Having problems with your Kodak EasyShare C330 Digital Camera ?

Giving me 'lacks ID separator' and device connection cannot be found. Have re-installed the software -


Answers :

Try NOT connecting your camera to your computer.


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.


Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa.
Repair Help & Product Troubleshooting for Kodak EasyShare C330 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Giving me 'lacks ID separator' and device connection cannot be found. Have re-installed the software -


Try NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or c ... Kodak EasyShare C330 Digital Camera

Camera fufifilmF40fd connects to computer but computer cannot access pictures -Device manager Code 19 says cannot start this hardware device because its configuration information in the registry is incomplete or damaged, could not load driver software. It says when i check the driver that the best software driver is installed and up to date. problem code 00000013 date 21.6.06, 6.0.6001.18000. Any solutions?


Two things need to be done :\015\012\015\0121. Uninstall all the drivers of your camera installed by windows, from the device manager. After doing that use a registry defragmenting software to rectify the errors in the registry. ... Digital Cameras

PROBLEM CONNECTING A jvc gz-mg334hek hard disc camcorder to my computer, Software is installed ok. When camcorder is connected and powered up my compter says 'NEW HARDWARE DECTECTED'and starts the 'FOUND NEW HARWARE WIZZARD' after a brief attempt at connection the wizzard stops and says 'There was a problem installing your hardware , The Data is invalid' This means i cannot transfer any data from the camcorder to the pc or vice versa - Is there a solution to this.!!!


Hi sixthpistolI would try deinstall the software for the camera, then reinstall it, reboot then try the camcorder again. Be sure to install the software BEFORE plugging in the gear. I am more than happy to answer any other question ... JVC Digital Cameras

When connecting the Kodak C913 to the computer, the USB hub will not receive information from the Kodak. The driver is failing for some reason, giving the error message (during reinstallation of the drive): An error occured during the installtion of the device. A service installation section in this INF is invalid. I have downloaded the software off the site and installed off my disc, however nothing seems to work.


Possible solutions:\015\012Remember you need to turn the camera on when transferring.\015\012Try a different USB outlet\015\012Try a different cable\015\012Try a different computer.\015\012\015\012If all fails plea ... Kodak EasyShare C913 Digital Camera

Digital Trail Camera Model#119223C. Trying to view photos on my PC per instructions on page 12 of Manual. Have H-P Compaq Presario PC with Windows XP Home Edtion. PC recpgnizes that New Hardware Device is found but cannot locate any driver/s for the device. Camera did not come with a CD with software to install. PC does NOT display a new disk symbol under "My Computer". Where can I download necessary software/driver? Thanx!


Hi,\015\012\015\012The drivers required to connect digital cameras through the USB port are included in the Windows XP operating system. So, no drivers are necessary to download or view the images on the PC.\015\012\015\012Als ... Digital Cameras

WHEN I CONNECT MY CAMERA VIA THE USB CABLE AND SELECT DOWNLOAD PICTURES TO PC NOTHING HAPPENS.WHEN I GO INTO MY PROGRAM FILES IT CANNOT BE FOUND, I HAVE TRIED TO REINSTALL USING THE SOFTWARE CD SUPPLIED WITH MY CAMERA BUT CANT GET IT TO RUN, THE CD IS VERSION KA2.1 h owners manual pdf format, Adobe Reader Installer' CAN YOU PLEASE HELP SOLVE THIS PROBLEM ------THANK YOU


This type of problem is probably software related, but it could be some sort of incompatibility issue.\015\012What you can try to do to get the pictures downloaded, is to get a card reader, hook it up to your usb port, and access them through t ... FUJIFILM FinePix S1600 Digital Camera

I have Canon Rebel XTI. When I connected it to a USB port, the AutoPlay in Windows Vista came up and asked what I wanted to do with the pictures. I always selected copy to a specific folder. Now, however, Vista tries to load a the drivers for the Canon and cannot find them. It does not look at the camera as a simple storage device now, but this is what I want. I went through various fixes, including and installing the latest drivers and software, but to no avail. Some sites suggested


Have you tried to open the files thru windows explorer? Try to locate the drive letter associated with the Rebel XTI. Open that drive by double clicking it and it will show you the file contents. Browse thru the folders inside until you find the p ... Digital Cameras

Hi, I have an Ixus 870 but my computer cannot detect the device when I connect it with the wire provided. Can you advise what can be wrong? At first I didn't install zoombrowser (which I thought I did not need), but now even after installing, the device cannot be detected. THanks!


First thing will be to download or update the driver. You can get it for free on manufacture's website and sometimes other sites as well. Then after it is dowloaded, then double-click on the file so it installs into your registry. After it installs i ... Canon Digital Cameras

Can't transfer or view images from camera to computer. All USB ports are working on computer. Double checked connections. Get following messages: 1. installing device driver software 2.searching pre-configured driver folders 3. software for this device has been successfully installed...pending.


Consider NOT connecting the camera to the computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to th ... Sony Digital Cameras

Hi there. I am having a problem connecting my Canon Powershot A630 camera to my computer. My computer is running Windows XP and I have installed the software that came with the camera. When I connect the camera to the computer via USB cable the computer says "Found new hardware - Canon Digital Camera" and then the "Welcome to the Found New Hardware Wizard" opens up. It says Windows will search for current and updated software and then tells me to insert the Compact Disk labeled Windows XP Profes


Hi there,If\015\012 you want to download the pictures on your camera, try plugging it into \015\012the usb port of your computer using the usb cable. Then turn on the \015\012camera and make sure it is set to REVIEW MODE. Usually, ... Canon PowerShot A630 Digital Camera

Ive reinstalled the software for the GearHead 535i and extracted it from the zip folder however, when I go to the control panel and select add new hardware it prompts me to either search for software or manually select, I select the driver I installed from my files and click search/install but the installation wizard still says it cannot install my cam because no software was found. I need this to run, what do I do? whats wrong with it?


What I suspect is happening is this...the orginal Software was installed in a different folder/target than the zip files installed it. Control Panel may be looking in another location, even though you selected the driver. What I'm wondering is ... Digital Cameras

When I connect the Samsung s860 digital camera to my Macbook Pro the computer does not connect/recognize it. I tried opening the Window's drive portion of my macbook and still no recognition of the camera. I also opened I photo to try to import-- can't find the camera. I installed the Samsung software on the Windows side of my mac, opened the software, but still the software cannot find the camera. It acts as though the camera is not even connecting to the computer... but the cable is good and t


Do what the pros do...use a card reader to download to a folder you create on your desktop. ... Samsung S860 Digital Camera

My new Insignia Digital Photo Keychain won't load. I bought 2 of them, and both of them when I connect them they say ''connecting'' on the blue screen, but they never come up on my computer. My device driver says there is an error and it cannot upload the device driver. I don't know what to do to bring up this software if my computer won't recognize it when I connect it.


... Digital Cameras

Hello, I connected my DCR-HC54 (minidv) to computer using USB cable (come with camcorder). latest PMB is installed on windows 7 64-bit home premium. It gives following message: Cannot find the Handycam (Tape). Check the i.LINK connection to the Handycam. What to do? If USB cable is not used, why sony gives it with camcorder?


This type of camera usually downloads better with a Firewire (DV) connection. Sony call this "i.Link". Some mini-DV cameras only use the USB connection (if they have one) for stills and can only download video by Firewire. This is because you have to ... Digital Cameras

I have a canon powershot SD800 IS. When I connect to my computer (windows vista), the icon is not coming up for my to press to download my pictures. I went to the device manager and saw that there is a yellow exclamation mark beside my camera. I tried updating the driver software and it tells me that my device is already uptodate. However, the computer still cannot read the camera and I cannot download my pictures. Please help.


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Canon PowerShot SD800 IS / IXUS 850 IS Digital Camera

My PC is not recognizing my camera, so i cannot download my pictures. It used to work fine for 2 years. In the Device Manager it gives me the following message: Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19). My software is up to date. Help!?!


Windows updates has changed the registry and now your camera is no longer recognized. No problem....just get a card reader and use it instead of your camera for downloads. ... Canon PowerShot A570 IS Digital Camera

Nikon transfer software was successfully installed. however windows vista is asking to install device driver software when i connected nicon s4000 to a computer. what's the problem?


Having gone over five months without a response, I assume my suggestion to use a card reader eliminated the need for a driver. ... Nikon Coolpix S4000 Digital Camera

I have a C-3030ZOOM. Had a HD failure and re-instaled CM 2.01 and updated to V2.3 that is running MS OS XP Pro. The computer is unable to recognize camera. When I connect the camer to PC via USB - I do not hear the "Bong" sound when new device is added. Going to Contol Panel to add devise, it says that drivers for device not installed (Code 28). Hardware update wizard cannot locate drivers. Loaded W2000 drivers. Rebooted PC. Started Olympus Master V2.3 and went to file to upload images from c


Presumably you downloaded this, extracted files and right clicked inf file and clicked install?\012Did you then reboot and try to connect the camera? Connect then switch camera on? ... Olympus Camedia C-3030 Zoom Digital Camera

Despite installing software on computer.when i connect the camera with the usb cable it comes up as unknown device. have tried reinstalling driver but no joy. have installed camera previously on another computer with no problems to start with then started to not recognise device on first computer. any ideas?


The pros never use the camera....they always use a separate card reader. You should too. ... Samsung Digimax V800 Digital Camera

Plugging in the USB connection between Panasonic Lumix FZ20 and Mac G4 results in immediate computer shutdown. Camera is on and in playback. Battery fully charged. OSX 10.4.11 is installed. Manual insists driver should show up on desktop using OSX after cord plugged in, with no additional software installation. None of the software on CD provided with the camera is OSX. No updated drivers (supposedly not needed) found.


The usb socket of the camera,must be chaqued,if needs replace it....conection failure. ... Panasonic Lumix DMC-FZ20 Digital Camera

USB connection The computer cannot access the Memory Stick® media in the camera when connected with the USB cable. I connect the camera to my computer using the USB, then after 10 seconds its says there is no device connected to the computer, and then it gives me option to cancel, retry, or continue but it usually connects automatically itself again. The only problem is that I can't do anything with pictures can't copy, delete, or view them. I'ce already tried to delete and reinstall the driver.


I would invest in a memory card reader. You can pick one up for under $20. Using a card reader allows you to avoid having to deal with drivers and such that may or may not be loaded on your PC. A card reader should work just fine for ya. Good luck ... Sony Cyber-shot DSC-W50 Digital Camera

Usb issues I tried to upload my images from my A540 and i get a bubble that comes up on my desktop this device can perform faster this usb device can perform faster if you connect it to a Hi-speed usb 2.0 port. when clicked on brings up a window that says the unknown usb device is a hi-speed usb device and will function at reduced speed when plugged into a non-hi-speed port It tells me that there are no HI-SPEED USB host controllers installed on this computer so it gives me a recommendation the


Dear customer,\015\012\015\012 Though you get these msg's which you have mentioned, you can ignore them, and try manualy installing the driver software for the camera, somehow.\015\012\015\012Thankyou ... Canon PowerShot A540 Digital Camera

Camera Help! I've had the JVC dual mode GC-A33 camera since it's been out which was awhile ago. My problem is this: I've gotten a new computer since then and I've had pictures on this camera for a few years now. I recently found this old thing after moving. I downloaded the software. I connected the camera via USB connection. I hit the tranfer button and it gives me a little something that says: Connection failed. Please check that 1) The camera is on, and set to PC mode 2) The USB cable is conn


1. Remove the software- Windows does not need it. 2. Check the batteries are fresh in the camera. 3. Try another lead.4. if the Memory card is removable- try it in a card reader.---------------------------------------- ... Praktica DCZ3.2S Digital Camera

I cannot connect my camera to my computer. Software is installed through CD but as soon i connect camera through USB my pc automaticaaly re starts. My camera was off while connection and when i on it, my pc restarts.


... Digital Cameras

Camera Help! I've had the JVC dual mode GC-A33 camera since it's been out which was awhile ago. My problem is this: I've gotten a new computer since then and I've had pictures on this camera for a few years now. I recently found this old thing after moving. I downloaded the software. I connected the camera via USB connection. I hit the tranfer button and it gives me a little something that says: Connection failed. Please check that 1) The camera is on, and set to PC mode 2) The USB cable is conn


When it's plugged in, are you remembering to press the little (M) button to switch it to PC mode? If so, you might need to install the camera device. Go into your Control Panel and follow the steps under the Scanners and Cameras tab.\015\012 ... JVC GC-A33 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1499 seconds