switch is unlocked? how can i fix everything please?thank you


There are several cause of "error Unrecognized file format"\015\0121. Check if the file save in your memory card is ".JPEG"\015\012 "To check it. Open one file or photo on your memory card using your compu ... Kodak EASYSHARE M1063 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2573 seconds