Having problems with your Kodak EasyShare C330 Digital Camera ?

I have a kodak easyshare c330 digital camera , the screen on the back of the camera only works for less than a 1 second when i 1st turn the camera on , then it never shows anything at all thats the problem , i cant access the menu or anything so id appreciate it if someone could help if not thank you still

Answers :

1. Make sure you will install a new or fully charged battery/batteries into your camera. Please use lithium batteries Ni-Mh or rechargeable Batteries (2000 M.Amp or higher). 2. Clean the battery contacts. a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a soft, clean cloth. b. Reinstall the battery/batteries into your camera 3. Turn on your camera without the memory card. (If it works then it?s your memory card that is faulty) 4. Please also try to upload new firmware: I doubt that it will solve the issue, but the alternative is a repair. Connect the camera with the computer. Turn the camera on. Click onto the link and follow the instructions. http://www.kodak.com/global/mul/service/downloads/DownloadLookup.jhtml?pq-path=10725/10807&product=EKN033025
Repair Help & Product Troubleshooting for Kodak EasyShare C330 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a kodak easyshare c330 digital camera , the screen on the back of the camera only works for less than a 1 second when i 1st turn the camera on , then it never shows anything at all thats the problem , i cant access the menu or anything so id appreciate it if someone could help if not thank you still

1. Make sure you will install a new or fully charged battery/batteries into your camera. Please use lithium batteries Ni-Mh or rechargeable Batteries (2000 M.Amp or higher). 2. Clean the battery contacts. a. Remove the battery/batteries and the memor ... Kodak EasyShare C330 Digital Camera

I have a Fujifim finepix f47(fd) The camera was working fine until last week, basically I can turn the camera on fine and use all the menus etc. My problem is after I take a photo the camera crashes/freezes and thats it you cant do anything else unless you take the battery out however im back at square one again. I have tried using the camera without an sd card as the camera itself has some internal memory. Same problem.

Your camera needs to be formated by memory and need a good Anti virus for SD memory card.. its NOD32 best you USB's and Memory cards ... Fuji FinePix F470 Digital Camera

The camera when switched on displays in the top lcd display 'Err' yet shows battery as fully charged. ive reformatted my memory card via pc. changed the lithium cr 123a batteries for new ones. fully charged the 4 x AA batteries. the aperture ring lock is set to 22 on the 28mm-80mm af nikkor d lens. i have it set to af and auto but have tried all other camera setting i can access. it will focus no problem yet will not allow me to do anything else. i cannot access the menu eg func, play, in

Hi.Err means that the camera is in fault mode. There is no code, so that the fault is generic. This kind of error is often associated with shutter problems or other loens error. If you have a spare lens, remove battery and test the spare ... Fuji FinePix S1 Pro Digital Camera

Dark LCD I have an A70, about a year old. The problem is the LCD screen is very dark. It is almost completely black unless I point the camera dirrectly at light. If I take a picture with the viewfinder the picture is exactly what the LCD screen looks like. This happened as we were using the camera. I also cannot view any of the pictures in the camera. I no the display is not completly out because it works to access the menu screen. It wasn't droped or anything. I can't find any setting to change

I have a sony cybershot dsc w730 , since a year. The problem is that over 2-3 months the LCD screen has become very dark. It is almost completely black unless I point the camera dirrectly at light. If I take a picture, the picture is exactly what the ... Canon PowerShot A70 Digital Camera

D2xs has no menu options, just a menu option with the wrench icon, firmware version says 7.30 and 7.31 cant reset anything on the camera need to know if the problem can b fixed

... Nikon D2Xs (Body Only) Digital Camera

My D90 sometimes has an err message and also a CHA in the the ISO mode. Also there is a green LED on the back of the camera that stays on. The only way to get all this cleared is a battery pull. When this happens it wont take a picture, you cant access the menu or anything.

CHA indicates a problem with the SD card. ERR indicates a camera malfunction. Try reformatting the card which may clear the problem or try a different card. The card may be creating the ERR message. On page 259 of the D-90 users manual, Nikon says th ... Nikon D90 Digital Camera with 18-105mm lens

Hi. I have a Canon Xsi/450D Camera. I can access the menu funtions when in the preset modes eg. landscape, sports etc. but when i rotate the dial past the Auto mode into the manual settings modes(the creative zone as canon calls them) the menu funtion will not work. I push the menu button and nothing, the remote funtions will not work either. I've tried to update the firmware, but as you have to access the menu in the manual modess to do this i cant update the firmware either(also cant do

The manual mode runs off power from a separarte capacitor. The capacitor holds a charge which is greater than the voltage of the battery for the needs of this option. When a capacitor fails nothing will operate in the manual mode. You will need to ha ... Canon EOS Rebel XSi Digital Camera

Hi, I have a panasonic Lumix, DMC-FS5 digital camera. When I turn the camera on and it's on 'photograph' mode, a message keeps appearing after a couple of seconds saying: "please turn camera off and then on again". I get the same message everytime and am unable to take any photos or even access the menu options. There are no problems when the mode is set to 'playback' mode. The images are still there and I can scroll through, as well as access the menu.

Hi,I had this same problem. I have just pulled the lense (not with any major strength) when it was fully extended. This seems to have solved it for me!! ... Panasonic Lumix DMC-FS5 Digital Camera

Blank Screen I am having the same exact problem that is reported by Vinayak where I have opened my camera after a while and I get a blank screen. I can go the Menu and all the menu show up wihtout a problem. I just cannot take any pictures. I can see pictures that have been previously taken by this camera. Can someone please make any suggestions Regards, Sonny Bajaj

This is a CCD problem that Nikon is correcting at no charge - go here to find more details: http://www.imaging-resource.com/badccds.html\015\012\015\012Click on the Nikon link for a form to fill out. ... Nikon Coolpix 5700 Digital Camera

My DSC-T700 seems to have lost its internal software (this may not be the problem, but as a novice, this is best I can describe the status of my camera). The camera only shows an image when the slider is opened. But can't do anything with the camera. The menu system has vanished completely. The buttons as well as the zoom does not work. I was anti virus scanning the camera, then deleted all the files in within its drive, via PC. The problem seemed to start from then. I've tried the basics

Yes, using the PC to delete the files and running a virus scan (totally not necessary) has caused your problem. Since the menu doesn't appear, you can try a manual reset but I doubt it will help at this point. Here's how: remove the card and battery ... Sony Cyber-shot DSC-T700 Digital Camera

D40X: can't access menu with card in camera

Try "Custom Settings Menu" -> "06 No memory card?".Does it have any influence?Tom ... Nikon D40x Digital Camera

Hi, I recently purchased a D2Xs floor model or demo unit form a liquidation company here is Kansas City. The problem is that I have no menu options and the only thing that comes up when I access the menu on the camera is a small setup menu with about 6-7 options, none of which include a reset or any additional features. This renders the camera practically useless as most of my dials will not work because they need to be directed by the firmware. How can I reinstall the original version 1.0 firmw

... Nikon D2Xs (Body Only) Digital Camera

Hello. So this is my problem: I have the CD's and the cable from my panasonic dmc fz18. I instaled the drivers from the cd but when I connect my camera to the pc nothing happens. On my computer I don't get the warning that I insert a USB cable and on my camera nothing happens. it like there is no cable in it. i can take pictures, record..do anything with the cable connected to my computer. It used to work.. Is there an option in the camera menu? maybe i did something in the menu..or mayb

Please downloaded it here :\012www2.panasonic.com/consumer-electronics/support\012\012 ... Panasonic Lumix DMC-FZ18K Digital Camera

Display problem Hello, I've had my SD1000 for less than 3 months. Sometimes the display goes black, I can still access the menu options and if I slide the button to review images they will display on the LCD panel. But even if I've just powered it on, the LCD is black, if I take a picture anyway, the picture is also black. Sometimes if I turn on the camera and turn it off again a few times it starts displaying correctly again. Is there a hardware problem with my camera or is this something I sho

I had the same problem with my SD1000 and was so frustrated with reading all of the troubleshooting "solutions".... After a couple of days researching, I finally stumbled upon a site that actually suggested turning the unit off and "slapping" it a c ... Canon PowerShot SD1000 Digital Camera

Hi good day the problem with my toshiba camera is that you have to plug it with the charger then thats the time you can take picture,or view the pics after that if i unplug it along with the charger i cant turn it on,the power automatically is lost when i unplug it,i cant turn it on anymore once the charger is remove.please help me,is the battery the problem?

It does sound like the battery is the problem. You don't say what model your camera is, so I can't find out what kind of battery it has or how it charges. Rechargeable batteries don't last forever. They are usually rated for several hundr ... Toshiba Digital Cameras

My samsung S750 camera is just showing a white blank screen. Cant see anything. It can still take pictures, but cant see them through the camera, only is you put the SD card in computer. I can hear the soung going to menu. But there is nothing.. Please HELP !!! Yolandie

... Samsung Digital Cameras

My A460 camera has a diffrent kind of problem which is while clicking a photo in a daylight or well lighted area the picture contains very light where i cant see anything and when i make veido it works fien can please some one tell me thatr whats wrong with my camera ?? is lance fine or that has got some serious problem

First make sure that you're in full auto mode and not in manual or any of the special scene modes. Check your rotating mode dial that its set to the first red camera by the blue arrow.\015\012\015\012If you already are and were in auto, ... Canon PowerShot A460 Digital Camera

Hi, i was wondering if you know how to restore my sony cyber-shot DSC-t77 to its factory settings? My camera use to take really good pictures but now the pictures are all blurr you cant tell what they are...and my camera is touch screen and the alignment is off soo i cant get into the menu to try and fix it..is there anything i can do?

It's a lens problem - the lens sometimes gets debris in between and does not extend out enough to take clear pictures or the lens is crooked from impact or damage. As for the touch screen and not being able to read the menu on your screen, that's al ... Sony Cyber-shot DSC-T77 Digital Camera

Optio E10 When I turn my camera on I get an error message that says "memory card error", I purchased a new memory card but still get the same error message...any suggestions? I have the exact same problem with my Pentax Optio S7. I turn on the camera and it displays the message Memory Card Error. I have tried several new cards and get the same message. There is an option on the menu to format a card, but you can't access the menu if you have the card installed. It takes great pictures without t

HelloOK, if the memory card itself is locked, you might \012sometimes get this error code. All you need to do is to take out the \012memory card and switch the lever on the left side to the unlock. ... Pentax Optio S7 Digital Camera

Black screen This is the fourth time I have asked this question and I still don't have an answer. My camera turns on but it will not do anything else and the screen is black I've never dropped it or anything I just turned it on one day and that's what happened now can someone please help or is this a problem that cannot be solved and I should just get a new camera?

You need to change the lcd screen but this is quite costly for a repair, better yet change the camera ... Polaroid i737 Digital Camera

Canon Powershot A75 problems ________________________________________ I have a Canon powershot A75 Digital camera its about a 11 months old and has a few problems now. 1. zoom doesn't work any more 2. any buttons like "menu" "func" "up/down/left/right" don't work anymore 3. unable to view pictures I've taken except the last one 4.Orange AF light on the front of the camera keeps blinking. I am able to still take pictures and download them to my computer but thats all. Has anyone else

Having read on a few sites about loose ribbon wires causing problems and having this same problem.\015\012I decide to take the camera apart. Taking all the screws out and fidling with the "wires" connecting the zoom control and the photo type selecto ... Canon PowerShot A75 Digital Camera

Focus Trouble All of the sudden, my camera won't focus. The menu works, & I can view old pictures clearly, but I can't take a picture w/o it being blurry. The lens does extend in & out, & the camera sometimes powers off. (Not always.) My husband swears up & down that he didn't drop, or do, anything to the camera. I didn't either. This camera is only 4 mos. old. What is wrong with my it? Lens problem? Could this be covered under warranty?

Same here - 1 month old... camera never dropped at any point. thankfully there's a warranty!! just about to send it back to olympus for repair but after repair if it does it again i'm going to return it as not fit for purpose - i really don't fancy t ... Olympus FE-280 Digital Camera

Card locked when i turn the camera on with a memory card in it, it says card locked and i can't take pictures, delete them or anything. i know its not the camera card because i take it out and make sure its unlocked. when i don't have the camera card inside the camera it works perfectly... and ever since i lost my usb cord i cant put my pics on the computer...please solve my problem

Are you able to format the card in the camera. Also the USB cable you probably need is the same as most other mini USB devices. ... Samsung Digimax S73 Digital Camera

Flash rebound I am new to digital cameras. So i took a long time searching before deciding on yhe tz3.The camera works great in daylight situations but with night snaps taking shots against glass or neon etc the flash is on the photograph also neon is exagerated spoiling the snaps.I have tried everything on the menu but cant seem to rectify. I am new to this but just back from holiday with mates all with different makes of cameras and not one had same problem. Any ideas. jack.

A camera flash against a glass, or any reflective surface, will bounce the flash light right back at you. Turn off flash when shooting through glass. Note flash is only for shots less than 12 ft distance. It take it you are shooting scenery shots thr ... Panasonic Lumix DMC-TZ3 Digital Camera

I have one SNC-RZ25P Sony camera . I install the go1984 camera software . I add my camera to this software but ia cant see anything . On the log tab i have this msg . <> Please help me to solve this problem

... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4628 seconds