Having problems with your Kodak EasyShare C613 Digital Camera ?

Get lens fault 20e ,1,0,0 on c613 lens will not retract

Answers :

Fixing a Lens Error on a Digital Camera
\015\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\015\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\015\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\015\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\015\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\015\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\015\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\015\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\015\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\015\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\015\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\015\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\015\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Kodak EasyShare C613 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Get lens fault 20e ,1,0,0 on c613 lens will not retract

Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Kodak EasyShare C613 Digital Camera

Lens will not retract lens error 20e,1,0,0 - Kodak EasyShare C613 Digital Camera

Put in fresh batteries in your camera and try to power on. If this didn't work, do this little trick:1. Hold the camera on your right hand with the lens facing the ground.2. As you press the power on button, tap or hit the cam ... Kodak EasyShare C613 Digital Camera

Hi I am getting a Lens error message 20e,1,0,0 on our Pentax Optio E30. The lens will not retract.

Hi,Unfortunately, this is a common problem on this model. Yet, no resolution other than getting it repaired.There are a number of things you can try:1. Ensure batteries are fully charged2. Look ca ... Pentax Optio E30 Digital Camera

Lens Problem I got a new Kodak EasyShare C613. The lens just won't go in and it shows lens errors 10e,1,0,0 and 20e,1,0,0.There was no mechanical shock imparted whatsoever.I was trying a SanDisk SD card. The lens opened and it just won't go in. Please help. I got the camera shipped from the U.S so even warranty won't work.

Okay, Kodak is a load of **** if they won't allow warranty on an item that doesn't retract. And I got an SanDisk SD Card like you, and on most of my pictures it says, "FILE FORMAT UNRECOGNIZABLE." You should Email Kodak and talk to them about that wa ... Kodak EasyShare C613 Digital Camera

I have kodak easyshare c613 camera wont work, it showing a code lens error 111,0,0,0 and lens error 221,0,0,0. what can i do to get it to work?

Maybe change a new lens will be ok ... Kodak EasyShare M1033 Digital Camera

When I turn on my camera I am getting error like this lens error:20e,1,0,0 after that off but that optical Aspheric Lens of the camera remain outward only.So plz help out for this problem.

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Kodak Easyshare C813 Digital Camera

How to fix lens error: 20e,1,0,0 from kodak c613

This is probably THE most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Nikon COOLPIX L4 Digital Camera

Io get a lens error221,0,0,0can it be fix? - Kodak EasyShare C613 Digital Camera

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Kodak EasyShare C613 Digital Camera

Kodak EasyShare C643 Digital Camera lens error 20e,1,0,0

Try the procedures in this tip. ... Kodak EasyShare C643 Digital Camera

Kodak EasyShare C643 Digital Camera lens error 20e,1,0,0

Try the procedures in this tip. ... Kodak EasyShare C643 Digital Camera

My Fuji F50 has developed a fault whereby it's stuck with the message 'Focus Error' on the screen. The lens is unable to retract. I get beeps and an unfamiliar electronic buzz when I turn it on or off. I've tried taking the battery out and have been through the controls to no avail.

Works on any camera like this OK you are probably going to think I am loony giving you this advise But No I am completely sane!Get a can of compressed air OR acces to a compressor at your local garage Get them to fit the triggered a ... Fuji Finepix F50FD Digital Camera

Lens error I have a Canon Powershoot SD1000 and it was working fine until one day the lens stopped retracting. Now it doesn't retract and I get a Lens Error, Restart Camera message. I looked at other websites to get help and tried some of the ways they suggest to fix it. Not sure if its working, because it still gives the same message and makes a noise sounding like its trying to retract then gives me the Canon welcome picture. I've only had this for a little over a year and would like it to be

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Canon IXUS V2 Digital Camera

Camera was on, working fine. When powering off, telescoping lens did not retract so lens remained extended just a bit with lens cover open. Waited a few minutes, turned it back on and I get the "access" display message then the beeps and (turn power off and back on) message. While off, I have removed the battery, replacing it with a fully charged spare and it still does this. The lens tries to telescope a little bit and retracts a touch, but I can't get the camera out of this mode. Can it be res

Your problem may be due to corrosion on the battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything else: remove the batteries and wip ... Sony Cyber-shot DSC-W55 Digital Camera

Kodak EasyShare M853 Digital Camera lens error 122,1,0,0

Best to send in for service.\015\012\015\012free estimate \015\012http://www.advancecamera.com/repair/ ... Kodak EasyShare M853 Digital Camera

My Canon PowerShot SD850 IS has a lens that is stuck in the extended position. I get a screen that says lens error, restart camera, but when I try to connect to the software, I get a screen on the computer telling me the computer cannot detect the camera. Battery is freshly charged, and I get the little yellow bird picture on the camera when I turn it on. It beeps about 4 times, and then turns off. Is there a safe way to get the lens to retract?

Don't play around with that lens, you can do more damage to the camera and focus with some of the stuff people tell you to try. Your camera just needs to be serviced and you'll be working great again. The shop that specializes in service for the powe ... Canon PowerShot SD850 IS Digital Camera

Lens will not retract - getting error message says: Lens error. Camera will not turn off or take a picture. Battery worn out but new ones put in and still can't get it to retract.

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Nikon COOLPIX L18 Digital Camera

When I turn it on it has a lens error 111,0,0,0, then it goes off showing lens error 221,0,0,0. I can't get it to come on.

Try these procedures. ... Kodak EasyShare C613 Digital Camera

When i switch on my kodak easy share c613 camera, it displays lens error:111,0,0,0 followed by lens error :221,0,0,0 and then goes off.please help.

Good\012 day,This is a common problem and sometimes can be fixed.Please\012 see details on my tip on how to fix this error here: ... Kodak EasyShare C613 Digital Camera

Lens doesn't retract when cover hits it. Only way to get lens to retract is to take out battery, put it back in, and then the lens slooooowly retracts, but will bounce back out if cover is closed quickly...Going to Europe in 2 days..should I buy a new camera???

The original problem was a camera with jammed lens mechanism or faulty lens motor. I think the camera had been replaced.The following post is directed to new users following up on this thread, as the original problem had already been sort ... Olympus Stylus 400 Digital Camera

My lens keeps saying lens error 113,0,0,0 and the lens would not get open each time I turn it on.The message is being persistent at every time I press on

Lens errors are NOT the sole ownership of Canon. These occur for ALL cameras with telescopic lens barrels. It's a very common problem in digital cameras. Canon sticks out from the other vendors because they used the cryptic "E18" error code to ... Kodak EasyShare M853 Digital Camera

Lens jammed how do i remove the lens motor so i can re-align the gears. the camera was dropped and partly disloged the retractable lens. I have removed the lens unit from the housing and think i have a fair idea as to how to reseat the mechanism once I get the motor off retractable lens isn't working

The lens needs to be removed.  The camera case can be taken apart by using a small philips screw driver and a small flat head.\015\012Take the batteries out. Have a nice flat space to lay the screws out.  Pry out the little chrome piece wit ... Sony Cyber-shot DSC-S700 Digital Camera

Lens error my camera keeps saying lens error and then shuts off my lens won't come out and it says lens error 111,0,0,76 i am getting really frustrated

Hello \015\012\015\012it may be a bug or caused by impact damage, even the technical support team doesn't have the meaning of that error code but for troubleshooting you can call 1 800 235 6325 opt. 12 or go to ... Kodak EasyShare C613 Digital Camera

When i turn camera on get blue screen that has date and time than in black letters i get lens error 221,0,0,0 and camera goes off

Hi there please follow the steps and let me know the result.\012\0121. Ensure batteries are fully charged & clean the battery connector point in side the battery compartment.\012\0122. Look carefully between the lens and the camera bo ... Kodak EasyShare C613 Digital Camera

KODAK C613 SAY LENS ERROR221,0,0,0 - Kodak EasyShare C613 Digital Camera

The gear inside the camera is jammed. Needs to be disassembled to repair. ... Kodak EasyShare C613 Digital Camera

Nikon coolpix 5000 zoom lens is stuck in extended position when battery died. replacing battery I now get error message: Remove lens cap. but the cap is off- I cant get the lens to retract.

... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2891 seconds