Having problems with your Kodak EasyShare C330 Digital Camera ?

Tmobile mda device


\015 I have a t mobile Mda device. the screen won't boot into the operating system. It will only boot to the screen that says that you need to tap the cross mark to setup the screen. thats as far as it will go.\015\012\015\012I have downloaded the lastest rom upddate and tried to flash the unit two times. I will not allow the unit to flash. the computer says that the flashing has occured but the unit still has the old software.\015\012\015\012I have done the soft reset and the hard reset and it still comes up with the old rom software.\015

Answers :

Ask the manufacturer or service provider for another software CD to use on your set. Make sure to have your device available for any codes they might need off of it for security purposes...\015\012\015\012It sounds like it might be either a computer issues, or a software issue...
Repair Help & Product Troubleshooting for Kodak EasyShare C330 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Tmobile mda device


Ask the manufacturer or service provider for another software CD to use on your set. Make sure to have your device available for any codes they might need off of it for security purposes...\015\012\015\012It sounds like it might be either a computer ... Kodak EasyShare C330 Digital Camera

USB Error My computer will not recognize my usb device that came with my camera. I also tried with another usb device from a different camera (same model) and it still did not work. My camera has the message USB error and my computer generates the message: 'USB device not recognized. One of the USB devices has malfunctioned and Windows does not recognize it'. I received the same message with both USB cables. I thought that I may need to install the drivers for my camera, but my computer does no


Are you turning the camera on after you plug it in to your computer? You should do that with all your USB devices. Let me know if that helps. Feel free to rate my answer.\015\012\015\012Rob ... Polaroid i735 Digital Camera

Kodak Easy Share camera - I'm using ScanDisk as a device to plug my memory card into and transfer pictures. I somehow got it to work once, but Kodak Easy Share usually tells me "no device detected". My control panel tells me the device is there and working fine. I tricked it once by reinstalling and Easy Share software actually allowed me to download my pictures (last night). Today it is saying no device detected again, and nothing seems to work.


I bought a 4gb scandisk sdhc card and my camera wants to format the disk but it won't ... Digital Cameras

I wanted to download photos to PC; I must install USB1.1 Device in order to download our pictures. My Vista Computer will not install USB1.1 Device;we received the following message: "Please consult with your device manufacturer for assistance getting this device installed. Richard and Diana Peterson email address: [email protected] Thank you


What make and model of camera do you have? ... Digital Cameras

Usb issues I tried to upload my images from my A540 and i get a bubble that comes up on my desktop this device can perform faster this usb device can perform faster if you connect it to a Hi-speed usb 2.0 port. when clicked on brings up a window that says the unknown usb device is a hi-speed usb device and will function at reduced speed when plugged into a non-hi-speed port It tells me that there are no HI-SPEED USB host controllers installed on this computer so it gives me a recommendation the


Dear customer,\015\012\015\012 Though you get these msg's which you have mentioned, you can ignore them, and try manualy installing the driver software for the camera, somehow.\015\012\015\012Thankyou ... Canon PowerShot A540 Digital Camera

When i connect my philips SA3025/97 gogear device into pc, it is charging but the device is not listed in my computer or the device is not detected by pc. i am using vista operating system. kindly give me a solution.


Why don't you upload your pictures using the memory card instead of plugging in the camera? ... Philips Digital Cameras

Having problems downloading pictures from the camera and when I go into device manager and select - I get below message: I have clicked on the "check for solutions" button but get no response from Microsoft. Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19) Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.


Please get the driver here :\012www.driverskit.com/Camera/Canon.html\012\012 ... Canon Powershot SX110 IS Digital Camera 9.0MP

My Canon Pwershot A590 Is is not recognized by the computer and in the device manager window it says "This device cannot start. (Code 10) Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available." what can i do?


Try NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or c ... Canon PowerShot A590 IS Digital Camera

I need help. I've used my memory card many times with no problems. Now I put it in my laptop and absolutely nothing happens. It shows under "Devices and Removable Storage" but nothing happens. Under its "Properties" it says "the device is working properly". The AutoPlay is set "Use AutoPlay for all media and devices" I've even tried-- •Follow these steps: 1.Click the Start button , click All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator.


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster t ... HP Photosmart M425 Digital Camera

My Youcam says Cannot connect to this Video device(USB Camera). Please select another capture device via Setting or close any application that may be using this video device and restart YouCam please help me out .. i dont know what to do


I've got the same problem...i'm using build in usb camera on HP compaq labtop and the operating system is windows vista..please guys any help?? ... Digital Cameras

My camera worked before by uploading pics onto the comp. Now it doesn't let me at all. I tried to upload tonight and first noticed the problem. So I restarted and got back on tried it again it worked but only half of the way then it said unable to read device (I already tried to troubleshoot the device in my comp nothing came back wrong). I then restarted again and this time it didn't even try to bring up the pics it just came up with a screen that said Unable to read device. I deleted the softw


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Kodak EasyShare V1073 Digital Camera

Transferring pictures I have the Kodak easyshare C875, I plugged the usb cable into the camera and into the computer and when the device manager tries to install it, its says that it failed and to consult with my device manufacture for assistance getting this device installed.


I have the same problem, that it's not recognized. I am looking into seeing if it's the new service pack from windows. Or the crappy usb cord, mine is too tight. ... Kodak EasyShare C875 Digital Camera

I?m having problems with the above camera being read by the PC. It works perfect on other PCs when connected, but the PC in question is not picking up the device, not even as an unknown device in device manager. The PC in question is windows XP, I?ve tried all ports on the PC also. Wondering do you know a possible solution? Thank you for your time.


Use a card reader instead of the camera. ... Olympus Stylus 800 / ? 800 Digital Camera

I cant load my olmpus 300 on to pc,loaded camedia on ok but wont pick up my camera,tried to load it using devices butsays not in right file.checked usb devices,tried to add device but not having it


Consider NOT using the USB connection.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or ... Olympus Camedia Stylus 300 Digital Camera

I was having trouble installing the drivers for my creative notebook camera(its a VF0250) and i downloaded the latest versions straight from the website. when i would plug it in it said "device not recognized" and would search for the drivers but never found them. until i manually had to find them. i went on device manager->right clicked properties then went to the driver tab and clicked update driver-> clicked imaging devices and found the creative webcam driver there. now atleast the webcam re


You probably installed the wrong driver by doing that ..and what you need to do is go to the support site ..and download and install the correct one ...the camera need to be identified and to say that the device is installed and ready to use in order ... Digital Cameras

Uploading videos I am not able to transfer directly the videos from the device using the program ShowBiz. When I click on "transfer from device" an error message appears. What should I do? Thanks!


You have to have the video taken, and to do this the easiest way, (how I do it) I open the folder for the camera. \015\012(My computer then the place where you pluged the camera in) then I go to the videos folder while in the camera folder, and ... Jazz DV-179 Digital Camera

I have no installation disk. I have tried to get to my photo's through a storage device and it said no storage device connected, camera connected with an usb cable.


Buy an inexpensive card reader to download your pictures to a folder you create on your desktop. ... Olympus Camedia C-4000 Zoom Digital Camera

I have no photos or recordings on my device and have checked both via my computer and the device itself and it shows nothing on it..yet it keeps telling me the memory is full and wont take any new pictures...what do i do?..also i cleared the memory via the OS screen..help??


... Gateway Pocket DV-S20 Digital Camera

Pentax problems... Hey there. I'm having problems with my pentax camera. The camera actually works great, but, I can't sync it up with my computer. The software that came with it is not working with my pc. When I hook up the usb cable to connect the two, it never recognizes the device. I have a dell inspiron that's only about 6 months old. It has windows xp on it. I've never had problems installing a device before. I tried to add the hardware manually, over and over again with no luck. I heard s


Load any software first before installing hardware ... Pentax Optio 60 Digital Camera

Camera fufifilmF40fd connects to computer but computer cannot access pictures -Device manager Code 19 says cannot start this hardware device because its configuration information in the registry is incomplete or damaged, could not load driver software. It says when i check the driver that the best software driver is installed and up to date. problem code 00000013 date 21.6.06, 6.0.6001.18000. Any solutions?


Two things need to be done :\015\012\015\0121. Uninstall all the drivers of your camera installed by windows, from the device manager. After doing that use a registry defragmenting software to rectify the errors in the registry. ... Digital Cameras

When I hook up my polaroid camera i633 to my pc it won't automatically download my pictures from my camera like it use too. It ask me to Please consult with your device manufacturer for assistance getting this device installed. 6MP-9FW. Can you please assist?


I have a Polaroid i633 camera. All of a sudden yesterday it decides to have a blank LCD viewfinder, I try taking a picture anyway, & discover it's not just the viewfinder. I get blank pictures The LCD can still display the pictures I had already ... Polaroid i633 Digital Camera

My dell 531s desk top doesn't seem to "see" my vivitar 3915 camera. it issues the tones when the camera is plugged into the usb port, just doesn't add it to the list of usb devices it sees. my work system(s), (3) that run windows xp have no problem seeing the camera as a usb mass storage device. i have plugged the camera into all available usb ports on the 531s and have the same results. the 531s doesn't have a problem with any "jump", "thumb" type usb drives that i may plug in. any ideas gang?


Use a card reader instead. ... Vivitar ViviCam 3915 Digital Camera

I connect my Fujifilm s3500 to my computer through the USB port to download pictures and it says that device has malfunctioned and windows does not recognized it. I connected it up last week and I had no problems. Can you suggest anything? I have ensured that the device is enabled.


Hello bcpearce,It could be that your driver is corrupted.First download the latest driver for your camera from HEREDONT IN ... Digital Cameras

PC Connection My camera came with ACDSee for Pentax for viewing images etc. When I initially installed it worked great, as soon as the camera was linked to my laptop (Toshiba Satellite Pro running XP), ACDSee device detector would launch automatically, click the steps and photos would download- easy. Last month when my camera was connected, the device detector didn't launch and I had to through my computer, select the removable disk and acquire images that way. Tonight I had the same trouble but


I think it is bad connection from the usb cable to the camera try to move the connector in the camera( bending) ... Pentax Optio M20 Digital Camera

Black screen I get a black screen when the usb is plugged into the port, the camera light is still on but nothing is on the screen and nothing uploads to the cpu. I just installed a new 2-port usb 2.0 PCI Card because it wasn't responding before. The previous message i had was when clicked on brings up a window that says the unknown usb device is a hi-speed usb device and will function at reduced speed when plugged into a non-hi-speed port It tells me that there are no HI-SPEED USB host cont


To view the pictures on the computer, remove the card from the battery\015\012compartment and put it in a card reader connected to your computer. ... Canon PowerShot A540 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0334 seconds