Having problems with your Kodak EasyShare C433 Digital Camera ?

Connection problems between camera and software

\015 I am unable to get my Kodak C433 camera to connect with the Easyshare software on my computer to transfer my photos. It has worked just fine for 3 years, but now it makes the Easyshare program hang when the camera is connected. I've uninstalled and reinstalled Easyshare 2 times, but still cannot get the camera and software to run together\015

Answers :

You can blame windows updates. Use a card reader from now on to make your life easier.
Repair Help & Product Troubleshooting for Kodak EasyShare C433 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hi there. I am having a problem connecting my Canon Powershot A630 camera to my computer. My computer is running Windows XP and I have installed the software that came with the camera. When I connect the camera to the computer via USB cable the computer says "Found new hardware - Canon Digital Camera" and then the "Welcome to the Found New Hardware Wizard" opens up. It says Windows will search for current and updated software and then tells me to insert the Compact Disk labeled Windows XP Profes


Hi there,If\015\012 you want to download the pictures on your camera, try plugging it into \015\012the usb port of your computer using the usb cable. Then turn on the \015\012camera and make sure it is set to REVIEW MODE. Usually, ... Canon PowerShot A630 Digital Camera

Camera Help! I've had the JVC dual mode GC-A33 camera since it's been out which was awhile ago. My problem is this: I've gotten a new computer since then and I've had pictures on this camera for a few years now. I recently found this old thing after moving. I downloaded the software. I connected the camera via USB connection. I hit the tranfer button and it gives me a little something that says: Connection failed. Please check that 1) The camera is on, and set to PC mode 2) The USB cable is conn


When it's plugged in, are you remembering to press the little (M) button to switch it to PC mode? If so, you might need to install the camera device. Go into your Control Panel and follow the steps under the Scanners and Cameras tab.\015\012 ... JVC GC-A33 Digital Camera

Camera Help! I've had the JVC dual mode GC-A33 camera since it's been out which was awhile ago. My problem is this: I've gotten a new computer since then and I've had pictures on this camera for a few years now. I recently found this old thing after moving. I downloaded the software. I connected the camera via USB connection. I hit the tranfer button and it gives me a little something that says: Connection failed. Please check that 1) The camera is on, and set to PC mode 2) The USB cable is conn


1. Remove the software- Windows does not need it. 2. Check the batteries are fresh in the camera. 3. Try another lead.4. if the Memory card is removable- try it in a card reader.---------------------------------------- ... Praktica DCZ3.2S Digital Camera

My camera will not connect to my laptop. I have had the camera for about 9 months and not had any problems with it before! Every time I plug the usb cable into the laptop the camera say " processing - computer connecting and then connection fail. I have un-installed and re-installed the software but to no avail. It simply doesn't seem to recognise the camera anymore. I have no idea why this is happening and it simply will not work. It is very frustrating. The troubleshooting section of the manua


Most of the time, Windows update is at fault. Pros avoid this problem by using a card reader for downloading their pics.\012 ... Pentax Optio M85 Digital Camera

Connection Problem I hope I'm posting this in the right place. I recently bought a Kodak DX4900 & installed the software onto my computer. After taking some photos, I tried transferring the photos to my computer, but it appears that my computer just isn't seeing the camera. I've uninstalled the software & re-installed it, defragged my computer & run a scandisk & the problem still hasn't been fixed. I'm not particularly computer literate at the best of times, and am stuck. I have a new camera tha


I had the same problem with my DX4900. After reinstalling software, etc it finally turned out that the cable that connects the camera to the computer was bad. Kodak has specs for the DX4900 on the ... Kodak EasyShare DX4900 Zoom Digital Camera

Hi I have a Canon PowerShot 460 Digital Camera and it works great when I want to take pictures or make movies. The problem is that when I try to connect it to my computer to retrieve the pictures on the camera, my computer says that my camera isn't detected. I don't understand why that is because the camera's software works fine. I thought it was a problem with the USB cord, but it works fine with other electronic devices. The USB doesn't seem to work with the camera. I don't get whats the iss


Plug the camera up in the normal way and take a look at 'My Computer'If the PC is seeiong the camera it will indicate this by 'putting' up a new Remoceable drive Icon- If it has work at it from there.If it did nmot - Remove the Camera so ... Digital Cameras

I have a Canon A700 powershot. For some reason the camera is not automatically downloading the photos to my computer. I have reinstalled the software to the computer but when I connect the camera to the computer the blue light on the camera denoting download capability no longer comes on and the computer whilst sound prompting the connection does not appear to be recognising/connecting the camera to the computer. This is a recent problem. Is it likely to be a fault with the camera, computer


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Canon PowerShot A700 Digital Camera

My pictures won't download!! I never had this problem before, so I don't know whats going on? I plug in the usb cord, and the camera turns on and everything, but the thing will not pop up where it usually says press ok to transfer pictures. I redownloaded my software to my computer but when I try to transfer the images from my camera to my computer it says THE SOFTWARE IS UNABLE TO FIND THE OLYMPUS DIGITAL CAMERA CONNECTED TO A USB PORT ON YOUR COMPUTER! HEEEELLP!!


Some comp seem to have problems reading from the olympus cameras. if you have a card reader take the card out and put into that. if not you can get one cheap and they simple to use ... Olympus FE-340 Digital Camera

EOS Utility I purchased a Rebel Xsi, and installed the software. Upon connecting my camera to my computer, and launching the EOS Utility, the options to download the images, select images, or camera settings are shaded out. In order to transfer pictures, I have to go into "My Computer", open up the camera and copy and paste it. I have updated all of the software from Canon's website with the June 2009 updates, and the problem persists. Thanks for the help.


I got the same problem updating the EOS Utility. The version on the original SXi CD is 2.4.0.1. The upgrade is version 2.6.1. I suggest you to uninstall all the updated software. Or at least the EOS Utility. Go to the folder <C:\\Documents and Se ... Canon EOS Rebel XSi Digital Camera

Pentax problems... Hey there. I'm having problems with my pentax camera. The camera actually works great, but, I can't sync it up with my computer. The software that came with it is not working with my pc. When I hook up the usb cable to connect the two, it never recognizes the device. I have a dell inspiron that's only about 6 months old. It has windows xp on it. I've never had problems installing a device before. I tried to add the hardware manually, over and over again with no luck. I heard s


Load any software first before installing hardware ... Pentax Optio 60 Digital Camera

Hi I recently purchased Canon Powershot Sd1200 IS. I installed the Solution Disc software but when I connect the camera to my computer there is nothing that tells me I have installed new hardware - the computer makes the ringing sound when I turn camera power on and off. Only the user guides show on my computer. Before this camera I had the Canon Powershot SD1000 and was able to download my pictures with no problem. Was told at Future Shop that it might be a problem with my computer. rnEmail


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Canon PowerShot SD1200 IS / Digital IXUS 95 IS Digital Camera

Our fuji camera gets a communication problem message when we connect the usb cable to the camera and PC the correct software is on the PC I have checked the USB set up on the camera and it is fine it says searching for USB then says communication problem can anyone help please ?


Try a new cable ... Fuji FinePix A700 Digital Camera

Have a Sanyo VPC-5500 camera. I'm tying to connect it to my computer to download some pix. I've followed the instructions in the manual and then connected the cord from the computer to the camera. However, when that's done, the software which is supposed to open for downloading doesn't open. I sometimes have this problem and never can figure out why.


Download to a folder you create on your desktop. Then, open the software and click on "file" at the top and then "open"...choose that folder and it should open in your software. ... Digital Cameras

I have a Hasselblad H3D II 31Mg , i had a small Problem with the digital back , I ve connected it on my laptop & opened the FLexcolor Software and the Software asked for an Update so I pressed ''yes'' and a problem Occure on My Digital Back I lost it totaly it went Blank it showes a White Screen , The Camera Show that now that ''digital not compatible'' Thank you for any assistance .


... Hasselblad H3DII-31 Digital Camera

I have a EX-Z3 (product no. 2031914A) camera. I recently upgraded my PC which runs Microsoft Vista - previously I ran Windows Office 2000 Professional and with Picasa 2 had no problems. However, my new computer sappears not to recognise the Casio camera as an attached device...I have loaded and reloaded the software and checked and double checked connections and the USB cable. What could be the problem and is there a simple solution (for a non-technical person)?? Many thanks. Roger Neilson r.nei


Uninstall the software.reinstall the software with camera not connected to usb.this often solves the problem. ... Digital Cameras

Olympus model FE - 170. I have just installed Microsoft Vista and keep getting a message that the camera is not being recognised even though it is properly connected through a USB port. I have installed the Olympus setup disc (version 1.0) but this has not solved the problem. I had no problems when using the same camera and software through Windows XP. Can you help?


Try pluggin it in and go to control panel and search and add hard were and see if there is any files missing or invallid \015\012even try uninstall and reinstall ... Olympus Digital Cameras

Connection problems between camera and software


You can blame windows updates. Use a card reader from now on to make your life easier. ... Kodak EasyShare C433 Digital Camera

My camera was working fine . I moved the computer to another room. This is the problem when I try to transfer pictures from the camera to the computer I get an error message stating that the software is unable to find The Olympus Digital camera connected to the USB Port on your computer. Well I have tried eveything. A new USB cable, reinsatlling the program. Moving the cable to all ports on the computer. I took the camera to a friends and we insatlled the program on his computer and it did the s


Try to get a external memory card. And try that instead. It might work better than the usb. ... Olympus Digital Cameras

Problem lies between my ears :). I installed PBM software on notebook but last part od installation about connecting camera to notebook goes into a loop insisting I plug the camera in. When done and click on continue it re-asks to have the camera plugged in. Control panel of notebook sees teh memory stick but you cannot gain access to it. Q: How do I download teh ;picture sto be viewed and copied?


Hi\012you might get a external memory card reader and plug memory stick to reader. then you can see a new drive in my computer. rest of work you can handle.\012Thanks and best regard! ... Sony Cyber-Shot DSC-W530 Digital Camera

Despite installing software on computer.when i connect the camera with the usb cable it comes up as unknown device. have tried reinstalling driver but no joy. have installed camera previously on another computer with no problems to start with then started to not recognise device on first computer. any ideas?


The pros never use the camera....they always use a separate card reader. You should too. ... Samsung Digimax V800 Digital Camera

WHEN I CONNECT MY CAMERA VIA THE USB CABLE AND SELECT DOWNLOAD PICTURES TO PC NOTHING HAPPENS.WHEN I GO INTO MY PROGRAM FILES IT CANNOT BE FOUND, I HAVE TRIED TO REINSTALL USING THE SOFTWARE CD SUPPLIED WITH MY CAMERA BUT CANT GET IT TO RUN, THE CD IS VERSION KA2.1 h owners manual pdf format, Adobe Reader Installer' CAN YOU PLEASE HELP SOLVE THIS PROBLEM ------THANK YOU


This type of problem is probably software related, but it could be some sort of incompatibility issue.\015\012What you can try to do to get the pictures downloaded, is to get a card reader, hook it up to your usb port, and access them through t ... FUJIFILM FinePix S1600 Digital Camera

Camera fufifilmF40fd connects to computer but computer cannot access pictures -Device manager Code 19 says cannot start this hardware device because its configuration information in the registry is incomplete or damaged, could not load driver software. It says when i check the driver that the best software driver is installed and up to date. problem code 00000013 date 21.6.06, 6.0.6001.18000. Any solutions?


Two things need to be done :\015\012\015\0121. Uninstall all the drivers of your camera installed by windows, from the device manager. After doing that use a registry defragmenting software to rectify the errors in the registry. ... Digital Cameras

I have a Pelco DX4000 DVR. I am using this DVR with a surveillance camera. I want to be able to link this DVR with my laptop. To do this process is fairly simple. I have another DVR that I used the same way. I downloaded the software and was able to link it to my laptop with no problem. Now, when I tried to do the same process with this Pelco DVR, it will not connect. There at times an error box displays saying "Publisher Unknown" and won't open. Then other times it comes up the camera numbers &


... Digital Cameras

Hi. I have the Fiju S2500 all the data downloaded ok but when I connect the camera i get a message saying IO Error Occur Process Aborted I uninstalled the software and applyed it again I get the same problem. Please help before I send this camera back.


I'm wondering if this could be related to a Windows problem, or driver problem. A few Fuji owners have had this problem, as the following blog shows:\015\012 ... Fuji FinePix S5000 Digital Camera

When I connect the Samsung s860 digital camera to my Macbook Pro the computer does not connect/recognize it. I tried opening the Window's drive portion of my macbook and still no recognition of the camera. I also opened I photo to try to import-- can't find the camera. I installed the Samsung software on the Windows side of my mac, opened the software, but still the software cannot find the camera. It acts as though the camera is not even connecting to the computer... but the cable is good and t


Do what the pros do...use a card reader to download to a folder you create on your desktop. ... Samsung S860 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4774 seconds