Having problems with your Kodak EasyShare C633 Digital Camera ?

How to set time & date . I changed batteries. I need to reset time & date

Answers :

\015\012To set the Date/time on your camera, kindly use these steps:
  1. Turn on the camera.
  2. \015\012
  3. Press the Menu button.
  4. \015\012
  5. If you see a Setup tab, press the Right arrow button to highlight the tab.
    If you don't see a Setup tab, press the Down arrow button to select Setup, then press the OK button.
  6. \015\012
  7. Press the Down arrow button to choose Date and Time, then press the OK button.
  8. \015\012
  9. Press the Right/Left arrow buttons to move between year, month, and date.
    Press (or press and hold) the Up/Down arrow buttons to scroll through the year, month, and date.
    Use the same procedure to set the time.
  10. \015\012
  11. When finished, press the OK button.
\015\012Hope this solves your problem. Thanks for using FixYa
Repair Help & Product Troubleshooting for Kodak EasyShare C633 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have had my S9600 for 4 years, for most of that time, when i changed the batteries, all my settings remained the same. Now, when i change the batteries, every setting has returned to factory standard (stupid beeps and whirring noises, no date etc) and i have to reset everything. The user manual has no mention of an internal battery, but i figure there must be one and it now needs replacing. How do I do this?

My camera has refused to power up despite fresh batteries - I have had no response. I left it overnight as suggested in the manual - but still nothing. It hasn't been used for a few months and was left without batteries for fear of leaking. Any ideas ... Fuji Finepix S9600 Digital Camera

How to set time & date . I changed batteries. I need to reset time & date

Hi,\015\012\015\012To set the Date/time on your camera, kindly use these steps:\015\012\015\012Turn on the camera.\015\012Press the Menu button.\015\012If you s ... Kodak EasyShare C633 Digital Camera

Every time I change the battery on the coolpix 995 I have to reset date and time and all other settings. I never had to do this with my 990. How do I keep all settings , including film quality , unchanged during battery change?

Your problem is that your camera actually has two batteries. There's the obvious user-accessible one but there's also a tiny rechargeable one hidden inside the camera which recharges from the main battery. The smaller battery is designed to provide h ... Nikon Coolpix 995 Digital Camera

Every time I turn my camera off I have to reset the time and date when I turn it back on. When I first got this camera I could set the time and date and it would stay set until I changed the batteries. what is the problem and how do I fix it?

The small internal battery has died.It will need to be replaced at a camera repair center. ... Polaroid A500 Digital Camera

How do you set the date on the Pentax Optio E50? After charging batteries, I inadvertently pressed ok when date option came up and is now showing last year. I've don this a few times and can't figure out how to change the date before the batteries need charging again.

The date and time can be changed in the "setup" menu. ... Pentax Optio E50 Digital Camera

Every time I switch it on it asks me to reset the date and time settings. The batteries are fine and I don't recall changing any setting to make it do this.

On the left hand side of the camera there is a little batter hatch, above a screw hole. It has a number written on it. Pull this out and replace the battery in it. This is the time and date battery. ... Canon PowerShot SX100 IS Digital Camera

Need to set date and time at each starting. have changed 1220 battery what could be the reason

You need to replace an internal battery that saves the date and time:http://www.ehow.com/how_6864385_do-battery-canon-powershot-a410_.html ... Canon PowerShot A520 Digital Camera

Everytime I change the battery I need to reset the date and time

... Kodak EasyShare Z1012 IS Digital Camera

I am trying to set date time in my camera(canon sx110is). But in every power on it is reseted. Whatever date i am setting in this camera is not stored in the memory. In every power on it asking for setting date and time. I need help in this regard.

You have to change the 'date battery'. Use the user manual to find its location.\015\012\015\012Mine is Canon A520, located beside the cable link sockets. Battery is CR 1220. ... Digital Cameras

When ever i change batteries i have reset date. taking batteries out even for a few seconds the date and time has to be reset

... Kodak EasyShare CX4200 Digital Camera

My HP photosmart R967 worked great until it said it was out of battery and shutting down. Now I can't get it to charge, and it won't turn on. Strange thing, when it's on its' little dock charger, it turns on to a screen asking you to set the date and time, then won't set it. My husband thinks it needs a new battery ---- help! I need my camera!

... Digital Cameras

Sony Cyber-Shot DSC-P31 Digital Camera- the internal button battery will no longer hold a charge to remember the date settings and is apparently discharging the AA batteries by attempting recharge. I have to remove the AA batteries after using the camera each time and reset the date. Is there a way to access and replace this internal button battery?

Only with screwdriver and soldering tool :-( ... Sony Cyber-Shot DSC-P31 Digital Camera

Not really sure if this is a problem? I have an Olympus E-500 and E-510. When I changes settings on the E-500 (ISO, White Balance, Auto-Focus Mode etc.) it remembers them when I switch it off. The E-510 doesn't. Is it supposed to work this way or is there an obscure setting I need to change? It remembers the time and date and the quelity settings ok. Thanks in advance for any help you can give me.

If you are shooting in the Auto mode and make the changes when power the camera off it will reset back to factory defaults. If you change the dial to P mode, make those same adjustments and power the camera off and then on again it should maintain t ... Olympus Digital Cameras

I set the date by instructions. But, the next time I use camera the date has changed. I have to reset correct date before taking photos each time.

... Kodak EasyShare Z710 Digital Camera

Date and time setting dont save, I changed the CR 1220 battery. Still doesnt save. Every time I turn on the camera the date / time setup appears.

In another forum I found a solution: \015\012\015\012Remove the watch battery from the cameraCarefully bend the contacts inside the camera toward the opening that the battery fits into. - I used a heavy safety pin to bend the contac ... Canon PowerShot S5 IS Digital Camera

I cant seem to change the date and time on my recently purchased Insignia Model NS-DSC1110A. There appears to be no options within the menu mode, only to add date and time to photos taken so I removed the batteries, removed the SD card, lookd for a reset button, nothing seems to work. HELP!!

Open the menu, and navigate to the middle icon, then down to "simple mode". Turn off "simple mode" to show all menu options ... Insignia NSDSC10A Digital Camera

I have an agfa Photo waterproof compact 109uw and i am trying to change the date on it. I go 'menu' then 'setup' then down to 'date & time' then across and change the date setting 'day, month, year' then down to time (which changed fine for me) but when i go back to 'date & time" it reverts back to the original date. What am i supposed to press to set the date?! thanks helen

... Digital Cameras

My wife's Kodak Easyshare V1253 has to be reset (date and time) every time we replace the battery. What could the problem be? Also, it takes too long to take one picture from another (probably setting regarding display time). Other than that, great camera!

Regarding the date and time, Actually its normal everytime you removed the battery you need to reset the date its is because the camera doesnt have a internal or built-in battery that can run the internal clock or maintain the date settings., ... Kodak EASYSHARE V1253 Digital Camera

Hi can you please tell me something in relation to my camera. I have a Panasonic DMC LX2 digital camera and I would like to know how to set the date to be used whilst I'm taking photo's, so when I go to print my photo's the date is on them? Thankyou Kane correcting date, time and etc I entered it wrong and need to change it.

The clock-setting instructions are on page 20 of the manual.The date and time (and a lot more) are stored with every picture in its EXIF ... Kodak Easyshare M753 Digital Camera

Cannon 5 D, Shuttle want work, when putting the battery in the red light want come on. Top display shows information. I change the time and date battery, I also took both batteries out to reset. Nothing

I packed it up and mailed it to a service company. ... Canon Digital Cameras

Kyocera M410 resets date and time when changing batteries

There are tiny Li batteries to maintain the short term memory for interim period. Normally they last very long but unexpected can be expected. You may not have enough tools to open it & reach there. Either go to camera repair or just entering it ... Kyocera Finecam M410R Digital Camera

Kyocera M410 resets date and time when changing batteries

... Kyocera Finecam M410R Digital Camera

When battery is changed date and image size need resetting

These units have a small internal battery, similar to a coin cell used in hearing aids, except that it has solder tabs so it can be mounted to the pcbd. You need the internal battery changed. ... Fuji FinePix F700 Digital Camera

Have to reset camera every time i change the batteries why is the camera loosing its settings. is an internal battery failing

Found out there is a battery on the board inside the camera (inacssebile) so will have to put up with the problem for now ... Fuji Digital Cameras

Date/Time Set I dropped the camera and now, when I turn it on, the date and time have reset to zero and I have to set it all again before I can take a picture. Is it in need of repair or is there something I can do?

I'm an imagining salesman at Circuit City and to tell you the truth I suggest just getting a new camera if you can afford it. This camera is well off in years. Most digital cameras aren't really meant to last too long. Don't get me wrong, they are ab ... Canon PowerShot A410 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2951 seconds